netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Jose Abreu <Jose.Abreu@synopsys.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Jose Abreu <joabreu@synopsys.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com, netdev@vger.kernel.org
Subject: [PATCH net-next v2 4/7] net: stmmac/xpcs: convert to pcs_validate()
Date: Wed, 26 Jan 2022 10:26:10 +0000	[thread overview]
Message-ID: <E1nCfVC-005RdF-FZ@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <YfEhaK7VtJ4oru03@shell.armlinux.org.uk>

stmmac explicitly calls the xpcs driver to validate the ethtool
linkmodes. This is no longer necessary as phylink now supports
validation through a PCS method. Convert both drivers to use this
new mechanism.

Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  5 ----
 drivers/net/pcs/pcs-xpcs.c                    | 27 ++++++++-----------
 include/linux/pcs/pcs-xpcs.h                  |  2 --
 3 files changed, 11 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index bd20920daf7b..029f21b9d452 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -940,7 +940,6 @@ static void stmmac_validate(struct phylink_config *config,
 			    unsigned long *supported,
 			    struct phylink_link_state *state)
 {
-	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mac_supported) = { 0, };
 
 	/* This is very similar to phylink_generic_validate() except that
@@ -958,10 +957,6 @@ static void stmmac_validate(struct phylink_config *config,
 
 	linkmode_and(supported, supported, mac_supported);
 	linkmode_and(state->advertising, state->advertising, mac_supported);
-
-	/* If PCS is supported, check which modes it supports. */
-	if (priv->hw->xpcs)
-		xpcs_validate(priv->hw->xpcs, supported, state);
 }
 
 static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index f45821524fab..61418d4dc0cd 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -632,35 +632,29 @@ static void xpcs_resolve_pma(struct dw_xpcs *xpcs,
 	}
 }
 
-void xpcs_validate(struct dw_xpcs *xpcs, unsigned long *supported,
-		   struct phylink_link_state *state)
+static int xpcs_validate(struct phylink_pcs *pcs, unsigned long *supported,
+			 const struct phylink_link_state *state)
 {
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(xpcs_supported);
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(xpcs_supported) = { 0, };
 	const struct xpcs_compat *compat;
+	struct dw_xpcs *xpcs;
 	int i;
 
-	/* phylink expects us to report all supported modes with
-	 * PHY_INTERFACE_MODE_NA, just don't limit the supported and
-	 * advertising masks and exit.
-	 */
-	if (state->interface == PHY_INTERFACE_MODE_NA)
-		return;
-
-	linkmode_zero(xpcs_supported);
-
+	xpcs = phylink_pcs_to_xpcs(pcs);
 	compat = xpcs_find_compat(xpcs->id, state->interface);
 
-	/* Populate the supported link modes for this
-	 * PHY interface type
+	/* Populate the supported link modes for this PHY interface type.
+	 * FIXME: what about the port modes and autoneg bit? This masks
+	 * all those away.
 	 */
 	if (compat)
 		for (i = 0; compat->supported[i] != __ETHTOOL_LINK_MODE_MASK_NBITS; i++)
 			set_bit(compat->supported[i], xpcs_supported);
 
 	linkmode_and(supported, supported, xpcs_supported);
-	linkmode_and(state->advertising, state->advertising, xpcs_supported);
+
+	return 0;
 }
-EXPORT_SYMBOL_GPL(xpcs_validate);
 
 void xpcs_get_interfaces(struct dw_xpcs *xpcs, unsigned long *interfaces)
 {
@@ -1120,6 +1114,7 @@ static const struct xpcs_id xpcs_id_list[] = {
 };
 
 static const struct phylink_pcs_ops xpcs_phylink_ops = {
+	.pcs_validate = xpcs_validate,
 	.pcs_config = xpcs_config,
 	.pcs_get_state = xpcs_get_state,
 	.pcs_link_up = xpcs_link_up,
diff --git a/include/linux/pcs/pcs-xpcs.h b/include/linux/pcs/pcs-xpcs.h
index 3126a4924d92..266eb26fb029 100644
--- a/include/linux/pcs/pcs-xpcs.h
+++ b/include/linux/pcs/pcs-xpcs.h
@@ -31,8 +31,6 @@ void xpcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
 		  phy_interface_t interface, int speed, int duplex);
 int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
 		   unsigned int mode);
-void xpcs_validate(struct dw_xpcs *xpcs, unsigned long *supported,
-		   struct phylink_link_state *state);
 void xpcs_get_interfaces(struct dw_xpcs *xpcs, unsigned long *interfaces);
 int xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns,
 		    int enable);
-- 
2.30.2


  parent reply	other threads:[~2022-01-26 10:26 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-26 10:24 [PATCH net-next v2 0/7] net: stmmac/xpcs: modernise PCS support Russell King (Oracle)
2022-01-26 10:25 ` [PATCH net-next v2 1/7] net: xpcs: add support for retrieving supported interface modes Russell King (Oracle)
2022-01-26 10:26 ` [PATCH net-next v2 2/7] net: stmmac: convert to phylink_get_linkmodes() Russell King (Oracle)
2022-01-26 10:26 ` [PATCH net-next v2 3/7] net: stmmac: fill in supported_interfaces Russell King (Oracle)
2022-01-26 10:26 ` Russell King (Oracle) [this message]
2022-01-26 10:26 ` [PATCH net-next v2 5/7] net: stmmac: remove phylink_config.pcs_poll usage Russell King (Oracle)
2022-01-26 10:26 ` [PATCH net-next v2 6/7] net: stmmac: convert to phylink_generic_validate() Russell King (Oracle)
2022-01-26 10:26 ` [PATCH net-next v2 7/7] net: stmmac: use .mac_select_pcs() interface Russell King (Oracle)
2025-10-17 17:00 ` [PATCH net-next v2 0/7] net: stmmac/xpcs: modernise PCS support Lad, Prabhakar
2025-10-17 17:02   ` Lad, Prabhakar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1nCfVC-005RdF-FZ@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=Jose.Abreu@synopsys.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=hkallweit1@gmail.com \
    --cc=joabreu@synopsys.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).