From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: netdev@vger.kernel.org, UNGLinuxDriver@microchip.com
Cc: Andrew Lunn <andrew@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Florian Fainelli <f.fainelli@gmail.com>,
George McCollister <george.mccollister@gmail.com>,
Jakub Kicinski <kuba@kernel.org>,
Vivien Didelot <vivien.didelot@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
Woojung Huh <woojung.huh@microchip.com>
Subject: [PATCH CFT net-next 1/5] net: dsa: ar9331: convert to phylink_generic_validate()
Date: Thu, 27 Jan 2022 11:02:14 +0000 [thread overview]
Message-ID: <E1nD2Xe-005UcF-8m@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <YfJ7omKUSF6BY+CL@shell.armlinux.org.uk>
Populate the supported interfaces and MAC capabilities for the AR9331
DSA switch and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/dsa/qca/ar9331.c | 45 ++++++++----------------------------
1 file changed, 10 insertions(+), 35 deletions(-)
diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
index da0d7e68643a..3bda7015f0c1 100644
--- a/drivers/net/dsa/qca/ar9331.c
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -499,52 +499,27 @@ static enum dsa_tag_protocol ar9331_sw_get_tag_protocol(struct dsa_switch *ds,
return DSA_TAG_PROTO_AR9331;
}
-static void ar9331_sw_phylink_validate(struct dsa_switch *ds, int port,
- unsigned long *supported,
- struct phylink_link_state *state)
+static void ar9331_sw_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
{
- __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100;
switch (port) {
case 0:
- if (state->interface != PHY_INTERFACE_MODE_GMII)
- goto unsupported;
-
- phylink_set(mask, 1000baseT_Full);
- phylink_set(mask, 1000baseT_Half);
+ __set_bit(PHY_INTERFACE_MODE_GMII,
+ config->supported_interfaces);
+ config->mac_capabilities |= MAC_1000;
break;
case 1:
case 2:
case 3:
case 4:
case 5:
- if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
- goto unsupported;
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
break;
- default:
- linkmode_zero(supported);
- dev_err(ds->dev, "Unsupported port: %i\n", port);
- return;
}
-
- phylink_set_port_modes(mask);
- phylink_set(mask, Pause);
- phylink_set(mask, Asym_Pause);
-
- phylink_set(mask, 10baseT_Half);
- phylink_set(mask, 10baseT_Full);
- phylink_set(mask, 100baseT_Half);
- phylink_set(mask, 100baseT_Full);
-
- linkmode_and(supported, supported, mask);
- linkmode_and(state->advertising, state->advertising, mask);
-
- return;
-
-unsupported:
- linkmode_zero(supported);
- dev_err(ds->dev, "Unsupported interface: %d, port: %d\n",
- state->interface, port);
}
static void ar9331_sw_phylink_mac_config(struct dsa_switch *ds, int port,
@@ -697,7 +672,7 @@ static const struct dsa_switch_ops ar9331_sw_ops = {
.get_tag_protocol = ar9331_sw_get_tag_protocol,
.setup = ar9331_sw_setup,
.port_disable = ar9331_sw_port_disable,
- .phylink_validate = ar9331_sw_phylink_validate,
+ .phylink_get_caps = ar9331_sw_phylink_get_caps,
.phylink_mac_config = ar9331_sw_phylink_mac_config,
.phylink_mac_link_down = ar9331_sw_phylink_mac_link_down,
.phylink_mac_link_up = ar9331_sw_phylink_mac_link_up,
--
2.30.2
next prev parent reply other threads:[~2022-01-27 11:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-27 11:01 [PATCH CFT net-next 0/5] Trivial DSA conversions to phylink_generic_validate() Russell King (Oracle)
2022-01-27 11:02 ` Russell King (Oracle) [this message]
2022-01-27 11:02 ` [PATCH CFT net-next 2/5] net: dsa: bcm_sf2: convert " Russell King (Oracle)
2022-01-27 11:02 ` [PATCH CFT net-next 3/5] net: dsa: ksz8795: " Russell King (Oracle)
2022-01-27 11:02 ` [PATCH CFT net-next 4/5] net: dsa: qca8k: " Russell King (Oracle)
2022-01-27 11:02 ` [PATCH CFT net-next 5/5] net: dsa: xrs700x: " Russell King (Oracle)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1nD2Xe-005UcF-8m@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=george.mccollister@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=vivien.didelot@gmail.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).