From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Vladimir Oltean <olteanv@gmail.com>
Cc: Marek Beh__n <kabel@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
netdev@vger.kernel.org
Subject: [PATCH net-next 3/6] net: dsa: sja1105: use .mac_select_pcs() interface
Date: Fri, 25 Feb 2022 11:56:12 +0000 [thread overview]
Message-ID: <E1nNZCm-00Ab1e-Rv@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <YhjDvsSC1gZAYF74@shell.armlinux.org.uk>
Convert the PCS selection to use mac_select_pcs, which allows the PCS
to perform any validation it needs, and removes the need to set the PCS
in the mac_config() callback, delving into the higher DSA levels to do
so.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/dsa/sja1105/sja1105_main.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index e278bd86e3c6..b5c36f808df1 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1358,18 +1358,16 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
return sja1105_clocking_setup_port(priv, port);
}
-static void sja1105_mac_config(struct dsa_switch *ds, int port,
- unsigned int mode,
- const struct phylink_link_state *state)
+static struct phylink_pcs *
+sja1105_mac_select_pcs(struct dsa_switch *ds, int port, phy_interface_t iface)
{
- struct dsa_port *dp = dsa_to_port(ds, port);
struct sja1105_private *priv = ds->priv;
- struct dw_xpcs *xpcs;
-
- xpcs = priv->xpcs[port];
+ struct dw_xpcs *xpcs = priv->xpcs[port];
if (xpcs)
- phylink_set_pcs(dp->pl, &xpcs->pcs);
+ return &xpcs->pcs;
+
+ return NULL;
}
static void sja1105_mac_link_down(struct dsa_switch *ds, int port,
@@ -3137,7 +3135,7 @@ static const struct dsa_switch_ops sja1105_switch_ops = {
.port_max_mtu = sja1105_get_max_mtu,
.phylink_get_caps = sja1105_phylink_get_caps,
.phylink_validate = sja1105_phylink_validate,
- .phylink_mac_config = sja1105_mac_config,
+ .phylink_mac_select_pcs = sja1105_mac_select_pcs,
.phylink_mac_link_up = sja1105_mac_link_up,
.phylink_mac_link_down = sja1105_mac_link_down,
.get_strings = sja1105_get_strings,
--
2.30.2
next prev parent reply other threads:[~2022-02-25 11:56 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-25 11:55 [PATCH net-next 0/6] net: dsa: sja1105: phylink updates Russell King (Oracle)
2022-02-25 11:56 ` [PATCH net-next 1/6] net: dsa: sja1105: populate supported_interfaces Russell King (Oracle)
2022-02-25 11:56 ` Russell King (Oracle)
2022-02-25 11:58 ` Vladimir Oltean
2022-02-25 12:08 ` Russell King (Oracle)
2022-02-25 12:15 ` Vladimir Oltean
2022-02-25 12:41 ` Russell King (Oracle)
2022-02-25 11:56 ` [PATCH net-next 2/6] net: dsa: sja1105: remove interface checks Russell King (Oracle)
2022-02-25 11:56 ` Russell King (Oracle) [this message]
2022-02-25 11:56 ` [PATCH net-next 4/6] net: dsa: sja1105: mark as non-legacy Russell King (Oracle)
2022-02-25 11:56 ` [PATCH net-next 5/6] net: dsa: sja1105: convert to phylink_generic_validate() Russell King (Oracle)
2022-02-25 11:56 ` [PATCH net-next 6/6] net: dsa: sja1105: support switching between SGMII and 2500BASE-X Russell King (Oracle)
-- strict thread matches above, loose matches on Subject: below --
2022-02-25 11:59 [PATCH net-next v2 0/6] net: dsa: sja1105: phylink updates Russell King (Oracle)
2022-02-25 12:00 ` [PATCH net-next 3/6] net: dsa: sja1105: use .mac_select_pcs() interface Russell King (Oracle)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1nNZCm-00Ab1e-Rv@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kabel@kernel.org \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).