Netdev List
 help / color / mirror / Atom feed
From: Jaco Kroon <jaco@uls.co.za>
To: netdev@vger.kernel.org
Subject: [PATCH] net/pppoe: make number of hash bits configurable
Date: Wed, 17 May 2023 10:00:03 +0200	[thread overview]
Message-ID: <E1pzFCV-0005Ly-U7@plastiekpoot> (raw)

When running large numbers of pppoe connections, a bucket size of 16 may
be too small and 256 may be more appropriate.  This sacrifices some RAM
but should result in faster processing of incoming PPPoE frames.

On our systems we run upwards of 150 PPPoE connections at any point in
time, and we suspect we're starting to see the effects of this small
number of buckets.

The legal values according to pppoe.c is anything that when 8 is divided
by that results in a modulo of 0, ie, 1, 2, 4 and 8.

The size of the per-underlying-interface structure is:

sizeof(rwlock_t) + sizeof(pppox_sock*) * PPPOE_HASH_SIZE.

Assuming a 64-bit pointer this will result in just over a 2KiB structure
for PPPOE_HASH_BITS=8, which will likely result in a 4KiB allocation,
which for us at least is acceptable.

Not sure what the minimum allocation size is, and thus if values of 1
and 2 truly make sense.  Default results in historic sizing and
behaviour.

Signed-off-by: Jaco Kroon <jaco@uls.co.za>
---
 drivers/net/ppp/Kconfig | 34 ++++++++++++++++++++++++++++++++++
 drivers/net/ppp/pppoe.c |  2 +-
 2 files changed, 35 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ppp/Kconfig b/drivers/net/ppp/Kconfig
index ac4d162d9455..2fbcae31fc02 100644
--- a/drivers/net/ppp/Kconfig
+++ b/drivers/net/ppp/Kconfig
@@ -129,6 +129,40 @@ config PPPOE
 	  which contains instruction on how to use this driver (under
 	  the heading "Kernel mode PPPoE").
 
+choice
+	prompt "Number of PPPoE hash bits"
+	default PPPOE_HASH_BITS_4
+	depends on PPPOE
+	help
+		Select the number of bits used for hashing PPPoE interfaces.
+
+		Larger sizes reduces the risk of hash collisions at the cost
+		of slightly increased memory usage.
+
+		This hash table is on a per outer ethernet interface.
+
+config PPPOE_HASH_BITS_2
+	bool "1 bit (2 buckets)"
+
+config PPPOE_HASH_BITS_2
+	bool "2 bits (4 buckets)"
+
+config PPPOE_HASH_BITS_4
+	bool "4 bits (16 buckets)"
+
+config PPPOE_HASH_BITS_8
+	bool "8 bits (256 buckets)"
+
+endchoice
+
+config PPPOE_HASH_BITS
+	int
+	default 1 if PPPOE_HASH_BITS_1
+	default 2 if PPPOE_HASH_BITS_2
+	default 4 if PPPOE_HASH_BITS_4
+	default 8 if PPPOE_HASH_BITS_8
+	default 4
+
 config PPTP
 	tristate "PPP over IPv4 (PPTP)"
 	depends on PPP && NET_IPGRE_DEMUX
diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c
index ce2cbb5903d7..3b79c603b936 100644
--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -80,7 +80,7 @@
 
 #include <linux/uaccess.h>
 
-#define PPPOE_HASH_BITS 4
+#define PPPOE_HASH_BITS CONFIG_PPPOE_HASH_BITS
 #define PPPOE_HASH_SIZE (1 << PPPOE_HASH_BITS)
 #define PPPOE_HASH_MASK	(PPPOE_HASH_SIZE - 1)
 
-- 
2.39.3


             reply	other threads:[~2023-05-17 11:39 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-17  8:00 Jaco Kroon [this message]
2023-05-17 12:10 ` [PATCH] net/pppoe: make number of hash bits configurable patchwork-bot+netdevbpf
2023-05-17 12:35   ` Jaco Kroon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1pzFCV-0005Ly-U7@plastiekpoot \
    --to=jaco@uls.co.za \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox