netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	netdev@vger.kernel.org
Subject: [PATCH net-next] net: phylink: provide phylink_pcs_config() and phylink_pcs_link_up()
Date: Tue, 23 May 2023 16:31:50 +0100	[thread overview]
Message-ID: <E1q1TzK-007Exd-Rs@rmk-PC.armlinux.org.uk> (raw)

Add two helper functions for calling PCS methods. phylink_pcs_config()
allows us to handle PCS configuration specifics in one location, rather
than the two call sites. phylink_pcs_link_up() gives us consistency.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phylink.c | 54 ++++++++++++++++++++++++---------------
 1 file changed, 34 insertions(+), 20 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 96b418f07f8a..530bfafd4f81 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -992,6 +992,26 @@ static void phylink_resolve_an_pause(struct phylink_link_state *state)
 	}
 }
 
+static int phylink_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+			      const struct phylink_link_state *state,
+			      bool permit_pause_to_mac)
+{
+	if (!pcs)
+		return 0;
+
+	return pcs->ops->pcs_config(pcs, mode, state->interface,
+				    state->advertising, permit_pause_to_mac);
+}
+
+static void phylink_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
+				phy_interface_t interface, int speed,
+				int duplex)
+{
+	if (pcs && pcs->ops->pcs_link_up)
+		pcs->ops->pcs_link_up(pcs, mode, interface, speed, duplex);
+
+}
+
 static void phylink_pcs_poll_stop(struct phylink *pl)
 {
 	if (pl->cfg_link_an_mode == MLO_AN_INBAND)
@@ -1075,18 +1095,15 @@ static void phylink_major_config(struct phylink *pl, bool restart,
 
 	phylink_mac_config(pl, state);
 
-	if (pl->pcs) {
-		err = pl->pcs->ops->pcs_config(pl->pcs, pl->cur_link_an_mode,
-					       state->interface,
-					       state->advertising,
-					       !!(pl->link_config.pause &
-						  MLO_PAUSE_AN));
-		if (err < 0)
-			phylink_err(pl, "pcs_config failed: %pe\n",
-				    ERR_PTR(err));
-		if (err > 0)
-			restart = true;
-	}
+	err = phylink_pcs_config(pl->pcs, pl->cur_link_an_mode, state,
+				 !!(pl->link_config.pause &
+				    MLO_PAUSE_AN));
+	if (err < 0)
+		phylink_err(pl, "pcs_config failed: %pe\n",
+			    ERR_PTR(err));
+	else if (err > 0)
+		restart = true;
+
 	if (restart)
 		phylink_mac_pcs_an_restart(pl);
 
@@ -1137,11 +1154,9 @@ static int phylink_change_inband_advert(struct phylink *pl)
 	 * restart negotiation if the pcs_config() helper indicates that
 	 * the programmed advertisement has changed.
 	 */
-	ret = pl->pcs->ops->pcs_config(pl->pcs, pl->cur_link_an_mode,
-				       pl->link_config.interface,
-				       pl->link_config.advertising,
-				       !!(pl->link_config.pause &
-					  MLO_PAUSE_AN));
+	ret = phylink_pcs_config(pl->pcs, pl->cur_link_an_mode,
+				 &pl->link_config,
+				 !!(pl->link_config.pause & MLO_PAUSE_AN));
 	if (ret < 0)
 		return ret;
 
@@ -1273,9 +1288,8 @@ static void phylink_link_up(struct phylink *pl,
 
 	pl->cur_interface = link_state.interface;
 
-	if (pl->pcs && pl->pcs->ops->pcs_link_up)
-		pl->pcs->ops->pcs_link_up(pl->pcs, pl->cur_link_an_mode,
-					  pl->cur_interface, speed, duplex);
+	phylink_pcs_link_up(pl->pcs, pl->cur_link_an_mode, pl->cur_interface,
+			    speed, duplex);
 
 	pl->mac_ops->mac_link_up(pl->config, pl->phydev, pl->cur_link_an_mode,
 				 pl->cur_interface, speed, duplex,
-- 
2.30.2


             reply	other threads:[~2023-05-23 15:32 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-23 15:31 Russell King (Oracle) [this message]
2023-05-25  5:30 ` [PATCH net-next] net: phylink: provide phylink_pcs_config() and phylink_pcs_link_up() patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1q1TzK-007Exd-Rs@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).