From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
netdev@vger.kernel.org
Subject: [PATCH net-next 2/2] net: dsa: mv88e6xxx: move link forcing to mac_prepare/mac_finish
Date: Thu, 25 May 2023 11:38:50 +0100 [thread overview]
Message-ID: <E1q28Ms-007tpv-2T@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <ZG86ocZm4YmsWIJN@shell.armlinux.org.uk>
Move the link forcing out of mac_config() and into the mac_prepare()
and mac_finish() methods. This results in no change to the order in
which these operations are performed, but does mean when we convert
mv88e6xxx to phylink_pcs support, we will continue to preserve this
ordering.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/dsa/mv88e6xxx/chip.c | 65 ++++++++++++++++++++++----------
1 file changed, 45 insertions(+), 20 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 64a2f2f83735..5bbe95fa951c 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -841,29 +841,38 @@ static void mv88e6xxx_get_caps(struct dsa_switch *ds, int port,
}
}
+static int mv88e6xxx_mac_prepare(struct dsa_switch *ds, int port,
+ unsigned int mode, phy_interface_t interface)
+{
+ struct mv88e6xxx_chip *chip = ds->priv;
+ int err = 0;
+
+ /* In inband mode, the link may come up at any time while the link
+ * is not forced down. Force the link down while we reconfigure the
+ * interface mode.
+ */
+ if (mode == MLO_AN_INBAND &&
+ chip->ports[port].interface != interface &&
+ chip->info->ops->port_set_link) {
+ mv88e6xxx_reg_lock(chip);
+ err = chip->info->ops->port_set_link(chip, port,
+ LINK_FORCED_DOWN);
+ mv88e6xxx_reg_unlock(chip);
+ }
+
+ return err;
+}
+
static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port,
unsigned int mode,
const struct phylink_link_state *state)
{
struct mv88e6xxx_chip *chip = ds->priv;
- struct mv88e6xxx_port *p;
int err = 0;
- p = &chip->ports[port];
-
mv88e6xxx_reg_lock(chip);
if (mode != MLO_AN_PHY || !mv88e6xxx_phy_is_internal(ds, port)) {
- /* In inband mode, the link may come up at any time while the
- * link is not forced down. Force the link down while we
- * reconfigure the interface mode.
- */
- if (mode == MLO_AN_INBAND &&
- p->interface != state->interface &&
- chip->info->ops->port_set_link)
- chip->info->ops->port_set_link(chip, port,
- LINK_FORCED_DOWN);
-
err = mv88e6xxx_port_config_interface(chip, port,
state->interface);
if (err && err != -EOPNOTSUPP)
@@ -880,24 +889,38 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port,
err = 0;
}
+err_unlock:
+ mv88e6xxx_reg_unlock(chip);
+
+ if (err && err != -EOPNOTSUPP)
+ dev_err(ds->dev, "p%d: failed to configure MAC/PCS\n", port);
+}
+
+static int mv88e6xxx_mac_finish(struct dsa_switch *ds, int port,
+ unsigned int mode, phy_interface_t interface)
+{
+ struct mv88e6xxx_chip *chip = ds->priv;
+ int err = 0;
+
/* Undo the forced down state above after completing configuration
* irrespective of its state on entry, which allows the link to come
* up in the in-band case where there is no separate SERDES. Also
* ensure that the link can come up if the PPU is in use and we are
* in PHY mode (we treat the PPU as an effective in-band mechanism.)
*/
+ mv88e6xxx_reg_lock(chip);
+
if (chip->info->ops->port_set_link &&
- ((mode == MLO_AN_INBAND && p->interface != state->interface) ||
+ ((mode == MLO_AN_INBAND &&
+ chip->ports[port].interface != interface) ||
(mode == MLO_AN_PHY && mv88e6xxx_port_ppu_updates(chip, port))))
- chip->info->ops->port_set_link(chip, port, LINK_UNFORCED);
+ err = chip->info->ops->port_set_link(chip, port, LINK_UNFORCED);
- p->interface = state->interface;
-
-err_unlock:
mv88e6xxx_reg_unlock(chip);
- if (err && err != -EOPNOTSUPP)
- dev_err(ds->dev, "p%d: failed to configure MAC/PCS\n", port);
+ chip->ports[port].interface = interface;
+
+ return err;
}
static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port,
@@ -7002,7 +7025,9 @@ static const struct dsa_switch_ops mv88e6xxx_switch_ops = {
.port_teardown = mv88e6xxx_port_teardown,
.phylink_get_caps = mv88e6xxx_get_caps,
.phylink_mac_link_state = mv88e6xxx_serdes_pcs_get_state,
+ .phylink_mac_prepare = mv88e6xxx_mac_prepare,
.phylink_mac_config = mv88e6xxx_mac_config,
+ .phylink_mac_finish = mv88e6xxx_mac_finish,
.phylink_mac_an_restart = mv88e6xxx_serdes_pcs_an_restart,
.phylink_mac_link_down = mv88e6xxx_mac_link_down,
.phylink_mac_link_up = mv88e6xxx_mac_link_up,
--
2.30.2
next prev parent reply other threads:[~2023-05-25 10:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-25 10:38 [PATCH net-next 0/2] net: dsa: mv88e6xxx: prepare for phylink_pcs conversion Russell King (Oracle)
2023-05-25 10:38 ` [PATCH net-next 1/2] net: dsa: add support for mac_prepare() and mac_finish() calls Russell King (Oracle)
2023-05-26 9:18 ` Simon Horman
2023-05-25 10:38 ` Russell King (Oracle) [this message]
2023-05-26 9:18 ` [PATCH net-next 2/2] net: dsa: mv88e6xxx: move link forcing to mac_prepare/mac_finish Simon Horman
2023-05-26 9:50 ` [PATCH net-next 0/2] net: dsa: mv88e6xxx: prepare for phylink_pcs conversion patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1q28Ms-007tpv-2T@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).