From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Jakub Kicinski <kuba@kernel.org>,
Jiawen Wu <jiawenwu@trustnetic.com>,
Jose Abreu <joabreu@synopsys.com>,
Jose Abreu <Jose.Abreu@synopsys.com>,
linux-arm-kernel@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Mengyuan Lou <mengyuanlou@net-swift.com>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Vladimir Oltean <olteanv@gmail.com>
Subject: [PATCH net-next 09/10] net: pcs: xpcs: drop interface argument from xpcs_create*()
Date: Tue, 01 Oct 2024 17:04:51 +0100 [thread overview]
Message-ID: <E1svfMp-005ZIp-UX@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <ZvwdKIp3oYSenGdH@shell.armlinux.org.uk>
The XPCS sub-driver no longer uses the "interface" argument to the
xpcs_create_mdiodev() and xpcs_create_fwnode() functions. Remove
this now unnecessary argument, updating the stmmac driver
appropriately.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 7 +++----
drivers/net/pcs/pcs-xpcs.c | 10 +++-------
include/linux/pcs/pcs-xpcs.h | 6 ++----
3 files changed, 8 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 03f90676b3ad..0c7d81ddd440 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -500,23 +500,22 @@ int stmmac_pcs_setup(struct net_device *ndev)
struct fwnode_handle *devnode, *pcsnode;
struct dw_xpcs *xpcs = NULL;
struct stmmac_priv *priv;
- int addr, mode, ret;
+ int addr, ret;
priv = netdev_priv(ndev);
- mode = priv->plat->phy_interface;
devnode = priv->plat->port_node;
if (priv->plat->pcs_init) {
ret = priv->plat->pcs_init(priv);
} else if (fwnode_property_present(devnode, "pcs-handle")) {
pcsnode = fwnode_find_reference(devnode, "pcs-handle", 0);
- xpcs = xpcs_create_fwnode(pcsnode, mode);
+ xpcs = xpcs_create_fwnode(pcsnode);
fwnode_handle_put(pcsnode);
ret = PTR_ERR_OR_ZERO(xpcs);
} else if (priv->plat->mdio_bus_data &&
priv->plat->mdio_bus_data->pcs_mask) {
addr = ffs(priv->plat->mdio_bus_data->pcs_mask) - 1;
- xpcs = xpcs_create_mdiodev(priv->mii, addr, mode);
+ xpcs = xpcs_create_mdiodev(priv->mii, addr);
ret = PTR_ERR_OR_ZERO(xpcs);
} else {
return 0;
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 9b61f97222b9..f25e7afdfdf5 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -1520,14 +1520,12 @@ static struct dw_xpcs *xpcs_create(struct mdio_device *mdiodev)
* xpcs_create_mdiodev() - create a DW xPCS instance with the MDIO @addr
* @bus: pointer to the MDIO-bus descriptor for the device to be looked at
* @addr: device MDIO-bus ID
- * @interface: requested PHY interface
*
* Return: a pointer to the DW XPCS handle if successful, otherwise -ENODEV if
* the PCS device couldn't be found on the bus and other negative errno related
* to the data allocation and MDIO-bus communications.
*/
-struct dw_xpcs *xpcs_create_mdiodev(struct mii_bus *bus, int addr,
- phy_interface_t interface)
+struct dw_xpcs *xpcs_create_mdiodev(struct mii_bus *bus, int addr)
{
struct mdio_device *mdiodev;
struct dw_xpcs *xpcs;
@@ -1554,7 +1552,7 @@ struct phylink_pcs *xpcs_create_pcs_mdiodev(struct mii_bus *bus, int addr)
{
struct dw_xpcs *xpcs;
- xpcs = xpcs_create_mdiodev(bus, addr, PHY_INTERFACE_MODE_NA);
+ xpcs = xpcs_create_mdiodev(bus, addr);
if (IS_ERR(xpcs))
return ERR_CAST(xpcs);
@@ -1565,7 +1563,6 @@ EXPORT_SYMBOL_GPL(xpcs_create_pcs_mdiodev);
/**
* xpcs_create_fwnode() - Create a DW xPCS instance from @fwnode
* @fwnode: fwnode handle poining to the DW XPCS device
- * @interface: requested PHY interface
*
* Return: a pointer to the DW XPCS handle if successful, otherwise -ENODEV if
* the fwnode device is unavailable or the PCS device couldn't be found on the
@@ -1573,8 +1570,7 @@ EXPORT_SYMBOL_GPL(xpcs_create_pcs_mdiodev);
* other negative errno related to the data allocations and MDIO-bus
* communications.
*/
-struct dw_xpcs *xpcs_create_fwnode(struct fwnode_handle *fwnode,
- phy_interface_t interface)
+struct dw_xpcs *xpcs_create_fwnode(struct fwnode_handle *fwnode)
{
struct mdio_device *mdiodev;
struct dw_xpcs *xpcs;
diff --git a/include/linux/pcs/pcs-xpcs.h b/include/linux/pcs/pcs-xpcs.h
index a4e2243ce647..758daabb76c7 100644
--- a/include/linux/pcs/pcs-xpcs.h
+++ b/include/linux/pcs/pcs-xpcs.h
@@ -72,10 +72,8 @@ int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
void xpcs_get_interfaces(struct dw_xpcs *xpcs, unsigned long *interfaces);
int xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns,
int enable);
-struct dw_xpcs *xpcs_create_mdiodev(struct mii_bus *bus, int addr,
- phy_interface_t interface);
-struct dw_xpcs *xpcs_create_fwnode(struct fwnode_handle *fwnode,
- phy_interface_t interface);
+struct dw_xpcs *xpcs_create_mdiodev(struct mii_bus *bus, int addr);
+struct dw_xpcs *xpcs_create_fwnode(struct fwnode_handle *fwnode);
void xpcs_destroy(struct dw_xpcs *xpcs);
struct phylink_pcs *xpcs_create_pcs_mdiodev(struct mii_bus *bus, int addr);
--
2.30.2
next prev parent reply other threads:[~2024-10-01 16:05 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-01 16:02 [PATCH net-next 00/10] net: pcs: xpcs: cleanups batch 1 Russell King (Oracle)
2024-10-01 16:04 ` [PATCH net-next 01/10] net: pcs: xpcs: move PCS reset to .pcs_pre_config() Russell King (Oracle)
2024-10-01 20:34 ` Serge Semin
2024-10-01 22:01 ` Russell King (Oracle)
2024-10-01 22:09 ` Andrew Lunn
2024-10-02 22:56 ` Serge Semin
2024-10-02 23:12 ` Andrew Lunn
2024-10-02 23:43 ` Serge Semin
2024-10-03 0:04 ` Andrew Lunn
2024-10-03 8:58 ` Russell King (Oracle)
2024-10-03 23:39 ` Serge Semin
2024-10-02 23:25 ` Russell King (Oracle)
2024-10-01 16:04 ` [PATCH net-next 02/10] net: pcs: xpcs: drop interface argument from internal functions Russell King (Oracle)
2024-10-01 16:04 ` [PATCH net-next 03/10] net: pcs: xpcs: get rid of xpcs_init_iface() Russell King (Oracle)
2024-10-01 16:04 ` [PATCH net-next 04/10] net: pcs: xpcs: add xpcs_destroy_pcs() and xpcs_create_pcs_mdiodev() Russell King (Oracle)
2024-10-01 16:04 ` [PATCH net-next 05/10] net: wangxun: txgbe: use phylink_pcs internally Russell King (Oracle)
2024-10-01 22:12 ` Andrew Lunn
2024-10-01 16:04 ` [PATCH net-next 06/10] net: dsa: sja1105: simplify static configuration reload Russell King (Oracle)
2024-10-01 16:04 ` [PATCH net-next 07/10] net: dsa: sja1105: call PCS config/link_up via pcs_ops structure Russell King (Oracle)
2024-10-01 16:04 ` [PATCH net-next 08/10] net: dsa: sja1105: use phylink_pcs internally Russell King (Oracle)
2024-10-01 16:04 ` Russell King (Oracle) [this message]
2024-10-01 16:04 ` [PATCH net-next 10/10] net: pcs: xpcs: make xpcs_do_config() and xpcs_link_up() internal Russell King (Oracle)
2024-10-03 0:40 ` [PATCH net-next 00/10] net: pcs: xpcs: cleanups batch 1 patchwork-bot+netdevbpf
2024-10-04 23:29 ` Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1svfMp-005ZIp-UX@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=Jose.Abreu@synopsys.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=jiawenwu@trustnetic.com \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mengyuanlou@net-swift.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).