From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
netdev@vger.kernel.org
Subject: [PATCH net-next v2] net: dsa: remove obsolete phylink dsa_switch operations
Date: Thu, 03 Oct 2024 12:52:17 +0100 [thread overview]
Message-ID: <E1swKNV-0060oN-1b@rmk-PC.armlinux.org.uk> (raw)
No driver now uses the DSA switch phylink members, so we can now remove
the method pointers, but we need to leave empty shim functions to allow
those drivers that do not provide phylink MAC operations structure to
continue functioning.
Signed-off-by: Russell King (oracle) <rmk+kernel@armlinux.org.uk>
---
Changes since v1 (a while ago):
- don't remove the shim functions and ops structure which will break
some DSA drivers that do not provide a phylink_mac_ops struct as
pointed out by Vladimir (thanks.)
include/net/dsa.h | 15 ---------------
net/dsa/dsa.c | 8 --------
net/dsa/port.c | 34 +---------------------------------
3 files changed, 1 insertion(+), 56 deletions(-)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index d7a6c2930277..72ae65e7246a 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -885,21 +885,6 @@ struct dsa_switch_ops {
*/
void (*phylink_get_caps)(struct dsa_switch *ds, int port,
struct phylink_config *config);
- struct phylink_pcs *(*phylink_mac_select_pcs)(struct dsa_switch *ds,
- int port,
- phy_interface_t iface);
- void (*phylink_mac_config)(struct dsa_switch *ds, int port,
- unsigned int mode,
- const struct phylink_link_state *state);
- void (*phylink_mac_link_down)(struct dsa_switch *ds, int port,
- unsigned int mode,
- phy_interface_t interface);
- void (*phylink_mac_link_up)(struct dsa_switch *ds, int port,
- unsigned int mode,
- phy_interface_t interface,
- struct phy_device *phydev,
- int speed, int duplex,
- bool tx_pause, bool rx_pause);
void (*phylink_fixed_state)(struct dsa_switch *ds, int port,
struct phylink_link_state *state);
/*
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 668c729946ea..09d2f5d4b3dd 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -1505,14 +1505,6 @@ static int dsa_switch_probe(struct dsa_switch *ds)
if (!ds->num_ports)
return -EINVAL;
- if (ds->phylink_mac_ops) {
- if (ds->ops->phylink_mac_select_pcs ||
- ds->ops->phylink_mac_config ||
- ds->ops->phylink_mac_link_down ||
- ds->ops->phylink_mac_link_up)
- return -EINVAL;
- }
-
if (np) {
err = dsa_switch_parse_of(ds, np);
if (err)
diff --git a/net/dsa/port.c b/net/dsa/port.c
index 25258b33e59e..f1e96706a701 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -1579,40 +1579,19 @@ static struct phylink_pcs *
dsa_port_phylink_mac_select_pcs(struct phylink_config *config,
phy_interface_t interface)
{
- struct dsa_port *dp = dsa_phylink_to_port(config);
- struct phylink_pcs *pcs = ERR_PTR(-EOPNOTSUPP);
- struct dsa_switch *ds = dp->ds;
-
- if (ds->ops->phylink_mac_select_pcs)
- pcs = ds->ops->phylink_mac_select_pcs(ds, dp->index, interface);
-
- return pcs;
+ return ERR_PTR(-EOPNOTSUPP);
}
static void dsa_port_phylink_mac_config(struct phylink_config *config,
unsigned int mode,
const struct phylink_link_state *state)
{
- struct dsa_port *dp = dsa_phylink_to_port(config);
- struct dsa_switch *ds = dp->ds;
-
- if (!ds->ops->phylink_mac_config)
- return;
-
- ds->ops->phylink_mac_config(ds, dp->index, mode, state);
}
static void dsa_port_phylink_mac_link_down(struct phylink_config *config,
unsigned int mode,
phy_interface_t interface)
{
- struct dsa_port *dp = dsa_phylink_to_port(config);
- struct dsa_switch *ds = dp->ds;
-
- if (!ds->ops->phylink_mac_link_down)
- return;
-
- ds->ops->phylink_mac_link_down(ds, dp->index, mode, interface);
}
static void dsa_port_phylink_mac_link_up(struct phylink_config *config,
@@ -1622,14 +1601,6 @@ static void dsa_port_phylink_mac_link_up(struct phylink_config *config,
int speed, int duplex,
bool tx_pause, bool rx_pause)
{
- struct dsa_port *dp = dsa_phylink_to_port(config);
- struct dsa_switch *ds = dp->ds;
-
- if (!ds->ops->phylink_mac_link_up)
- return;
-
- ds->ops->phylink_mac_link_up(ds, dp->index, mode, interface, phydev,
- speed, duplex, tx_pause, rx_pause);
}
static const struct phylink_mac_ops dsa_port_phylink_mac_ops = {
@@ -1871,9 +1842,6 @@ static void dsa_shared_port_link_down(struct dsa_port *dp)
if (ds->phylink_mac_ops && ds->phylink_mac_ops->mac_link_down)
ds->phylink_mac_ops->mac_link_down(&dp->pl_config, MLO_AN_FIXED,
PHY_INTERFACE_MODE_NA);
- else if (ds->ops->phylink_mac_link_down)
- ds->ops->phylink_mac_link_down(ds, dp->index, MLO_AN_FIXED,
- PHY_INTERFACE_MODE_NA);
}
int dsa_shared_port_link_register_of(struct dsa_port *dp)
--
2.30.2
next reply other threads:[~2024-10-03 11:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-03 11:52 Russell King (Oracle) [this message]
2024-10-03 14:51 ` [PATCH net-next v2] net: dsa: remove obsolete phylink dsa_switch operations Vladimir Oltean
2024-10-03 15:28 ` Russell King (Oracle)
2024-10-03 22:28 ` Vladimir Oltean
2024-10-07 23:40 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1swKNV-0060oN-1b@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).