From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
netdev@vger.kernel.org
Subject: [PATCH net-next 3/4] net: phy: remove genphy_c45_eee_is_active()'s is_enabled arg
Date: Thu, 05 Dec 2024 10:42:10 +0000 [thread overview]
Message-ID: <E1tJ9JC-006LIt-Ne@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Z1GDZlFyF2fsFa3S@shell.armlinux.org.uk>
All callers to genphy_c45_eee_is_active() now pass NULL as the
is_enabled argument, which means we never use the value computed
in this function. Remove the argument and clean up this function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phy-c45.c | 12 ++++--------
drivers/net/phy/phy.c | 5 ++---
include/linux/phy.h | 2 +-
3 files changed, 7 insertions(+), 12 deletions(-)
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index d162f78bc68d..0dac08e85304 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -1469,18 +1469,17 @@ EXPORT_SYMBOL_GPL(genphy_c45_plca_get_status);
* @phydev: target phy_device struct
* @adv: variable to store advertised linkmodes
* @lp: variable to store LP advertised linkmodes
- * @is_enabled: variable to store EEE enabled/disabled configuration value
*
* Description: this function will read local and link partner PHY
* advertisements. Compare them return current EEE state.
*/
int genphy_c45_eee_is_active(struct phy_device *phydev, unsigned long *adv,
- unsigned long *lp, bool *is_enabled)
+ unsigned long *lp)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp_adv) = {};
__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp_lp) = {};
__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
- bool eee_enabled, eee_active;
+ bool eee_active;
int ret;
ret = genphy_c45_read_eee_adv(phydev, tmp_adv);
@@ -1491,9 +1490,8 @@ int genphy_c45_eee_is_active(struct phy_device *phydev, unsigned long *adv,
if (ret)
return ret;
- eee_enabled = !linkmode_empty(tmp_adv);
linkmode_and(common, tmp_adv, tmp_lp);
- if (eee_enabled && !linkmode_empty(common))
+ if (!linkmode_empty(tmp_adv) && !linkmode_empty(common))
eee_active = phy_check_valid(phydev->speed, phydev->duplex,
common);
else
@@ -1503,8 +1501,6 @@ int genphy_c45_eee_is_active(struct phy_device *phydev, unsigned long *adv,
linkmode_copy(adv, tmp_adv);
if (lp)
linkmode_copy(lp, tmp_lp);
- if (is_enabled)
- *is_enabled = eee_enabled;
return eee_active;
}
@@ -1524,7 +1520,7 @@ int genphy_c45_ethtool_get_eee(struct phy_device *phydev,
int ret;
ret = genphy_c45_eee_is_active(phydev, data->advertised,
- data->lp_advertised, NULL);
+ data->lp_advertised);
if (ret < 0)
return ret;
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 0c228aa18019..4cf344254237 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -988,8 +988,7 @@ static int phy_check_link_status(struct phy_device *phydev)
if (phydev->link && phydev->state != PHY_RUNNING) {
phy_check_downshift(phydev);
phydev->state = PHY_RUNNING;
- err = genphy_c45_eee_is_active(phydev,
- NULL, NULL, NULL);
+ err = genphy_c45_eee_is_active(phydev, NULL, NULL);
phydev->eee_active = err > 0;
phydev->enable_tx_lpi = phydev->eee_cfg.tx_lpi_enabled &&
phydev->eee_active;
@@ -1658,7 +1657,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
if (!phydev->drv)
return -EIO;
- ret = genphy_c45_eee_is_active(phydev, NULL, NULL, NULL);
+ ret = genphy_c45_eee_is_active(phydev, NULL, NULL);
if (ret < 0)
return ret;
if (!ret)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 61a1bc81f597..bb157136351e 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1991,7 +1991,7 @@ int genphy_c45_plca_set_cfg(struct phy_device *phydev,
int genphy_c45_plca_get_status(struct phy_device *phydev,
struct phy_plca_status *plca_st);
int genphy_c45_eee_is_active(struct phy_device *phydev, unsigned long *adv,
- unsigned long *lp, bool *is_enabled);
+ unsigned long *lp);
int genphy_c45_ethtool_get_eee(struct phy_device *phydev,
struct ethtool_keee *data);
int genphy_c45_ethtool_set_eee(struct phy_device *phydev,
--
2.30.2
next prev parent reply other threads:[~2024-12-05 10:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-05 10:41 [PATCH net-next 0/4] net: phylib EEE cleanups Russell King (Oracle)
2024-12-05 10:42 ` [PATCH net-next 1/4] net: phy: marvell: use phydev->eee_cfg.eee_enabled Russell King (Oracle)
2024-12-05 11:43 ` Russell King (Oracle)
2024-12-05 10:42 ` [PATCH net-next 2/4] net: phy: avoid genphy_c45_ethtool_get_eee() setting eee_enabled Russell King (Oracle)
2024-12-05 11:43 ` Russell King (Oracle)
2024-12-05 10:42 ` Russell King (Oracle) [this message]
2024-12-05 11:44 ` [PATCH net-next 3/4] net: phy: remove genphy_c45_eee_is_active()'s is_enabled arg Russell King (Oracle)
2024-12-05 10:42 ` [PATCH net-next 4/4] net: phy: update phy_ethtool_get_eee() documentation Russell King (Oracle)
2024-12-05 14:53 ` Andrew Lunn
2024-12-07 2:00 ` [PATCH net-next 0/4] net: phylib EEE cleanups patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1tJ9JC-006LIt-Ne@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).