[PATCH RFC net-next 1/7] net: dsa: ksz: remove setting of tx_lpi parameters

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

dsa_user_get_eee() calls the DSA switch get_mac_eee() method followed
by phylink_ethtool_get_eee(), which goes on to call
phy_ethtool_get_eee(). This overwrites all members of the passed
ethtool_keee, which means anything written by the DSA switch
get_mac_eee() method will discarded.

Remove setting any members in ksz_get_mac_eee().

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/dsa/microchip/ksz_common.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 94f9aa983ff6..9a48b4438a6d 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -3480,14 +3480,6 @@ static bool ksz_support_eee(struct dsa_switch *ds, int port)
 static int ksz_get_mac_eee(struct dsa_switch *ds, int port,
 			   struct ethtool_keee *e)
 {
-	/* There is no documented control of Tx LPI configuration. */
-	e->tx_lpi_enabled = true;
-
-	/* There is no documented control of Tx LPI timer. According to tests
-	 * Tx LPI timer seems to be set by default to minimal value.
-	 */
-	e->tx_lpi_timer = 0;
-
 	return 0;
 }
 
-- 
2.30.2