[PATCH net-next v3 13/18] net: stmmac: move priv->eee_active into stmmac_eee_init()

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

Since all call sites of stmmac_eee_init() assign priv->eee_active
immediately before, pass this state into stmmac_eee_init() and
assign priv->eee_active within this function.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b7e0026c271b..7c1dbc5fa84b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -457,13 +457,16 @@ static void stmmac_eee_ctrl_timer(struct timer_list *t)
 /**
  * stmmac_eee_init - init EEE
  * @priv: driver private structure
+ * @active: indicates whether EEE should be enabled.
  * Description:
  *  if the GMAC supports the EEE (from the HW cap reg) and the phy device
  *  can also manage EEE, this function enable the LPI state and start related
  *  timer.
  */
-static void stmmac_eee_init(struct stmmac_priv *priv)
+static void stmmac_eee_init(struct stmmac_priv *priv, bool active)
 {
+	priv->eee_active = active;
+
 	/* Check if MAC core supports the EEE feature. */
 	if (!priv->dma_cap.eee) {
 		priv->eee_enabled = false;
@@ -970,8 +973,7 @@ static void stmmac_mac_link_down(struct phylink_config *config,
 	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
 
 	stmmac_mac_set(priv, priv->ioaddr, false);
-	priv->eee_active = false;
-	stmmac_eee_init(priv);
+	stmmac_eee_init(priv, false);
 	stmmac_set_eee_pls(priv, priv->hw, false);
 
 	if (stmmac_fpe_supported(priv))
@@ -1083,8 +1085,7 @@ static void stmmac_mac_link_up(struct phylink_config *config,
 		phy_eee_rx_clock_stop(phy, !(priv->plat->flags &
 					     STMMAC_FLAG_RX_CLK_RUNS_IN_LPI));
 		priv->tx_lpi_timer = phy->eee_cfg.tx_lpi_timer;
-		priv->eee_active = phy->enable_tx_lpi;
-		stmmac_eee_init(priv);
+		stmmac_eee_init(priv, phy->enable_tx_lpi);
 		stmmac_set_eee_pls(priv, priv->hw, true);
 	}
 
-- 
2.30.2