[PATCH net-next v3 15/18] net: stmmac: move setup of eee_ctrl_timer to stmmac_dvr_probe()

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

Move the initialisation of the EEE software timer to the probe function
as it is unnecessary to do this each time we enable software LPI.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 7c1dbc5fa84b..b003f462006d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -494,7 +494,6 @@ static void stmmac_eee_init(struct stmmac_priv *priv, bool active)
 	}
 
 	if (priv->eee_active && !priv->eee_enabled) {
-		timer_setup(&priv->eee_ctrl_timer, stmmac_eee_ctrl_timer, 0);
 		stmmac_set_eee_timer(priv, priv->hw, STMMAC_DEFAULT_LIT_LS,
 				     STMMAC_DEFAULT_TWT_LS);
 		if (priv->hw->xpcs)
@@ -7405,6 +7404,8 @@ int stmmac_dvr_probe(struct device *device,
 
 	INIT_WORK(&priv->service_task, stmmac_service_task);
 
+	timer_setup(&priv->eee_ctrl_timer, stmmac_eee_ctrl_timer, 0);
+
 	/* Override with kernel parameters if supplied XXX CRS XXX
 	 * this needs to have multiple instances
 	 */
-- 
2.30.2