From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Vladimir Oltean <olteanv@gmail.com>,
Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [PATCH RFC net-next 18/22] net: xpcs: convert to phylink managed EEE
Date: Tue, 28 Jan 2025 15:48:17 +0000 [thread overview]
Message-ID: <E1tcnp3-0037Ho-0d@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Z5j7yCYSsQ7beznD@shell.armlinux.org.uk>
Convert XPCS to use the new pcs_disable_eee() and pcs_enable_eee()
methods. Since stmmac is the only user of xpcs_config_eee(), we can
make this a no-op along with this change.
Questions:
1. Do we actually need this level of control at the PCS - or would it
be sufficient to configure it once during initialisation?
2. Do we need to clear the mult_fact field when disabling EEE?
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/pcs/pcs-xpcs.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 91ce4b13df32..1f312b5589a3 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -602,7 +602,8 @@ static void xpcs_get_interfaces(struct dw_xpcs *xpcs, unsigned long *interfaces)
__set_bit(compat->interface, interfaces);
}
-int xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns, int enable)
+static int __xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns,
+ int enable)
{
u16 mask, val;
int ret;
@@ -630,6 +631,11 @@ int xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns, int enable)
DW_VR_MII_EEE_TRN_LPI,
enable ? DW_VR_MII_EEE_TRN_LPI : 0);
}
+
+int xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns, int enable)
+{
+ return 0;
+}
EXPORT_SYMBOL_GPL(xpcs_config_eee);
static void xpcs_pre_config(struct phylink_pcs *pcs, phy_interface_t interface)
@@ -1193,6 +1199,20 @@ static void xpcs_an_restart(struct phylink_pcs *pcs)
BMCR_ANRESTART);
}
+static void xpcs_disable_eee(struct phylink_pcs *pcs)
+{
+ struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs);
+
+ __xpcs_config_eee(xpcs, 0, false);
+}
+
+static void xpcs_enable_eee(struct phylink_pcs *pcs)
+{
+ struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs);
+
+ __xpcs_config_eee(xpcs, xpcs->eee_mult_fact, true);
+}
+
/**
* xpcs_config_eee_mult_fact() - set the EEE clock multiplying factor
* @xpcs: pointer to a &struct dw_xpcs instance
@@ -1355,6 +1375,8 @@ static const struct phylink_pcs_ops xpcs_phylink_ops = {
.pcs_get_state = xpcs_get_state,
.pcs_an_restart = xpcs_an_restart,
.pcs_link_up = xpcs_link_up,
+ .pcs_disable_eee = xpcs_disable_eee,
+ .pcs_enable_eee = xpcs_enable_eee,
};
static int xpcs_identify(struct dw_xpcs *xpcs)
--
2.30.2
next prev parent reply other threads:[~2025-01-28 15:48 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-28 15:46 [PATCH RFC net-next 00/22] net: stmmac/xpcs: further EEE work Russell King (Oracle)
2025-01-28 15:46 ` [PATCH RFC net-next 01/22] net: stmmac: delete software timer before disabling LPI Russell King (Oracle)
2025-01-28 15:46 ` [PATCH RFC net-next 02/22] net: stmmac: ensure LPI is disabled when disabling EEE Russell King (Oracle)
2025-01-28 15:47 ` [PATCH RFC net-next 03/22] net: stmmac: dwmac4: ensure LPIATE is cleared Russell King (Oracle)
2025-01-28 15:47 ` [PATCH RFC net-next 04/22] net: stmmac: split stmmac_init_eee() and move to phylink methods Russell King (Oracle)
2025-01-28 15:47 ` [PATCH RFC net-next 05/22] net: stmmac: remove priv->dma_cap.eee test in tx_lpi methods Russell King (Oracle)
2025-01-28 15:47 ` [PATCH RFC net-next 06/22] net: stmmac: remove unnecessary priv->eee_active tests Russell King (Oracle)
2025-01-28 15:47 ` [PATCH RFC net-next 07/22] net: stmmac: remove unnecessary priv->eee_enabled tests Russell King (Oracle)
2025-01-28 15:47 ` [PATCH RFC net-next 08/22] net: stmmac: clear priv->tx_path_in_lpi_mode when disabling LPI Russell King (Oracle)
2025-01-28 15:47 ` [PATCH RFC net-next 09/22] net: stmmac: remove unnecessary LPI disable when enabling LPI Russell King (Oracle)
2025-01-28 15:47 ` [PATCH RFC net-next 10/22] net: stmmac: use common LPI_CTRL_STATUS bit definitions Russell King (Oracle)
2025-01-28 15:47 ` [PATCH RFC net-next 11/22] net: stmmac: add new MAC method set_lpi_mode() Russell King (Oracle)
2025-01-28 15:47 ` [PATCH RFC net-next 12/22] net: stmmac: dwmac4: clear LPI_CTRL_STATUS_LPITCSE too Russell King (Oracle)
2025-01-28 15:47 ` [PATCH RFC net-next 13/22] net: stmmac: use stmmac_set_lpi_mode() Russell King (Oracle)
2025-01-28 15:47 ` [PATCH RFC net-next 14/22] net: stmmac: remove old EEE methods Russell King (Oracle)
2025-01-28 15:48 ` [PATCH RFC net-next 15/22] net: phylink: add support for notifying PCS about EEE Russell King (Oracle)
2025-01-28 15:48 ` [PATCH RFC net-next 16/22] net: xpcs: add function to configure EEE clock multiplying factor Russell King (Oracle)
2025-01-28 15:48 ` [PATCH RFC net-next 17/22] net: stmmac: call xpcs_config_eee_mult_fact() Russell King (Oracle)
2025-01-28 15:48 ` Russell King (Oracle) [this message]
2025-01-28 15:48 ` [PATCH RFC net-next 19/22] net: stmmac: remove calls to xpcs_config_eee() Russell King (Oracle)
2025-01-28 15:48 ` [PATCH RFC net-next 20/22] net: xpcs: remove xpcs_config_eee() from global scope Russell King (Oracle)
2025-01-28 15:48 ` [PATCH RFC net-next 21/22] net: xpcs: clean up xpcs_config_eee() Russell King (Oracle)
2025-01-28 15:48 ` [PATCH RFC net-next 22/22] net: xpcs: group EEE code together Russell King (Oracle)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1tcnp3-0037Ho-0d@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=jiawenwu@trustnetic.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).