[PATCH net-next 08/14] net: stmmac: clear priv->tx_path_in_lpi_mode when disabling LPI

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

As other code paths do, clear priv->tx_path_in_lpi_mode when disabling
LPI. This is done after the software timer has been deleted and
hardware LPI has been disabled.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 695e75de41b3..3cb5645673cb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1052,6 +1052,8 @@ static void stmmac_mac_disable_tx_lpi(struct phylink_config *config)
 	priv->eee_sw_timer_en = false;
 	del_timer_sync(&priv->eee_ctrl_timer);
 	stmmac_reset_eee_mode(priv, priv->hw);
+	priv->tx_path_in_lpi_mode = false;
+
 	stmmac_set_eee_timer(priv, priv->hw, 0, STMMAC_DEFAULT_TWT_LS);
 	if (priv->hw->xpcs)
 		xpcs_config_eee(priv->hw->xpcs, priv->plat->mult_fact_100ns,
-- 
2.30.2