[PATCH net-next v2 3/3] net: dsa: mt7530: convert to phylink managed EEE

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

Convert mt7530 to use phylink managed EEE. When enabling EEE, we set
both PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 irrespective of the speed,
and clear them both when disabling.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/dsa/mt7530.c | 68 +++++++++++++++++++++++++++-------------
 1 file changed, 47 insertions(+), 21 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 1c83af805209..9fd44e55d519 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2957,28 +2957,61 @@ static void mt753x_phylink_mac_link_up(struct phylink_config *config,
 			mcr |= PMCR_FORCE_RX_FC_EN;
 	}
 
-	if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
-		switch (speed) {
-		case SPEED_1000:
-		case SPEED_2500:
-			mcr |= PMCR_FORCE_EEE1G;
-			break;
-		case SPEED_100:
-			mcr |= PMCR_FORCE_EEE100;
-			break;
-		}
-	}
-
 	mt7530_set(priv, MT753X_PMCR_P(dp->index), mcr);
 }
 
+static void mt753x_phylink_mac_disable_tx_lpi(struct phylink_config *config)
+{
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct mt7530_priv *priv = dp->ds->priv;
+
+	mt7530_clear(priv, MT753X_PMCR_P(dp->index),
+		     PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100);
+}
+
+static int mt753x_phylink_mac_enable_tx_lpi(struct phylink_config *config,
+					    u32 timer, bool tx_clock_stop)
+{
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct mt7530_priv *priv = dp->ds->priv;
+	u32 val;
+
+	/* If the timer is zero, then set LPI_MODE_EN, which allows the
+	 * system to enter LPI mode immediately rather than waiting for
+	 * the LPI threshold.
+	 */
+	if (!timer)
+		val = LPI_MODE_EN;
+	else if (FIELD_FIT(LPI_THRESH_MASK, timer))
+		val = FIELD_PREP(LPI_THRESH_MASK, timer);
+	else
+		val = LPI_THRESH_MASK;
+
+	mt7530_rmw(priv, MT753X_PMEEECR_P(dp->index),
+		   LPI_THRESH_MASK | LPI_MODE_EN, val);
+
+	mt7530_set(priv, MT753X_PMCR_P(dp->index),
+		   PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100);
+
+	return 0;
+}
+
 static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
 				    struct phylink_config *config)
 {
 	struct mt7530_priv *priv = ds->priv;
+	u32 eeecr;
 
 	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE;
 
+	config->lpi_capabilities = MAC_100FD | MAC_1000FD | MAC_2500FD;
+
+	eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port));
+	/* tx_lpi_timer should be in microseconds. The time units for
+	 * LPI threshold are unspecified.
+	 */
+	config->lpi_timer_default = FIELD_GET(LPI_THRESH_MASK, eeecr);
+
 	priv->info->mac_port_get_caps(ds, port, config);
 }
 
@@ -3088,18 +3121,9 @@ mt753x_setup(struct dsa_switch *ds)
 static int mt753x_set_mac_eee(struct dsa_switch *ds, int port,
 			      struct ethtool_keee *e)
 {
-	struct mt7530_priv *priv = ds->priv;
-	u32 set, mask = LPI_THRESH_MASK | LPI_MODE_EN;
-
 	if (e->tx_lpi_timer > 0xFFF)
 		return -EINVAL;
 
-	set = LPI_THRESH_SET(e->tx_lpi_timer);
-	if (!e->tx_lpi_enabled)
-		/* Force LPI Mode without a delay */
-		set |= LPI_MODE_EN;
-	mt7530_rmw(priv, MT753X_PMEEECR_P(port), mask, set);
-
 	return 0;
 }
 
@@ -3238,6 +3262,8 @@ static const struct phylink_mac_ops mt753x_phylink_mac_ops = {
 	.mac_config	= mt753x_phylink_mac_config,
 	.mac_link_down	= mt753x_phylink_mac_link_down,
 	.mac_link_up	= mt753x_phylink_mac_link_up,
+	.mac_disable_tx_lpi = mt753x_phylink_mac_disable_tx_lpi,
+	.mac_enable_tx_lpi = mt753x_phylink_mac_enable_tx_lpi,
 };
 
 const struct mt753x_info mt753x_table[] = {
-- 
2.30.2