From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>
Subject: [PATCH net-next 1/8] net: phylink: add support for notifying PCS about EEE
Date: Mon, 10 Feb 2025 10:53:39 +0000 [thread overview]
Message-ID: <E1thRQ3-003w6u-RH@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Z6naiPpxfxGr1Ic6@shell.armlinux.org.uk>
There are hooks in the stmmac driver into XPCS to control the EEE
settings when LPI is configured at the MAC. This bypasses the layering.
To allow this to be removed from the stmmac driver, add two new
methods for PCS to inform them when the LPI/EEE enablement state
changes at the MAC.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phylink.c | 25 ++++++++++++++++++++++---
include/linux/phylink.h | 22 ++++++++++++++++++++++
2 files changed, 44 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 214b62fba991..840af19488d8 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1073,6 +1073,18 @@ static void phylink_pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode,
pcs->ops->pcs_link_up(pcs, neg_mode, interface, speed, duplex);
}
+static void phylink_pcs_disable_eee(struct phylink_pcs *pcs)
+{
+ if (pcs && pcs->ops->pcs_disable_eee)
+ pcs->ops->pcs_disable_eee(pcs);
+}
+
+static void phylink_pcs_enable_eee(struct phylink_pcs *pcs)
+{
+ if (pcs && pcs->ops->pcs_enable_eee)
+ pcs->ops->pcs_enable_eee(pcs);
+}
+
/* Query inband for a specific interface mode, asking the MAC for the
* PCS which will be used to handle the interface mode.
*/
@@ -1601,6 +1613,8 @@ static void phylink_deactivate_lpi(struct phylink *pl)
phylink_dbg(pl, "disabling LPI\n");
pl->mac_ops->mac_disable_tx_lpi(pl->config);
+
+ phylink_pcs_disable_eee(pl->pcs);
}
}
@@ -1617,13 +1631,18 @@ static void phylink_activate_lpi(struct phylink *pl)
phylink_dbg(pl, "LPI timer %uus, tx clock stop %u\n",
pl->mac_tx_lpi_timer, pl->mac_tx_clk_stop);
+ phylink_pcs_enable_eee(pl->pcs);
+
err = pl->mac_ops->mac_enable_tx_lpi(pl->config, pl->mac_tx_lpi_timer,
pl->mac_tx_clk_stop);
- if (!err)
- pl->mac_enable_tx_lpi = true;
- else
+ if (err) {
+ phylink_pcs_disable_eee(pl->pcs);
phylink_err(pl, "%ps() failed: %pe\n",
pl->mac_ops->mac_enable_tx_lpi, ERR_PTR(err));
+ return;
+ }
+
+ pl->mac_enable_tx_lpi = true;
}
static void phylink_link_up(struct phylink *pl,
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 898b00451bbf..a692d638568f 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -477,6 +477,10 @@ struct phylink_pcs {
* @pcs_an_restart: restart 802.3z BaseX autonegotiation.
* @pcs_link_up: program the PCS for the resolved link configuration
* (where necessary).
+ * @pcs_disable_eee: optional notification to PCS that EEE has been disabled
+ * at the MAC.
+ * @pcs_enable_eee: optional notification to PCS that EEE will be enabled at
+ * the MAC.
* @pcs_pre_init: configure PCS components necessary for MAC hardware
* initialization e.g. RX clock for stmmac.
*/
@@ -500,6 +504,8 @@ struct phylink_pcs_ops {
void (*pcs_an_restart)(struct phylink_pcs *pcs);
void (*pcs_link_up)(struct phylink_pcs *pcs, unsigned int neg_mode,
phy_interface_t interface, int speed, int duplex);
+ void (*pcs_disable_eee)(struct phylink_pcs *pcs);
+ void (*pcs_enable_eee)(struct phylink_pcs *pcs);
int (*pcs_pre_init)(struct phylink_pcs *pcs);
};
@@ -625,6 +631,22 @@ void pcs_an_restart(struct phylink_pcs *pcs);
void pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode,
phy_interface_t interface, int speed, int duplex);
+/**
+ * pcs_disable_eee() - Disable EEE at the PCS
+ * @pcs: a pointer to a &struct phylink_pcs
+ *
+ * Optional method informing the PCS that EEE has been disabled at the MAC.
+ */
+void pcs_disable_eee(struct phylink_pcs *pcs);
+
+/**
+ * pcs_enable_eee() - Enable EEE at the PCS
+ * @pcs: a pointer to a &struct phylink_pcs
+ *
+ * Optional method informing the PCS that EEE is about to be enabled at the MAC.
+ */
+void pcs_enable_eee(struct phylink_pcs *pcs);
+
/**
* pcs_pre_init() - Configure PCS components necessary for MAC initialization
* @pcs: a pointer to a &struct phylink_pcs.
--
2.30.2
next prev parent reply other threads:[~2025-02-10 10:54 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-10 10:52 [PATCH net-next 0/8] net: phylink,xpcs,stmmac: support PCS EEE configuration Russell King (Oracle)
2025-02-10 10:53 ` Russell King (Oracle) [this message]
2025-02-10 10:53 ` [PATCH net-next 2/8] net: xpcs: add function to configure EEE clock multiplying factor Russell King (Oracle)
2025-02-10 10:53 ` [PATCH net-next 3/8] net: stmmac: call xpcs_config_eee_mult_fact() Russell King (Oracle)
2025-02-10 10:53 ` [PATCH net-next 4/8] net: xpcs: convert to phylink managed EEE Russell King (Oracle)
2025-02-10 10:54 ` [PATCH net-next 5/8] net: stmmac: remove calls to xpcs_config_eee() Russell King (Oracle)
2025-02-10 10:54 ` [PATCH net-next 6/8] net: xpcs: remove xpcs_config_eee() from global scope Russell King (Oracle)
2025-02-10 10:54 ` [PATCH net-next 7/8] net: xpcs: clean up xpcs_config_eee() Russell King (Oracle)
2025-02-10 10:54 ` [PATCH net-next 8/8] net: xpcs: group EEE code together Russell King (Oracle)
2025-02-14 21:50 ` [PATCH net-next 0/8] net: phylink,xpcs,stmmac: support PCS EEE configuration patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1thRQ3-003w6u-RH@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).