[PATCH RFC net-next 7/7] net: stmmac: imx: use generic stmmac_set_clk_tx_rate()

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

Convert non-i.MX93 users to use the generic stmmac_set_clk_tx_rate() to
configure the MAC transmit clock rate.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
index 610204b51e3f..927ce8d97f78 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
@@ -358,7 +358,6 @@ static int imx_dwmac_probe(struct platform_device *pdev)
 	plat_dat->init = imx_dwmac_init;
 	plat_dat->exit = imx_dwmac_exit;
 	plat_dat->clks_config = imx_dwmac_clks_config;
-	plat_dat->fix_mac_speed = imx_dwmac_fix_speed;
 	plat_dat->bsp_priv = dwmac;
 	dwmac->plat_dat = plat_dat;
 	dwmac->base_addr = stmmac_res.addr;
@@ -371,8 +370,12 @@ static int imx_dwmac_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_dwmac_init;
 
+	plat_dat->clk_tx_i = dwmac->clk_tx;
 	if (dwmac->ops->fix_mac_speed)
 		plat_dat->fix_mac_speed = dwmac->ops->fix_mac_speed;
+	else
+		plat_dat->set_clk_tx_rate = stmmac_set_clk_tx_rate;
+
 	dwmac->plat_dat->fix_soc_reset = dwmac->ops->fix_soc_reset;
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
-- 
2.30.2