netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Jon Hunter <jonathanh@nvidia.com>,
	Thierry Reding <treding@nvidia.com>,
	"Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Andrew Lunn <andrew@lunn.ch>, Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>
Subject: [PATCH RFC net-next 2/3] net: phylink: add functions to block/unblock rx clock stop
Date: Tue, 04 Mar 2025 10:53:26 +0000	[thread overview]
Message-ID: <E1tpPtu-005Soa-Ac@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Z8bbnSG67rqTj0pH@shell.armlinux.org.uk>

Some MACs require the PHY receive clock to be running to complete setup
actions. This may fail if the PHY has negotiated EEE, the MAC supports
receive clock stop, and the link has entered LPI state. Provide a pair
of APIs that MAC drivers can use to temporarily block the PHY disabling
the receive clock.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phylink.c | 62 +++++++++++++++++++++++++++++++--------
 include/linux/phylink.h   |  3 ++
 2 files changed, 53 insertions(+), 12 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 0aae0bb2a254..9a62808cf935 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -88,6 +88,7 @@ struct phylink {
 	bool mac_enable_tx_lpi;
 	bool mac_tx_clk_stop;
 	u32 mac_tx_lpi_timer;
+	u8 mac_rx_clk_stop_blocked;
 
 	struct sfp_bus *sfp_bus;
 	bool sfp_may_have_phy;
@@ -2592,6 +2593,55 @@ void phylink_stop(struct phylink *pl)
 }
 EXPORT_SYMBOL_GPL(phylink_stop);
 
+
+void phylink_rx_clk_stop_block(struct phylink *pl)
+{
+	ASSERT_RTNL();
+
+	if (pl->mac_rx_clk_stop_blocked == U8_MAX) {
+		phylink_warn(pl, "%s called too many times - ignoring\n",
+			     __func__);
+		dump_stack();
+		return;
+	}
+
+	/* Disable PHY receive clock stop if this is the first time this
+	 * function has been called and clock-stop was previously enabled.
+	 */
+	if (pl->mac_rx_clk_stop_blocked++ == 0 &&
+	    pl->mac_supports_eee_ops && pl->phydev)
+	    pl->config->eee_rx_clk_stop_enable)
+		phy_eee_rx_clock_stop(pl->phydev, false);
+}
+
+/**
+ * phylink_rx_clk_stop_unblock() - unblock PHY ability to stop receive clock
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * All calls to phylink_rx_clk_stop_block() must be balanced with a
+ * corresponding call to phylink_rx_clk_stop_unblock() to restore the PHYs
+ * clock stop ability.
+ */
+void phylink_rx_clk_stop_unblock(struct phylink *pl)
+{
+	ASSERT_RTNL();
+
+	if (pl->mac_rx_clk_stop_blocked == 0) {
+		phylink_warn(pl, "%s called too many times - ignoring\n",
+			     __func__);
+		dump_stack();
+		return;
+	}
+
+	/* Re-enable PHY receive clock stop if the number of unblocks matches
+	 * the number of calls to the block function above.
+	 */
+	if (--pl->mac_rx_clk_stop_blocked == 0 &&
+	    pl->mac_supports_eee_ops && pl->phydev &&
+	    pl->config->eee_rx_clk_stop_enable)
+		phy_eee_rx_clock_stop(pl->phydev, true);
+}
+
 /**
  * phylink_suspend() - handle a network device suspend event
  * @pl: a pointer to a &struct phylink returned from phylink_create()
@@ -2649,18 +2699,6 @@ void phylink_resume(struct phylink *pl)
 
 	ASSERT_RTNL();
 
-	if (pl->mac_supports_eee_ops && pl->phydev) {
-		/* Explicitly configure whether the PHY is allowed to stop its
-		 * receive clock on resume to ensure that it is correctly
-		 * configured.
-		 */
-		ret = phy_eee_rx_clock_stop(pl->phydev,
-					    pl->config->eee_rx_clk_stop_enable);
-		if (ret == -EOPNOTSUPP)
-			phylink_warn(pl, "failed to set rx clock stop: %pe\n",
-				     ERR_PTR(ret));
-	}
-
 	if (test_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state)) {
 		/* Wake-on-Lan enabled, MAC handling */
 
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 08df65f6867a..249c437d6b7b 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -698,6 +698,9 @@ int phylink_pcs_pre_init(struct phylink *pl, struct phylink_pcs *pcs);
 void phylink_start(struct phylink *);
 void phylink_stop(struct phylink *);
 
+void phylink_rx_clk_stop_block(struct phylink *);
+void phylink_rx_clk_stop_unblock(struct phylink *);
+
 void phylink_suspend(struct phylink *pl, bool mac_wol);
 void phylink_resume(struct phylink *pl);
 
-- 
2.30.2


  parent reply	other threads:[~2025-03-04 10:53 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-04 10:53 [PATCH RFC net-next 0/3] net: stmmac: approach 2 to solve EEE LPI reset issues Russell King (Oracle)
2025-03-04 10:53 ` [PATCH RFC net-next 1/3] net: phylink: add config of PHY receive clock-stop in phylink_resume() Russell King (Oracle)
2025-03-04 10:53 ` Russell King (Oracle) [this message]
2025-03-04 10:53 ` [PATCH RFC net-next 3/3] net: stmmac: block PHY rx clock-stop over reset Russell King (Oracle)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1tpPtu-005Soa-Ac@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=prabhakar.csengg@gmail.com \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).