[PATCH net-next] net: phy: realtek: disable PHY-mode EEE

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

Realtek RTL8211F has a "PHY-mode" EEE support which interferes with an
IEEE 802.3 compliant implementation. This mode defaults to enabled, and
results in the MAC receive path not seeing the link transition to LPI
state.

Fix this by disabling PHY-mode EEE.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
This patch isn't the best approach...
---
 drivers/net/phy/realtek/realtek_main.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c
index 7a0b19d66aca..893c82479671 100644
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c
@@ -33,6 +33,9 @@
 
 #define RTL8211F_PHYCR1				0x18
 #define RTL8211F_PHYCR2				0x19
+#define RTL8211F_CLKOUT_EN			BIT(0)
+#define RTL8211F_PHYCR2_PHY_EEE_ENABLE		BIT(5)
+
 #define RTL8211F_INSR				0x1d
 
 #define RTL8211F_LEDCR				0x10
@@ -55,8 +58,6 @@
 #define RTL8211E_TX_DELAY			BIT(12)
 #define RTL8211E_RX_DELAY			BIT(11)
 
-#define RTL8211F_CLKOUT_EN			BIT(0)
-
 #define RTL8201F_ISR				0x1e
 #define RTL8201F_ISR_ANERR			BIT(15)
 #define RTL8201F_ISR_DUPLEX			BIT(13)
@@ -453,6 +454,12 @@ static int rtl8211f_config_init(struct phy_device *phydev)
 			str_enabled_disabled(val_rxdly));
 	}
 
+	/* Disable PHY-mode EEE so LPI is passed to the MAC */
+	ret = phy_modify_paged(phydev, 0xa43, RTL8211F_PHYCR2,
+			       RTL8211F_PHYCR2_PHY_EEE_ENABLE, 0);
+	if (ret)
+		return ret;
+
 	if (priv->has_phycr2) {
 		ret = phy_modify_paged(phydev, 0xa43, RTL8211F_PHYCR2,
 				       RTL8211F_CLKOUT_EN, priv->phycr2);
-- 
2.30.2