[PATCH net-next 1/4] net: stmmac: qcom-ethqos: set serdes speed using serdes_speed

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

ethqos->serdes_speed represents the current speed the serdes was
configured for, which should be the same as ethqos->speed. Since we
wish to remove ethqos->speed to simplify the code, switch to using the
serdes_speed instead.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 0e4da216f942..5d8cd4336a8c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -709,7 +709,7 @@ static int qcom_ethqos_serdes_powerup(struct net_device *ndev, void *priv)
 	if (ret)
 		return ret;
 
-	return phy_set_speed(ethqos->serdes_phy, ethqos->speed);
+	return phy_set_speed(ethqos->serdes_phy, ethqos->serdes_speed);
 }
 
 static void qcom_ethqos_serdes_powerdown(struct net_device *ndev, void *priv)
-- 
2.30.2