[PATCH net-next 5/6] net: stmmac: intel: convert speed_mode_2500() to get_interfaces()

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

TGL platforms support either SGMII or 2500BASE-X, which is determined
by reading a SERDES register.

Thus, plat->phy_interface (and phylink's supported_interfaces) depend
on this. Use the new .get_interfaces() method to set both
plat->phy_interface and the supported_interfaces bitmap.

This removes the only user of the .speed_mode_2500() method.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 30 ++++++++++---------
 .../net/ethernet/stmicro/stmmac/dwmac-intel.h |  1 -
 2 files changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 4b263a3c65a4..9a47015254bb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -284,25 +284,28 @@ static void intel_serdes_powerdown(struct net_device *ndev, void *intel_data)
 	}
 }
 
-static void intel_speed_mode_2500(struct net_device *ndev, void *intel_data)
+static void tgl_get_interfaces(struct stmmac_priv *priv, void *bsp_priv,
+			       unsigned long *interfaces)
 {
-	struct intel_priv_data *intel_priv = intel_data;
-	struct stmmac_priv *priv = netdev_priv(ndev);
-	int serdes_phy_addr = 0;
-	u32 data = 0;
-
-	serdes_phy_addr = intel_priv->mdio_adhoc_addr;
+	struct intel_priv_data *intel_priv = bsp_priv;
+	phy_interface_t interface;
+	int data;
 
 	/* Determine the link speed mode: 2.5Gbps/1Gbps */
-	data = mdiobus_read(priv->mii, serdes_phy_addr,
-			    SERDES_GCR);
+	data = mdiobus_read(priv->mii, intel_priv->mdio_adhoc_addr, SERDES_GCR);
+	if (data < 0)
+		return;
 
-	if (((data & SERDES_LINK_MODE_MASK) >> SERDES_LINK_MODE_SHIFT) ==
-	    SERDES_LINK_MODE_2G5) {
+	if (FIELD_GET(SERDES_LINK_MODE_MASK, data) == SERDES_LINK_MODE_2G5) {
 		dev_info(priv->device, "Link Speed Mode: 2.5Gbps\n");
-		priv->plat->phy_interface = PHY_INTERFACE_MODE_2500BASEX;
 		priv->plat->mdio_bus_data->default_an_inband = false;
+		interface = PHY_INTERFACE_MODE_2500BASEX;
+	} else {
+		interface = PHY_INTERFACE_MODE_SGMII;
 	}
+
+	__set_bit(interface, interfaces);
+	priv->plat->phy_interface = interface;
 }
 
 /* Program PTP Clock Frequency for different variant of
@@ -929,8 +932,7 @@ static int tgl_common_data(struct pci_dev *pdev,
 	plat->rx_queues_to_use = 6;
 	plat->tx_queues_to_use = 4;
 	plat->clk_ptp_rate = 204800000;
-	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
-	plat->speed_mode_2500 = intel_speed_mode_2500;
+	plat->get_interfaces = tgl_get_interfaces;
 
 	plat->safety_feat_cfg->tsoee = 1;
 	plat->safety_feat_cfg->mrxpee = 0;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
index a12f8e65f89f..7511c224b312 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
@@ -21,7 +21,6 @@
 #define SERDES_RATE_MASK	GENMASK(9, 8)
 #define SERDES_PCLK_MASK	GENMASK(14, 12)	/* PCLK rate to PHY */
 #define SERDES_LINK_MODE_MASK	GENMASK(2, 1)
-#define SERDES_LINK_MODE_SHIFT	1
 #define SERDES_PWR_ST_SHIFT	4
 #define SERDES_PWR_ST_P0	0x0
 #define SERDES_PWR_ST_P3	0x3
-- 
2.30.2