[PATCH net-next 1/9] net: stmmac: rk: add get_interfaces() implementation

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

RK platforms support RGMII and/or RMII depending on the SoC. Detect
whether support for a SoC exists by whether the interface specific
set_to functions have been populated, and set the appropriate bits in
phylink's bitmap of interfaces.

This assumes all dwmac interfaces on a SoC have identical support,
but it should be noted that this is not true for RK3528 which only
supports RGMII on GMAC1. However, the existing code structure
permits RGMII to be configured on GMAC0 without complaint, so
preserve this behaviour even though it is incorrect to avoid
functional change.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 700858ff6f7c..8006424ab027 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -1864,6 +1864,18 @@ static void rk_gmac_powerdown(struct rk_priv_data *gmac)
 	gmac_clk_enable(gmac, false);
 }
 
+static void rk_get_interfaces(struct stmmac_priv *priv, void *bsp_priv,
+			      unsigned long *interfaces)
+{
+	struct rk_priv_data *rk = bsp_priv;
+
+	if (rk->ops->set_to_rgmii)
+		phy_interface_set_rgmii(interfaces);
+
+	if (rk->ops->set_to_rmii)
+		__set_bit(PHY_INTERFACE_MODE_RMII, interfaces);
+}
+
 static int rk_set_clk_tx_rate(void *bsp_priv_, struct clk *clk_tx_i,
 			      phy_interface_t interface, int speed)
 {
@@ -1919,6 +1931,7 @@ static int rk_gmac_probe(struct platform_device *pdev)
 		plat_dat->tx_fifo_size = 2048;
 	}
 
+	plat_dat->get_interfaces = rk_get_interfaces;
 	plat_dat->set_clk_tx_rate = rk_set_clk_tx_rate;
 
 	plat_dat->bsp_priv = rk_gmac_setup(pdev, plat_dat, data);
-- 
2.30.2