[PATCH net-next v2 08/11] net: stmmac: ingenic: simplify mac_set_mode() methods

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

x1000, x1600 and x1830 only accept RMII mode. PHY_INTF_SEL_RMII is only
selected with PHY_INTERFACE_MODE_RMII, and PHY_INTF_SEL_RMII has been
validated by the SoC's .valid_phy_intf_sel bitmask. Thus, checking the
interface mode in these functions becomes unnecessary. Remove these.

jz4775 is similar, except for a greater set of PHY_INTF_SEL_x valies.
Also remove the switch statement here.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../ethernet/stmicro/stmmac/dwmac-ingenic.c   | 50 +------------------
 1 file changed, 2 insertions(+), 48 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
index 539513890db1..7b2576fbb1e1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
@@ -75,22 +75,6 @@ static int jz4775_mac_set_mode(struct plat_stmmacenet_data *plat_dat,
 	struct ingenic_mac *mac = plat_dat->bsp_priv;
 	unsigned int val;
 
-	switch (plat_dat->phy_interface) {
-	case PHY_INTERFACE_MODE_MII:
-	case PHY_INTERFACE_MODE_GMII:
-	case PHY_INTERFACE_MODE_RMII:
-	case PHY_INTERFACE_MODE_RGMII:
-	case PHY_INTERFACE_MODE_RGMII_ID:
-	case PHY_INTERFACE_MODE_RGMII_TXID:
-	case PHY_INTERFACE_MODE_RGMII_RXID:
-		break;
-
-	default:
-		dev_err(mac->dev, "Unsupported interface %s\n",
-			phy_modes(plat_dat->phy_interface));
-		return -EINVAL;
-	}
-
 	val = FIELD_PREP(MACPHYC_PHY_INFT_MASK, phy_intf_sel) |
 	      FIELD_PREP(MACPHYC_TXCLK_SEL_MASK, MACPHYC_TXCLK_SEL_INPUT);
 
@@ -103,16 +87,6 @@ static int x1000_mac_set_mode(struct plat_stmmacenet_data *plat_dat,
 {
 	struct ingenic_mac *mac = plat_dat->bsp_priv;
 
-	switch (plat_dat->phy_interface) {
-	case PHY_INTERFACE_MODE_RMII:
-		break;
-
-	default:
-		dev_err(mac->dev, "Unsupported interface %s\n",
-			phy_modes(plat_dat->phy_interface));
-		return -EINVAL;
-	}
-
 	/* Update MAC PHY control register */
 	return regmap_update_bits(mac->regmap, 0, mac->soc_info->mask, 0);
 }
@@ -123,16 +97,6 @@ static int x1600_mac_set_mode(struct plat_stmmacenet_data *plat_dat,
 	struct ingenic_mac *mac = plat_dat->bsp_priv;
 	unsigned int val;
 
-	switch (plat_dat->phy_interface) {
-	case PHY_INTERFACE_MODE_RMII:
-		break;
-
-	default:
-		dev_err(mac->dev, "Unsupported interface %s\n",
-			phy_modes(plat_dat->phy_interface));
-		return -EINVAL;
-	}
-
 	val = FIELD_PREP(MACPHYC_PHY_INFT_MASK, phy_intf_sel);
 
 	/* Update MAC PHY control register */
@@ -145,18 +109,8 @@ static int x1830_mac_set_mode(struct plat_stmmacenet_data *plat_dat,
 	struct ingenic_mac *mac = plat_dat->bsp_priv;
 	unsigned int val;
 
-	switch (plat_dat->phy_interface) {
-	case PHY_INTERFACE_MODE_RMII:
-		val = FIELD_PREP(MACPHYC_MODE_SEL_MASK, MACPHYC_MODE_SEL_RMII);
-		break;
-
-	default:
-		dev_err(mac->dev, "Unsupported interface %s\n",
-			phy_modes(plat_dat->phy_interface));
-		return -EINVAL;
-	}
-
-	val |= FIELD_PREP(MACPHYC_PHY_INFT_MASK, phy_intf_sel);
+	val = FIELD_PREP(MACPHYC_MODE_SEL_MASK, MACPHYC_MODE_SEL_RMII) |
+	      FIELD_PREP(MACPHYC_PHY_INFT_MASK, phy_intf_sel);
 
 	/* Update MAC PHY control register */
 	return regmap_update_bits(mac->regmap, 0, mac->soc_info->mask, val);
-- 
2.47.3