netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
	Vladimir Zapolskiy <vz@mleia.com>
Subject: [PATCH net-next 9/9] net: stmmac: sti: use ->set_phy_intf_sel()
Date: Thu, 06 Nov 2025 11:23:52 +0000	[thread overview]
Message-ID: <E1vGy5o-0000000DhQn-34JE@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <aQyEs4DAZRWpAz32@shell.armlinux.org.uk>

Rather than placing the phy_intf_sel() setup in the ->init() method,
move it to the new ->set_phy_intf_sel() method.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/dwmac-sti.c   | 25 +++++++------------
 1 file changed, 9 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
index 593e154b5957..b0509ab6b31c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
@@ -146,17 +146,18 @@ static void stih4xx_fix_retime_src(void *priv, int spd, unsigned int mode)
 			   stih4xx_tx_retime_val[src]);
 }
 
-static int sti_dwmac_set_mode(struct sti_dwmac *dwmac)
+static int sti_set_phy_intf_sel(void *bsp_priv, u8 phy_intf_sel)
 {
-	struct regmap *regmap = dwmac->regmap;
-	u32 reg = dwmac->ctrl_reg;
-	int phy_intf_sel;
-	u32 val;
+	struct sti_dwmac *dwmac = bsp_priv;
+	struct regmap *regmap;
+	u32 reg, val;
+
+	regmap = dwmac->regmap;
+	reg = dwmac->ctrl_reg;
 
 	if (dwmac->gmac_en)
 		regmap_update_bits(regmap, reg, EN_MASK, EN);
 
-	phy_intf_sel = stmmac_get_phy_intf_sel(dwmac->interface);
 	if (phy_intf_sel != PHY_INTF_SEL_GMII_MII &&
 	    phy_intf_sel != PHY_INTF_SEL_RGMII &&
 	    phy_intf_sel != PHY_INTF_SEL_SGMII &&
@@ -231,17 +232,8 @@ static int sti_dwmac_parse_data(struct sti_dwmac *dwmac,
 static int sti_dwmac_init(struct platform_device *pdev, void *bsp_priv)
 {
 	struct sti_dwmac *dwmac = bsp_priv;
-	int ret;
-
-	ret = clk_prepare_enable(dwmac->clk);
-	if (ret)
-		return ret;
-
-	ret = sti_dwmac_set_mode(dwmac);
-	if (ret)
-		clk_disable_unprepare(dwmac->clk);
 
-	return ret;
+	return clk_prepare_enable(dwmac->clk);
 }
 
 static void sti_dwmac_exit(struct platform_device *pdev, void *bsp_priv)
@@ -286,6 +278,7 @@ static int sti_dwmac_probe(struct platform_device *pdev)
 	dwmac->fix_retime_src = data->fix_retime_src;
 
 	plat_dat->bsp_priv = dwmac;
+	plat_dat->set_phy_intf_sel = sti_set_phy_intf_sel;
 	plat_dat->fix_mac_speed = data->fix_retime_src;
 	plat_dat->init = sti_dwmac_init;
 	plat_dat->exit = sti_dwmac_exit;
-- 
2.47.3


  parent reply	other threads:[~2025-11-06 11:24 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-06 11:21 [PATCH net-next 0/9] net: stmmac: lpc18xx and sti: convert to set_phy_intf_sel() Russell King (Oracle)
2025-11-06 11:23 ` [PATCH net-next 1/9] net: stmmac: lpc18xx: convert to PHY_INTF_SEL_x Russell King (Oracle)
2025-11-06 11:23 ` [PATCH net-next 2/9] net: stmmac: lpc18xx: use PHY_INTF_SEL_x directly Russell King (Oracle)
2025-11-06 11:23 ` [PATCH net-next 3/9] net: stmmac: lpc18xx: use stmmac_get_phy_intf_sel() Russell King (Oracle)
2025-11-06 11:23 ` [PATCH net-next 4/9] net: stmmac: lpc18xx: validate phy_intf_sel Russell King (Oracle)
2025-11-06 11:23 ` [PATCH net-next 5/9] net: stmmac: lpc18xx: use ->set_phy_intf_sel() Russell King (Oracle)
2025-11-06 11:23 ` [PATCH net-next 6/9] net: stmmac: sti: use PHY_INTF_SEL_x to select PHY interface Russell King (Oracle)
2025-11-06 11:23 ` [PATCH net-next 7/9] net: stmmac: sti: use PHY_INTF_SEL_x directly Russell King (Oracle)
2025-11-06 11:23 ` [PATCH net-next 8/9] net: stmmac: sti: use stmmac_get_phy_intf_sel() Russell King (Oracle)
2025-11-06 11:23 ` Russell King (Oracle) [this message]
2025-11-08  3:20 ` [PATCH net-next 0/9] net: stmmac: lpc18xx and sti: convert to set_phy_intf_sel() patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1vGy5o-0000000DhQn-34JE@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=vz@mleia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).