From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Vinod Koul <vkoul@kernel.org>
Subject: [PATCH net-next v2 3/3] net: stmmac: qcom-ethqos: use read_poll_timeout_atomic()
Date: Thu, 20 Nov 2025 11:25:27 +0000 [thread overview]
Message-ID: <E1vM2n1-0000000FRTu-0js9@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <aR76i0HjXitfl7xk@shell.armlinux.org.uk>
Use read_poll_timeout_atomic() to poll the rgmii registers rather than
open-coding the polling.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
.../stmicro/stmmac/dwmac-qcom-ethqos.c | 44 ++++++-------------
1 file changed, 14 insertions(+), 30 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 1f84bd821c4e..0826a7bd32ff 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -311,7 +311,6 @@ static const struct ethqos_emac_driver_data emac_v4_0_0_data = {
static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
{
struct device *dev = ðqos->pdev->dev;
- int retry = 1000;
u32 val;
/* Set CDR_EN */
@@ -337,15 +336,10 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
}
/* Wait for CK_OUT_EN clear */
- do {
- val = rgmii_readl(ethqos, SDCC_HC_REG_DLL_CONFIG);
- val &= SDCC_DLL_CONFIG_CK_OUT_EN;
- if (!val)
- break;
- mdelay(1);
- retry--;
- } while (retry > 0);
- if (!retry)
+ if (read_poll_timeout_atomic(rgmii_readl, val,
+ !(val & SDCC_DLL_CONFIG_CK_OUT_EN),
+ 1000, 1000000, false,
+ ethqos, SDCC_HC_REG_DLL_CONFIG))
dev_err(dev, "Clear CK_OUT_EN timedout\n");
/* Set CK_OUT_EN */
@@ -353,16 +347,10 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
SDCC_HC_REG_DLL_CONFIG);
/* Wait for CK_OUT_EN set */
- retry = 1000;
- do {
- val = rgmii_readl(ethqos, SDCC_HC_REG_DLL_CONFIG);
- val &= SDCC_DLL_CONFIG_CK_OUT_EN;
- if (val)
- break;
- mdelay(1);
- retry--;
- } while (retry > 0);
- if (!retry)
+ if (read_poll_timeout_atomic(rgmii_readl, val,
+ val & SDCC_DLL_CONFIG_CK_OUT_EN,
+ 1000, 1000000, false,
+ ethqos, SDCC_HC_REG_DLL_CONFIG))
dev_err(dev, "Set CK_OUT_EN timedout\n");
/* Set DDR_CAL_EN */
@@ -531,8 +519,8 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos, int speed)
{
struct device *dev = ðqos->pdev->dev;
- volatile u32 dll_lock;
- unsigned int i, retry = 1000;
+ unsigned int i;
+ u32 val;
/* Reset to POR values and enable clk */
for (i = 0; i < ethqos->num_por; i++)
@@ -582,14 +570,10 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos, int speed)
SDCC_USR_CTL);
/* wait for DLL LOCK */
- do {
- mdelay(1);
- dll_lock = rgmii_readl(ethqos, SDC4_STATUS);
- if (dll_lock & SDC4_STATUS_DLL_LOCK)
- break;
- retry--;
- } while (retry > 0);
- if (!retry)
+ if (read_poll_timeout_atomic(rgmii_readl, val,
+ val & SDC4_STATUS_DLL_LOCK,
+ 1000, 1000000, true,
+ ethqos, SDC4_STATUS))
dev_err(dev, "Timeout while waiting for DLL lock\n");
}
--
2.47.3
next prev parent reply other threads:[~2025-11-20 11:25 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-20 11:24 [PATCH net-next v2 0/3] net: stmmac: qcon-ethqos: "rgmii" accessor cleanups Russell King (Oracle)
2025-11-20 11:25 ` [PATCH net-next v2 1/3] net: stmmac: qcom-ethqos: use u32 for rgmii read/write/update Russell King (Oracle)
2025-11-20 11:30 ` Russell King (Oracle)
2025-11-20 11:25 ` [PATCH net-next v2 2/3] net: stmmac: qcom-ethqos: add rgmii set/clear functions Russell King (Oracle)
2025-11-20 12:07 ` Konrad Dybcio
2025-11-20 11:25 ` Russell King (Oracle) [this message]
2025-11-22 2:20 ` [PATCH net-next v2 0/3] net: stmmac: qcon-ethqos: "rgmii" accessor cleanups patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1vM2n1-0000000FRTu-0js9@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).