From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Heiko Stuebner <heiko@sntech.de>,
Jakub Kicinski <kuba@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>
Subject: [PATCH RFC net-next 11/15] net: stmmac: rk: convert px30
Date: Mon, 01 Dec 2025 14:51:38 +0000 [thread overview]
Message-ID: <E1vQ5Fa-0000000GNwT-48iR@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <aS2rFBlz1jdwXaS8@shell.armlinux.org.uk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
.../net/ethernet/stmicro/stmmac/dwmac-rk.c | 38 ++-----------------
1 file changed, 4 insertions(+), 34 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index c26bd22658c6..4c80a73bbf74 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -237,49 +237,19 @@ static void rk_gmac_integrated_fephy_powerdown(struct rk_priv_data *priv,
#define PX30_GRF_GMAC_CON1 0x0904
-/* PX30_GRF_GMAC_CON1 */
-#define PX30_GMAC_SPEED_10M GRF_CLR_BIT(2)
-#define PX30_GMAC_SPEED_100M GRF_BIT(2)
-
static void px30_set_to_rmii(struct rk_priv_data *bsp_priv)
{
}
-static int px30_set_speed(struct rk_priv_data *bsp_priv,
- phy_interface_t interface, int speed)
-{
- struct clk *clk_mac_speed = bsp_priv->clks[RK_CLK_MAC_SPEED].clk;
- struct device *dev = bsp_priv->dev;
- unsigned int con1;
- long rate;
-
- if (!clk_mac_speed) {
- dev_err(dev, "%s: Missing clk_mac_speed clock\n", __func__);
- return -EINVAL;
- }
-
- if (speed == 10) {
- con1 = PX30_GMAC_SPEED_10M;
- rate = 2500000;
- } else if (speed == 100) {
- con1 = PX30_GMAC_SPEED_100M;
- rate = 25000000;
- } else {
- dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
- return -EINVAL;
- }
-
- regmap_write(bsp_priv->grf, PX30_GRF_GMAC_CON1, con1);
-
- return clk_set_rate(clk_mac_speed, rate);
-}
-
static const struct rk_gmac_ops px30_ops = {
.set_to_rmii = px30_set_to_rmii,
- .set_speed = px30_set_speed,
+ .set_speed = rk_set_clk_mac_speed,
.phy_intf_sel_grf_reg = PX30_GRF_GMAC_CON1,
.phy_intf_sel_mask = GENMASK_U16(6, 4),
+
+ .speed_grf_reg = PX30_GRF_GMAC_CON1,
+ .mac_speed_mask = BIT_U16(2),
};
#define RK3128_GRF_MAC_CON0 0x0168
--
2.47.3
next prev parent reply other threads:[~2025-12-01 14:52 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-01 14:49 [PATCH RFC net-next 00/15] net: stmmac: rk: cleanups galore Russell King (Oracle)
2025-12-01 14:50 ` [PATCH RFC net-next 01/15] net: stmmac: rk: add GMAC_CLK_xx constants, simplify RGMII definitions Russell King (Oracle)
2025-12-02 20:31 ` Andrew Lunn
2025-12-01 14:50 ` [PATCH RFC net-next 02/15] net: stmmac: rk: convert rk3328 to use bsp_priv->id Russell King (Oracle)
2025-12-01 14:50 ` [PATCH RFC net-next 03/15] net: stmmac: rk: add SoC specific ->init() method Russell King (Oracle)
2025-12-01 14:51 ` [PATCH RFC net-next 04/15] net: stmmac: rk: convert to mask-based interface mode configuration Russell King (Oracle)
2025-12-02 20:41 ` Russell King (Oracle)
2025-12-01 14:51 ` [PATCH RFC net-next 05/15] net: stmmac: rk: move speed GRF register offset to private data Russell King (Oracle)
2025-12-01 14:51 ` [PATCH RFC net-next 06/15] net: stmmac: rk: convert rk3588 to rk_set_reg_speed() Russell King (Oracle)
2025-12-01 14:51 ` [PATCH RFC net-next 07/15] net: stmmac: rk: use rk_encode_wm16() for RGMII clocks Russell King (Oracle)
2025-12-01 14:51 ` [PATCH RFC net-next 08/15] net: stmmac: rk: use rk_encode_wm16() for RMII speed Russell King (Oracle)
2025-12-01 14:51 ` [PATCH RFC net-next 09/15] net: stmmac: rk: use rk_encode_wm16() for RMII clock Russell King (Oracle)
2025-12-01 14:51 ` [PATCH RFC net-next 10/15] net: stmmac: rk: move speed register into bsp_priv Russell King (Oracle)
2025-12-01 14:51 ` Russell King (Oracle) [this message]
2025-12-01 14:51 ` [PATCH RFC net-next 12/15] net: stmmac: rk: introduce flags indicating support for RGMII/RMII Russell King (Oracle)
2025-12-01 14:51 ` [PATCH RFC net-next 13/15] net: stmmac: rk: replace empty set_to_rmii() with supports_rmii Russell King (Oracle)
2025-12-01 14:51 ` [PATCH RFC net-next 14/15] net: stmmac: rk: rk3328: gmac2phy only supports RMII Russell King (Oracle)
2025-12-01 14:51 ` [PATCH RFC net-next 15/15] net: stmmac: rk: rk3528: gmac0 " Russell King (Oracle)
2025-12-01 15:55 ` [PATCH RFC net-next 00/15] net: stmmac: rk: cleanups galore Andrew Lunn
2025-12-01 16:38 ` Russell King (Oracle)
2025-12-04 0:50 ` Jacob Keller
2025-12-01 16:44 ` Russell King (Oracle)
2025-12-04 0:51 ` Jacob Keller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1vQ5Fa-0000000GNwT-48iR@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=heiko@sntech.de \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).