public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
	Vinod Koul <vkoul@kernel.org>
Subject: [PATCH net-next 06/14] net: stmmac: qcom-ethqos: convert to dwmac generic SerDes support
Date: Wed, 14 Jan 2026 17:45:39 +0000	[thread overview]
Message-ID: <E1vg4w7-00000003SGB-2foG@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <aWfWDsCoBc3YRKKo@shell.armlinux.org.uk>

Convert qcom-ethqos to use the dwmac core's generic SerDes support,
which will handle SerDes initialisation, powering, and mode setting.

Note that generic support requires the SerDes to support phy_validate()
in order to probe which PHY interface modes are supported, and
phy_set_mode_ext() to configure the appropriate PHY interface mode
(and thus the speed.)

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 50 ++-----------------
 1 file changed, 3 insertions(+), 47 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 80ea69fc8ee5..a0b893d3fbd4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -103,8 +103,6 @@ struct qcom_ethqos {
 	int (*configure_func)(struct qcom_ethqos *ethqos, int speed);
 
 	struct clk *link_clk;
-	struct phy *serdes_phy;
-	int serdes_speed;
 	phy_interface_t phy_mode;
 
 	const struct ethqos_emac_por *por;
@@ -584,14 +582,6 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos, int speed)
 	return 0;
 }
 
-static void ethqos_set_serdes_speed(struct qcom_ethqos *ethqos, int speed)
-{
-	if (ethqos->serdes_speed != speed) {
-		phy_set_speed(ethqos->serdes_phy, speed);
-		ethqos->serdes_speed = speed;
-	}
-}
-
 static void ethqos_pcs_set_inband(struct stmmac_priv *priv, bool enable)
 {
 	stmmac_pcs_ctrl_ane(priv, enable, 0);
@@ -609,17 +599,14 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos, int speed)
 	case SPEED_2500:
 		rgmii_setmask(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
 			      RGMII_IO_MACRO_CONFIG2);
-		ethqos_set_serdes_speed(ethqos, SPEED_2500);
 		ethqos_pcs_set_inband(priv, false);
 		break;
 	case SPEED_1000:
 		rgmii_setmask(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
 			      RGMII_IO_MACRO_CONFIG2);
-		ethqos_set_serdes_speed(ethqos, SPEED_1000);
 		ethqos_pcs_set_inband(priv, true);
 		break;
 	case SPEED_100:
-		ethqos_set_serdes_speed(ethqos, SPEED_1000);
 		ethqos_pcs_set_inband(priv, true);
 		break;
 	case SPEED_10:
@@ -627,7 +614,6 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos, int speed)
 			      FIELD_PREP(RGMII_CONFIG_SGMII_CLK_DVDR,
 					 SGMII_10M_RX_CLK_DVDR),
 			      RGMII_IO_MACRO_CONFIG);
-		ethqos_set_serdes_speed(ethqos, SPEED_1000);
 		ethqos_pcs_set_inband(priv, true);
 		break;
 	}
@@ -648,30 +634,6 @@ static void ethqos_fix_mac_speed(void *priv, int speed, unsigned int mode)
 	ethqos_configure(ethqos, speed);
 }
 
-static int qcom_ethqos_serdes_powerup(struct net_device *ndev, void *priv)
-{
-	struct qcom_ethqos *ethqos = priv;
-	int ret;
-
-	ret = phy_init(ethqos->serdes_phy);
-	if (ret)
-		return ret;
-
-	ret = phy_power_on(ethqos->serdes_phy);
-	if (ret)
-		return ret;
-
-	return phy_set_speed(ethqos->serdes_phy, ethqos->serdes_speed);
-}
-
-static void qcom_ethqos_serdes_powerdown(struct net_device *ndev, void *priv)
-{
-	struct qcom_ethqos *ethqos = priv;
-
-	phy_power_off(ethqos->serdes_phy);
-	phy_exit(ethqos->serdes_phy);
-}
-
 static int ethqos_clks_config(void *priv, bool enabled)
 {
 	struct qcom_ethqos *ethqos = priv;
@@ -790,12 +752,11 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ethqos->serdes_phy = devm_phy_optional_get(dev, "serdes");
-	if (IS_ERR(ethqos->serdes_phy))
-		return dev_err_probe(dev, PTR_ERR(ethqos->serdes_phy),
+	plat_dat->serdes = devm_phy_optional_get(dev, "serdes");
+	if (IS_ERR(plat_dat->serdes))
+		return dev_err_probe(dev, PTR_ERR(plat_dat->serdes),
 				     "Failed to get serdes phy\n");
 
-	ethqos->serdes_speed = SPEED_1000;
 	ethqos_set_clk_tx_rate(ethqos, NULL, plat_dat->phy_interface,
 			       SPEED_1000);
 	ethqos_set_func_clk_en(ethqos);
@@ -816,11 +777,6 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	if (data->dma_addr_width)
 		plat_dat->host_dma_width = data->dma_addr_width;
 
-	if (ethqos->serdes_phy) {
-		plat_dat->serdes_powerup = qcom_ethqos_serdes_powerup;
-		plat_dat->serdes_powerdown  = qcom_ethqos_serdes_powerdown;
-	}
-
 	/* Enable TSO on queue0 and enable TBS on rest of the queues */
 	for (i = 1; i < plat_dat->tx_queues_to_use; i++)
 		plat_dat->tx_queues_cfg[i].tbs_en = 1;
-- 
2.47.3


  parent reply	other threads:[~2026-01-14 17:45 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-14 17:44 [PATCH RFC net-next 00/14] net: stmmac: SerDes, PCS, BASE-X, and inband goodies Russell King (Oracle)
2026-01-14 17:45 ` [PATCH net-next 01/14] net: stmmac: qcom-ethqos: remove mac_base Russell King (Oracle)
2026-01-14 20:48   ` Vladimir Oltean
2026-01-14 17:45 ` [PATCH net-next 02/14] net: stmmac: qcom-ethqos: convert to set_clk_tx_rate() method Russell King (Oracle)
2026-01-14 17:45 ` [PATCH net-next 03/14] phy: qcom-sgmii-eth: add .set_mode() and .validate() methods Russell King (Oracle)
2026-01-14 18:47   ` Vladimir Oltean
2026-01-14 18:55     ` Russell King (Oracle)
2026-01-14 19:02       ` Vladimir Oltean
2026-01-15 10:11   ` kernel test robot
2026-01-15 10:23   ` kernel test robot
2026-01-14 17:45 ` [PATCH net-next 04/14] net: stmmac: wrap phylink's rx_clk_stop functions Russell King (Oracle)
2026-01-15 14:47   ` Maxime Chevallier
2026-01-14 17:45 ` [PATCH net-next 05/14] net: stmmac: add stmmac core serdes support Russell King (Oracle)
2026-01-15 14:48   ` Maxime Chevallier
2026-01-15 15:15     ` Russell King (Oracle)
2026-01-16  2:57   ` [net-next,05/14] " Jakub Kicinski
2026-01-14 17:45 ` Russell King (Oracle) [this message]
2026-01-14 17:45 ` [PATCH net-next 07/14] net: stmmac: move most PCS register definitions to stmmac_pcs.c Russell King (Oracle)
2026-01-14 17:45 ` [PATCH net-next 08/14] net: stmmac: handle integrated PCS phy_intf_sel separately Russell King (Oracle)
2026-01-14 17:45 ` [PATCH net-next 09/14] net: stmmac: add BASE-X support to integrated PCS Russell King (Oracle)
2026-01-14 17:46 ` [PATCH net-next 10/14] net: stmmac: use integrated PCS for BASE-X modes Russell King (Oracle)
2026-01-14 17:46 ` [PATCH net-next 11/14] net: stmmac: add struct stmmac_pcs_info Russell King (Oracle)
2026-01-14 17:46 ` [PATCH net-next 12/14] net: stmmac: add support for reading inband SGMII status Russell King (Oracle)
2026-01-16  2:58   ` [net-next,12/14] " Jakub Kicinski
2026-01-14 17:46 ` [PATCH net-next 13/14] net: stmmac: configure SGMII AN control according to phylink Russell King (Oracle)
2026-01-14 17:46 ` [PATCH net-next 14/14] net: stmmac: report PCS configuration changes Russell King (Oracle)
  -- strict thread matches above, loose matches on Subject: below --
2026-01-19 12:32 [PATCH net-next 00/14] net: stmmac: SerDes, PCS, BASE-X, and inband goodies Russell King (Oracle)
2026-01-19 12:34 ` [PATCH net-next 06/14] net: stmmac: qcom-ethqos: convert to dwmac generic SerDes support Russell King (Oracle)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1vg4w7-00000003SGB-2foG@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=konrad.dybcio@oss.qualcomm.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mohd.anwar@oss.qualcomm.com \
    --cc=neil.armstrong@linaro.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox