From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Vinod Koul <vkoul@kernel.org>
Subject: [PATCH net-next 12/14] net: stmmac: add support for reading inband SGMII status
Date: Wed, 14 Jan 2026 17:46:10 +0000 [thread overview]
Message-ID: <E1vg4wc-00000003SGl-1dZi@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <aWfWDsCoBc3YRKKo@shell.armlinux.org.uk>
Report the link, speed and duplex for SGMII links, read from the
SGMII, RGMII and SMII status and control register.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
.../net/ethernet/stmicro/stmmac/stmmac_pcs.c | 44 ++++++++++++++++++-
.../net/ethernet/stmicro/stmmac/stmmac_pcs.h | 4 ++
2 files changed, 46 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c
index 73fc56ce5e55..12fc5038d913 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c
@@ -17,6 +17,16 @@
#define GMAC_ANE_LPA 0x0c /* ANE link partener ability */
#define GMAC_TBI 0x14 /* TBI extend status */
+/*
+ * RGSMII status bitfield definitions.
+ */
+#define GMAC_RGSMIII_LNKMOD BIT(0)
+#define GMAC_RGSMIII_SPEED_MASK GENMASK(2, 1)
+#define GMAC_RGSMIII_SPEED_125 2
+#define GMAC_RGSMIII_SPEED_25 1
+#define GMAC_RGSMIII_SPEED_2_5 0
+#define GMAC_RGSMIII_LNKSTS BIT(3)
+
static enum ethtool_link_mode_bit_indices dwmac_hd_mode_bits[] = {
ETHTOOL_LINK_MODE_10baseT_Half_BIT,
ETHTOOL_LINK_MODE_100baseT_Half_BIT,
@@ -97,7 +107,7 @@ static void dwmac_integrated_pcs_get_state(struct phylink_pcs *pcs,
struct phylink_link_state *state)
{
struct stmmac_pcs *spcs = phylink_pcs_to_stmmac_pcs(pcs);
- u32 status, lpa;
+ u32 status, lpa, rgsmii;
status = readl(spcs->base + GMAC_AN_STATUS);
@@ -111,7 +121,35 @@ static void dwmac_integrated_pcs_get_state(struct phylink_pcs *pcs,
phylink_mii_c22_pcs_decode_state(state, neg_mode, status, lpa);
} else {
- state->link = false;
+ rgsmii = field_get(spcs->rgsmii_status_mask,
+ readl(spcs->rgsmii));
+ state->link = !!(status & GMAC_RGSMIII_LNKSTS);
+
+ if (state->link && neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
+ /* FIXME: fill in speed and duplex. This requires the
+ * contents of the dwmac1000 GMAC_RGSMIIIS or dwmac4
+ * GMAC_PHYIF_CONTROL_STATUS register.
+ */
+ state->duplex = rgsmii & GMAC_RGSMIII_LNKMOD ?
+ DUPLEX_FULL : DUPLEX_HALF;
+ switch (FIELD_GET(GMAC_RGSMIII_SPEED_MASK, rgsmii)) {
+ case GMAC_RGSMIII_SPEED_2_5:
+ state->speed = SPEED_10;
+ break;
+
+ case GMAC_RGSMIII_SPEED_25:
+ state->speed = SPEED_100;
+ break;
+
+ case GMAC_RGSMIII_SPEED_125:
+ state->speed = SPEED_1000;
+ break;
+
+ default:
+ state->link = false;
+ break;
+ }
+ }
}
}
@@ -205,6 +243,8 @@ int stmmac_integrated_pcs_init(struct stmmac_priv *priv,
spcs->priv = priv;
spcs->base = priv->ioaddr + pcs_info->pcs_offset;
+ spcs->rgsmii = priv->ioaddr + pcs_info->rgsmii_offset;
+ spcs->rgsmii_status_mask = pcs_info->rgsmii_status_mask;
spcs->int_mask = pcs_info->int_mask;
spcs->pcs.ops = &dwmac_integrated_pcs_ops;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
index a7c71f40f952..f9e7a7ed840b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
@@ -29,12 +29,16 @@ struct stmmac_priv;
struct stmmac_pcs_info {
unsigned int pcs_offset;
+ unsigned int rgsmii_offset;
+ u32 rgsmii_status_mask;
u32 int_mask;
};
struct stmmac_pcs {
struct stmmac_priv *priv;
void __iomem *base;
+ void __iomem *rgsmii;
+ u32 rgsmii_status_mask;
u32 int_mask;
phy_interface_t interface;
struct phylink_pcs pcs;
--
2.47.3
next prev parent reply other threads:[~2026-01-14 17:58 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-14 17:44 [PATCH RFC net-next 00/14] net: stmmac: SerDes, PCS, BASE-X, and inband goodies Russell King (Oracle)
2026-01-14 17:45 ` [PATCH net-next 01/14] net: stmmac: qcom-ethqos: remove mac_base Russell King (Oracle)
2026-01-14 20:48 ` Vladimir Oltean
2026-01-14 17:45 ` [PATCH net-next 02/14] net: stmmac: qcom-ethqos: convert to set_clk_tx_rate() method Russell King (Oracle)
2026-01-14 17:45 ` [PATCH net-next 03/14] phy: qcom-sgmii-eth: add .set_mode() and .validate() methods Russell King (Oracle)
2026-01-14 18:47 ` Vladimir Oltean
2026-01-14 18:55 ` Russell King (Oracle)
2026-01-14 19:02 ` Vladimir Oltean
2026-01-15 10:11 ` kernel test robot
2026-01-15 10:23 ` kernel test robot
2026-01-14 17:45 ` [PATCH net-next 04/14] net: stmmac: wrap phylink's rx_clk_stop functions Russell King (Oracle)
2026-01-15 14:47 ` Maxime Chevallier
2026-01-14 17:45 ` [PATCH net-next 05/14] net: stmmac: add stmmac core serdes support Russell King (Oracle)
2026-01-15 14:48 ` Maxime Chevallier
2026-01-15 15:15 ` Russell King (Oracle)
2026-01-16 2:57 ` [net-next,05/14] " Jakub Kicinski
2026-01-14 17:45 ` [PATCH net-next 06/14] net: stmmac: qcom-ethqos: convert to dwmac generic SerDes support Russell King (Oracle)
2026-01-14 17:45 ` [PATCH net-next 07/14] net: stmmac: move most PCS register definitions to stmmac_pcs.c Russell King (Oracle)
2026-01-14 17:45 ` [PATCH net-next 08/14] net: stmmac: handle integrated PCS phy_intf_sel separately Russell King (Oracle)
2026-01-14 17:45 ` [PATCH net-next 09/14] net: stmmac: add BASE-X support to integrated PCS Russell King (Oracle)
2026-01-14 17:46 ` [PATCH net-next 10/14] net: stmmac: use integrated PCS for BASE-X modes Russell King (Oracle)
2026-01-14 17:46 ` [PATCH net-next 11/14] net: stmmac: add struct stmmac_pcs_info Russell King (Oracle)
2026-01-14 17:46 ` Russell King (Oracle) [this message]
2026-01-16 2:58 ` [net-next,12/14] net: stmmac: add support for reading inband SGMII status Jakub Kicinski
2026-01-14 17:46 ` [PATCH net-next 13/14] net: stmmac: configure SGMII AN control according to phylink Russell King (Oracle)
2026-01-14 17:46 ` [PATCH net-next 14/14] net: stmmac: report PCS configuration changes Russell King (Oracle)
-- strict thread matches above, loose matches on Subject: below --
2026-01-19 12:32 [PATCH net-next 00/14] net: stmmac: SerDes, PCS, BASE-X, and inband goodies Russell King (Oracle)
2026-01-19 12:34 ` [PATCH net-next 12/14] net: stmmac: add support for reading inband SGMII status Russell King (Oracle)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1vg4wc-00000003SGl-1dZi@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mohd.anwar@oss.qualcomm.com \
--cc=neil.armstrong@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox