From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Vinod Koul <vkoul@kernel.org>
Subject: [PATCH net-next 07/14] net: stmmac: move most PCS register definitions to stmmac_pcs.c
Date: Mon, 19 Jan 2026 12:34:11 +0000 [thread overview]
Message-ID: <E1vhoSR-00000005H1q-3Ufj@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <aW4kakF3Ly7VaxN6@shell.armlinux.org.uk>
Move most of the PCS register offset definitions to stmmac_pcs.c.
Since stmmac_pcs.c only ever passes zero into the register offset
macros, remove that ability, making them simple constant integer
definitions.
Add appropriate descriptions of the registers, pointing out their
similarity with their IEEE 802.3 counterparts. Make use of the
BMSR definitions for the GMAC_AN_STATUS register and remove the
driver private versions.
Note that BMSR_LSTATUS is non-low-latching, unlike it's 802.3z
counterpart.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
.../net/ethernet/stmicro/stmmac/stmmac_pcs.c | 22 +++++++++++++++----
.../net/ethernet/stmicro/stmmac/stmmac_pcs.h | 22 -------------------
2 files changed, 18 insertions(+), 26 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c
index 4d1902f3a58f..718e5360fca3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c
@@ -3,6 +3,20 @@
#include "stmmac_pcs.h"
#include "stmmac_serdes.h"
+/*
+ * GMAC_AN_STATUS is equivalent to MII_BMSR
+ * GMAC_ANE_ADV is equivalent to 802.3z MII_ADVERTISE
+ * GMAC_ANE_LPA is equivalent to 802.3z MII_LPA
+ * GMAC_ANE_EXP is equivalent to MII_EXPANSION
+ * GMAC_TBI is equivalent to MII_ESTATUS
+ *
+ * ADV, LPA and EXP are only available for the TBI and RTBI modes.
+ */
+#define GMAC_AN_STATUS 0x04 /* AN status */
+#define GMAC_ANE_ADV 0x08 /* ANE Advertisement */
+#define GMAC_ANE_LPA 0x0c /* ANE link partener ability */
+#define GMAC_TBI 0x14 /* TBI extend status */
+
static int dwmac_integrated_pcs_enable(struct phylink_pcs *pcs)
{
struct stmmac_pcs *spcs = phylink_pcs_to_stmmac_pcs(pcs);
@@ -74,11 +88,11 @@ void stmmac_integrated_pcs_irq(struct stmmac_priv *priv, u32 status,
struct stmmac_extra_stats *x)
{
struct stmmac_pcs *spcs = priv->integrated_pcs;
- u32 val = readl(spcs->base + GMAC_AN_STATUS(0));
+ u32 val = readl(spcs->base + GMAC_AN_STATUS);
if (status & PCS_ANE_IRQ) {
x->irq_pcs_ane_n++;
- if (val & GMAC_AN_STATUS_ANC)
+ if (val & BMSR_ANEGCOMPLETE)
dev_info(priv->device,
"PCS ANE process completed\n");
}
@@ -86,9 +100,9 @@ void stmmac_integrated_pcs_irq(struct stmmac_priv *priv, u32 status,
if (status & PCS_LINK_IRQ) {
x->irq_pcs_link_n++;
dev_info(priv->device, "PCS Link %s\n",
- val & GMAC_AN_STATUS_LS ? "Up" : "Down");
+ val & BMSR_LSTATUS ? "Up" : "Down");
- phylink_pcs_change(&spcs->pcs, val & GMAC_AN_STATUS_LS);
+ phylink_pcs_change(&spcs->pcs, val & BMSR_LSTATUS);
}
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
index 36bf75fdf478..887c4ff302aa 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
@@ -16,13 +16,6 @@
/* PCS registers (AN/TBI/SGMII/RGMII) offsets */
#define GMAC_AN_CTRL(x) (x) /* AN control */
-#define GMAC_AN_STATUS(x) (x + 0x4) /* AN status */
-
-/* ADV, LPA and EXP are only available for the TBI and RTBI interfaces */
-#define GMAC_ANE_ADV(x) (x + 0x8) /* ANE Advertisement */
-#define GMAC_ANE_LPA(x) (x + 0xc) /* ANE link partener ability */
-#define GMAC_ANE_EXP(x) (x + 0x10) /* ANE expansion */
-#define GMAC_TBI(x) (x + 0x14) /* TBI extend status */
/* AN Configuration defines */
#define GMAC_AN_CTRL_RAN BIT_U32(9) /* Restart Auto-Negotiation */
@@ -32,21 +25,6 @@
#define GMAC_AN_CTRL_LR BIT_U32(17) /* Lock to Reference */
#define GMAC_AN_CTRL_SGMRAL BIT_U32(18) /* SGMII RAL Control */
-/* AN Status defines */
-#define GMAC_AN_STATUS_LS BIT_U32(2) /* Link Status 0:down 1:up */
-#define GMAC_AN_STATUS_ANA BIT_U32(3) /* Auto-Negotiation Ability */
-#define GMAC_AN_STATUS_ANC BIT_U32(5) /* Auto-Negotiation Complete */
-#define GMAC_AN_STATUS_ES BIT_U32(8) /* Extended Status */
-
-/* ADV and LPA defines */
-#define GMAC_ANE_FD BIT_U32(5)
-#define GMAC_ANE_HD BIT_U32(6)
-#define GMAC_ANE_PSE GENMASK_U32(8, 7)
-#define GMAC_ANE_PSE_SHIFT 7
-#define GMAC_ANE_RFE GENMASK_U32(13, 12)
-#define GMAC_ANE_RFE_SHIFT 12
-#define GMAC_ANE_ACK BIT_U32(14)
-
struct stmmac_priv;
struct stmmac_pcs {
--
2.47.3
next prev parent reply other threads:[~2026-01-19 12:34 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-19 12:32 [PATCH net-next 00/14] net: stmmac: SerDes, PCS, BASE-X, and inband goodies Russell King (Oracle)
2026-01-19 12:33 ` [PATCH net-next 01/14] net: stmmac: qcom-ethqos: remove mac_base Russell King (Oracle)
2026-01-19 13:59 ` Bartosz Golaszewski
2026-01-19 12:33 ` [PATCH net-next 02/14] net: stmmac: qcom-ethqos: convert to set_clk_tx_rate() method Russell King (Oracle)
2026-01-19 14:00 ` Bartosz Golaszewski
2026-01-19 12:33 ` [PATCH net-next 03/14] phy: qcom-sgmii-eth: add .set_mode() and .validate() methods Russell King (Oracle)
2026-01-19 14:00 ` Bartosz Golaszewski
2026-01-21 7:10 ` Vinod Koul
2026-01-19 12:33 ` [PATCH net-next 04/14] net: stmmac: wrap phylink's rx_clk_stop functions Russell King (Oracle)
2026-01-19 12:34 ` [PATCH net-next 05/14] net: stmmac: add stmmac core serdes support Russell King (Oracle)
2026-01-19 19:21 ` [net-next,05/14] " Jakub Kicinski
2026-01-20 5:04 ` Russell King (Oracle)
2026-01-20 8:18 ` Vladimir Oltean
2026-01-20 10:12 ` Russell King (Oracle)
2026-01-20 12:11 ` Vladimir Oltean
2026-01-21 14:46 ` Russell King (Oracle)
2026-01-21 16:23 ` Vladimir Oltean
2026-01-21 17:33 ` Russell King (Oracle)
2026-01-22 11:29 ` Vladimir Oltean
2026-01-20 8:42 ` Vladimir Oltean
2026-01-20 10:14 ` Russell King (Oracle)
2026-01-20 23:32 ` Jakub Kicinski
2026-01-19 12:34 ` [PATCH net-next 06/14] net: stmmac: qcom-ethqos: convert to dwmac generic SerDes support Russell King (Oracle)
2026-01-19 12:34 ` Russell King (Oracle) [this message]
2026-01-19 12:34 ` [PATCH net-next 08/14] net: stmmac: handle integrated PCS phy_intf_sel separately Russell King (Oracle)
2026-01-19 12:34 ` [PATCH net-next 09/14] net: stmmac: add BASE-X support to integrated PCS Russell King (Oracle)
2026-01-19 12:34 ` [PATCH net-next 10/14] net: stmmac: use integrated PCS for BASE-X modes Russell King (Oracle)
2026-01-19 13:20 ` Maxime Chevallier
2026-01-19 12:34 ` [PATCH net-next 11/14] net: stmmac: add struct stmmac_pcs_info Russell King (Oracle)
2026-01-19 13:23 ` Maxime Chevallier
2026-01-19 12:34 ` [PATCH net-next 12/14] net: stmmac: add support for reading inband SGMII status Russell King (Oracle)
2026-01-19 19:21 ` [net-next,12/14] " Jakub Kicinski
2026-01-19 12:34 ` [PATCH net-next 13/14] net: stmmac: configure SGMII AN control according to phylink Russell King (Oracle)
2026-01-19 12:34 ` [PATCH net-next 14/14] net: stmmac: report PCS configuration changes Russell King (Oracle)
2026-01-19 14:27 ` Russell King (Oracle)
-- strict thread matches above, loose matches on Subject: below --
2026-01-14 17:44 [PATCH RFC net-next 00/14] net: stmmac: SerDes, PCS, BASE-X, and inband goodies Russell King (Oracle)
2026-01-14 17:45 ` [PATCH net-next 07/14] net: stmmac: move most PCS register definitions to stmmac_pcs.c Russell King (Oracle)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1vhoSR-00000005H1q-3Ufj@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=maxime.chevallier@bootlin.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mohd.anwar@oss.qualcomm.com \
--cc=neil.armstrong@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox