[PATCH net-next v2 04/14] net: stmmac: wrap phylink's rx_clk_stop functions

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

With generic SerDes support, stmmac will need to do more work to ensure
that clk_rx_i is running in all configurations. Rather than turn each
site that calls phylink_rx_clk_stop_xxx() into a list of functions,
move these to their own pair of functions so that they can be
augmented at a single location.

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 32 ++++++++++++-------
 1 file changed, 21 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index c2589f02ff7e..24a2555ca329 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3547,6 +3547,16 @@ static void stmmac_safety_feat_configuration(struct stmmac_priv *priv)
 	}
 }
 
+static void stmmac_clk_rx_i_require(struct stmmac_priv *priv)
+{
+	phylink_rx_clk_stop_block(priv->phylink);
+}
+
+static void stmmac_clk_rx_i_release(struct stmmac_priv *priv)
+{
+	phylink_rx_clk_stop_unblock(priv->phylink);
+}
+
 /**
  * stmmac_hw_setup - setup mac in a usable state.
  *  @dev : pointer to the device structure.
@@ -3578,12 +3588,12 @@ static int stmmac_hw_setup(struct net_device *dev)
 	 * Block the receive clock stop for LPI mode at the PHY in case
 	 * the link is established with EEE mode active.
 	 */
-	phylink_rx_clk_stop_block(priv->phylink);
+	stmmac_clk_rx_i_require(priv);
 
 	/* DMA initialization and SW reset */
 	ret = stmmac_init_dma_engine(priv);
 	if (ret < 0) {
-		phylink_rx_clk_stop_unblock(priv->phylink);
+		stmmac_clk_rx_i_release(priv);
 		netdev_err(priv->dev, "%s: DMA engine initialization failed\n",
 			   __func__);
 		return ret;
@@ -3591,7 +3601,7 @@ static int stmmac_hw_setup(struct net_device *dev)
 
 	/* Copy the MAC addr into the HW  */
 	stmmac_set_umac_addr(priv, priv->hw, dev->dev_addr, 0);
-	phylink_rx_clk_stop_unblock(priv->phylink);
+	stmmac_clk_rx_i_release(priv);
 
 	/* Initialize the MAC Core */
 	stmmac_core_init(priv, priv->hw, dev);
@@ -3670,9 +3680,9 @@ static int stmmac_hw_setup(struct net_device *dev)
 	/* Start the ball rolling... */
 	stmmac_start_all_dma(priv);
 
-	phylink_rx_clk_stop_block(priv->phylink);
+	stmmac_clk_rx_i_require(priv);
 	stmmac_set_hw_vlan_mode(priv, priv->hw);
-	phylink_rx_clk_stop_unblock(priv->phylink);
+	stmmac_clk_rx_i_release(priv);
 
 	return 0;
 }
@@ -6107,9 +6117,9 @@ static int stmmac_set_features(struct net_device *netdev,
 	else
 		priv->hw->hw_vlan_en = false;
 
-	phylink_rx_clk_stop_block(priv->phylink);
+	stmmac_clk_rx_i_require(priv);
 	stmmac_set_hw_vlan_mode(priv, priv->hw);
-	phylink_rx_clk_stop_unblock(priv->phylink);
+	stmmac_clk_rx_i_release(priv);
 
 	return 0;
 }
@@ -6378,9 +6388,9 @@ static int stmmac_set_mac_address(struct net_device *ndev, void *addr)
 	if (ret)
 		goto set_mac_error;
 
-	phylink_rx_clk_stop_block(priv->phylink);
+	stmmac_clk_rx_i_require(priv);
 	stmmac_set_umac_addr(priv, priv->hw, ndev->dev_addr, 0);
-	phylink_rx_clk_stop_unblock(priv->phylink);
+	stmmac_clk_rx_i_release(priv);
 
 set_mac_error:
 	pm_runtime_put(priv->device);
@@ -8192,11 +8202,11 @@ int stmmac_resume(struct device *dev)
 	stmmac_init_timestamping(priv);
 
 	stmmac_init_coalesce(priv);
-	phylink_rx_clk_stop_block(priv->phylink);
+	stmmac_clk_rx_i_require(priv);
 	stmmac_set_rx_mode(ndev);
 
 	stmmac_restore_hw_vlan_rx_fltr(priv, ndev, priv->hw);
-	phylink_rx_clk_stop_unblock(priv->phylink);
+	stmmac_clk_rx_i_release(priv);
 
 	stmmac_enable_all_queues(priv);
 	stmmac_enable_all_dma_irq(priv);
-- 
2.47.3