public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Maxime Chevallier <maxime.chevallier@bootlin.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
	Vinod Koul <vkoul@kernel.org>
Subject: [PATCH net-next v2 08/14] net: stmmac: handle integrated PCS phy_intf_sel separately
Date: Fri, 23 Jan 2026 09:53:59 +0000	[thread overview]
Message-ID: <E1vjDrb-00000005fQk-2A8T@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <aXNEwBW3OA1xLEUj@shell.armlinux.org.uk>

The dwmac core has no support for SGMII without using its integrated
PCS. Thus, PHY_INTF_SEL_SGMII is only supported when this block is
present, and it makes no sense for stmmac_get_phy_intf_sel() to decode
this.

None of the platform glue users that use stmmac_get_phy_intf_sel()
directly accept PHY_INTF_SEL_SGMII as a valid mode.

Check whether a PCS will be used by the driver for the interface mode,
and if it is the integrated PCS, query the integrated PCS for the
phy_intf_sel_i value to use.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 ++++++++++++---
 drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c  |  9 +++++++++
 drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h  |  2 ++
 3 files changed, 23 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 6c515f9efbe7..5254d9d19ffe 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3135,8 +3135,6 @@ int stmmac_get_phy_intf_sel(phy_interface_t interface)
 		phy_intf_sel = PHY_INTF_SEL_GMII_MII;
 	else if (phy_interface_mode_is_rgmii(interface))
 		phy_intf_sel = PHY_INTF_SEL_RGMII;
-	else if (interface == PHY_INTERFACE_MODE_SGMII)
-		phy_intf_sel = PHY_INTF_SEL_SGMII;
 	else if (interface == PHY_INTERFACE_MODE_RMII)
 		phy_intf_sel = PHY_INTF_SEL_RMII;
 	else if (interface == PHY_INTERFACE_MODE_REVMII)
@@ -3150,13 +3148,24 @@ static int stmmac_prereset_configure(struct stmmac_priv *priv)
 {
 	struct plat_stmmacenet_data *plat_dat = priv->plat;
 	phy_interface_t interface;
+	struct phylink_pcs *pcs;
 	int phy_intf_sel, ret;
 
 	if (!plat_dat->set_phy_intf_sel)
 		return 0;
 
 	interface = plat_dat->phy_interface;
-	phy_intf_sel = stmmac_get_phy_intf_sel(interface);
+
+	/* Check whether this mode uses a PCS */
+	pcs = stmmac_mac_select_pcs(&priv->phylink_config, interface);
+	if (priv->integrated_pcs && pcs == &priv->integrated_pcs->pcs) {
+		/* Request the phy_intf_sel from the integrated PCS */
+		phy_intf_sel = stmmac_integrated_pcs_get_phy_intf_sel(priv,
+								    interface);
+	} else {
+		phy_intf_sel = stmmac_get_phy_intf_sel(interface);
+	}
+
 	if (phy_intf_sel < 0) {
 		netdev_err(priv->dev,
 			   "failed to get phy_intf_sel for %s: %pe\n",
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c
index ac588756e450..1644e045cfb3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c
@@ -108,6 +108,15 @@ void stmmac_integrated_pcs_irq(struct stmmac_priv *priv, u32 status,
 	}
 }
 
+int stmmac_integrated_pcs_get_phy_intf_sel(struct stmmac_priv *priv,
+					   phy_interface_t interface)
+{
+	if (interface == PHY_INTERFACE_MODE_SGMII)
+		return PHY_INTF_SEL_SGMII;
+
+	return -EINVAL;
+}
+
 int stmmac_integrated_pcs_init(struct stmmac_priv *priv, unsigned int offset,
 			       u32 int_mask)
 {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
index 887c4ff302aa..845bcad9d0f7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
@@ -43,6 +43,8 @@ phylink_pcs_to_stmmac_pcs(struct phylink_pcs *pcs)
 
 void stmmac_integrated_pcs_irq(struct stmmac_priv *priv, u32 status,
 			       struct stmmac_extra_stats *x);
+int stmmac_integrated_pcs_get_phy_intf_sel(struct stmmac_priv *priv,
+					   phy_interface_t interface);
 int stmmac_integrated_pcs_init(struct stmmac_priv *priv, unsigned int offset,
 			       u32 int_mask);
 
-- 
2.47.3


  parent reply	other threads:[~2026-01-23  9:54 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-23  9:52 [PATCH net-next v2 00/14] net: stmmac: SerDes, PCS, BASE-X, and inband goodies Russell King (Oracle)
2026-01-23  9:53 ` [PATCH net-next v2 01/14] net: stmmac: qcom-ethqos: remove mac_base Russell King (Oracle)
2026-01-27 12:06   ` Mohd Ayaan Anwar
2026-01-23  9:53 ` [PATCH net-next v2 02/14] net: stmmac: qcom-ethqos: convert to set_clk_tx_rate() method Russell King (Oracle)
2026-02-17 18:51   ` Mohd Ayaan Anwar
2026-01-23  9:53 ` [PATCH net-next v2 03/14] phy: qcom-sgmii-eth: add .set_mode() and .validate() methods Russell King (Oracle)
2026-01-23  9:53 ` [PATCH net-next v2 04/14] net: stmmac: wrap phylink's rx_clk_stop functions Russell King (Oracle)
2026-01-23  9:53 ` [PATCH net-next v2 05/14] net: stmmac: add stmmac core serdes support Russell King (Oracle)
2026-01-24  0:59   ` Vladimir Oltean
2026-01-23  9:53 ` [PATCH net-next v2 06/14] net: stmmac: qcom-ethqos: convert to dwmac generic SerDes support Russell King (Oracle)
2026-01-23  9:53 ` [PATCH net-next v2 07/14] net: stmmac: move most PCS register definitions to stmmac_pcs.c Russell King (Oracle)
2026-01-23  9:53 ` Russell King (Oracle) [this message]
2026-01-23  9:54 ` [PATCH net-next v2 09/14] net: stmmac: add BASE-X support to integrated PCS Russell King (Oracle)
2026-01-23  9:54 ` [PATCH net-next v2 10/14] net: stmmac: use integrated PCS for BASE-X modes Russell King (Oracle)
2026-01-23  9:54 ` [PATCH net-next v2 11/14] net: stmmac: add struct stmmac_pcs_info Russell King (Oracle)
2026-01-23  9:54 ` [PATCH net-next v2 12/14] net: stmmac: add support for reading inband SGMII status Russell King (Oracle)
2026-01-23  9:54 ` [PATCH net-next v2 13/14] net: stmmac: configure SGMII AN control according to phylink Russell King (Oracle)
2026-01-23  9:54 ` [PATCH net-next v2 14/14] net: stmmac: report PCS configuration changes Russell King (Oracle)
2026-01-23  9:56 ` [PATCH net-next v2 00/14] net: stmmac: SerDes, PCS, BASE-X, and inband goodies Russell King (Oracle)
2026-01-23 11:13 ` Russell King (Oracle)
2026-01-24  0:04   ` Vladimir Oltean
2026-01-24  0:16     ` Russell King (Oracle)
2026-01-23 13:35 ` Mohd Ayaan Anwar
2026-01-23 17:26   ` Russell King (Oracle)
2026-01-27 13:45     ` Mohd Ayaan Anwar
2026-01-23 21:32   ` Russell King (Oracle)
2026-01-27 14:57     ` Mohd Ayaan Anwar
2026-01-27 15:17       ` Andrew Lunn
2026-01-27 15:42       ` Russell King (Oracle)
2026-01-29  7:27         ` Mohd Ayaan Anwar
2026-01-29 22:00           ` Russell King (Oracle)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1vjDrb-00000005fQk-2A8T@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mohd.anwar@oss.qualcomm.com \
    --cc=neil.armstrong@linaro.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox