From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com, netdev@vger.kernel.org,
Paolo Abeni <pabeni@redhat.com>
Subject: [PATCH net-next 3/3] net: stmmac: handle integrated PCS phy_intf_sel separately
Date: Fri, 30 Jan 2026 11:10:36 +0000 [thread overview]
Message-ID: <E1vlmOa-00000006zvB-1fIe@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <aXyRlFw7ZuhRPiKo@shell.armlinux.org.uk>
The dwmac core has no support for SGMII without using its integrated
PCS. Thus, PHY_INTF_SEL_SGMII is only supported when this block is
present, and it makes no sense for stmmac_get_phy_intf_sel() to decode
this.
None of the platform glue users that use stmmac_get_phy_intf_sel()
directly accept PHY_INTF_SEL_SGMII as a valid mode.
Check whether a PCS will be used by the driver for the interface mode,
and if it is the integrated PCS, query the integrated PCS for the
phy_intf_sel_i value to use.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 ++++++++++++---
drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c | 9 +++++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h | 2 ++
3 files changed, 23 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index a3c155cccd9b..b2b90c3c1c45 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3159,8 +3159,6 @@ int stmmac_get_phy_intf_sel(phy_interface_t interface)
phy_intf_sel = PHY_INTF_SEL_GMII_MII;
else if (phy_interface_mode_is_rgmii(interface))
phy_intf_sel = PHY_INTF_SEL_RGMII;
- else if (interface == PHY_INTERFACE_MODE_SGMII)
- phy_intf_sel = PHY_INTF_SEL_SGMII;
else if (interface == PHY_INTERFACE_MODE_RMII)
phy_intf_sel = PHY_INTF_SEL_RMII;
else if (interface == PHY_INTERFACE_MODE_REVMII)
@@ -3174,13 +3172,24 @@ static int stmmac_prereset_configure(struct stmmac_priv *priv)
{
struct plat_stmmacenet_data *plat_dat = priv->plat;
phy_interface_t interface;
+ struct phylink_pcs *pcs;
int phy_intf_sel, ret;
if (!plat_dat->set_phy_intf_sel)
return 0;
interface = plat_dat->phy_interface;
- phy_intf_sel = stmmac_get_phy_intf_sel(interface);
+
+ /* Check whether this mode uses a PCS */
+ pcs = stmmac_mac_select_pcs(&priv->phylink_config, interface);
+ if (priv->integrated_pcs && pcs == &priv->integrated_pcs->pcs) {
+ /* Request the phy_intf_sel from the integrated PCS */
+ phy_intf_sel = stmmac_integrated_pcs_get_phy_intf_sel(pcs,
+ interface);
+ } else {
+ phy_intf_sel = stmmac_get_phy_intf_sel(interface);
+ }
+
if (phy_intf_sel < 0) {
netdev_err(priv->dev,
"failed to get phy_intf_sel for %s: %pe\n",
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c
index e827c03ae932..88fa359ea716 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c
@@ -81,6 +81,15 @@ void stmmac_integrated_pcs_irq(struct stmmac_priv *priv, u32 status,
}
}
+int stmmac_integrated_pcs_get_phy_intf_sel(struct phylink_pcs *pcs,
+ phy_interface_t interface)
+{
+ if (interface == PHY_INTERFACE_MODE_SGMII)
+ return PHY_INTF_SEL_SGMII;
+
+ return -EINVAL;
+}
+
int stmmac_integrated_pcs_init(struct stmmac_priv *priv, unsigned int offset,
u32 int_mask)
{
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
index 13ee5bd6c788..23bbd4f10bf8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
@@ -42,6 +42,8 @@ phylink_pcs_to_stmmac_pcs(struct phylink_pcs *pcs)
void stmmac_integrated_pcs_irq(struct stmmac_priv *priv, u32 status,
struct stmmac_extra_stats *x);
+int stmmac_integrated_pcs_get_phy_intf_sel(struct phylink_pcs *pcs,
+ phy_interface_t interface);
int stmmac_integrated_pcs_init(struct stmmac_priv *priv, unsigned int offset,
u32 int_mask);
--
2.47.3
next prev parent reply other threads:[~2026-01-30 11:10 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-30 11:10 [PATCH net-next 0/3] net: stmmac: pcs preparation Russell King (Oracle)
2026-01-30 11:10 ` [PATCH net-next 1/3] net: stmmac: clear half-duplex caps where unsupported Russell King (Oracle)
2026-01-30 17:29 ` Maxime Chevallier
2026-01-30 18:09 ` Russell King (Oracle)
2026-01-30 19:18 ` Maxime Chevallier
2026-01-30 11:10 ` [PATCH net-next 2/3] net: stmmac: move most PCS register definitions to stmmac_pcs.c Russell King (Oracle)
2026-01-30 11:10 ` Russell King (Oracle) [this message]
2026-01-31 16:37 ` [PATCH net-next 0/3] net: stmmac: pcs preparation Mohd Ayaan Anwar
2026-02-03 3:20 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1vlmOa-00000006zvB-1fIe@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox