public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
	Vinod Koul <vkoul@kernel.org>
Subject: [PATCH RFC net-next+ 1/9] net: stmmac: qcom-ethqos: convert to set_clk_tx_rate() method
Date: Thu, 19 Feb 2026 12:50:28 +0000	[thread overview]
Message-ID: <E1vt3UC-0000000A5dw-3lKw@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <aZcGxDBwfMXHbo_O@shell.armlinux.org.uk>

Set the RGMII link clock using the set_clk_tx_rate() method rather than
coding it into the .fix_mac_speed() method. This simplifies ethqos's
ethqos_fix_mac_speed().

Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 21 ++++++++++---------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 153f6abc77cd..ad5b5d950fff 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -103,7 +103,6 @@ struct qcom_ethqos {
 	void (*configure_func)(struct qcom_ethqos *ethqos,
 			       phy_interface_t interface, int speed);
 
-	unsigned int link_clk_rate;
 	struct clk *link_clk;
 	struct phy *serdes_phy;
 	int serdes_speed;
@@ -175,19 +174,20 @@ static void rgmii_dump(void *priv)
 		rgmii_readl(ethqos, EMAC_SYSTEM_LOW_POWER_DEBUG));
 }
 
-static void
-ethqos_update_link_clk(struct qcom_ethqos *ethqos, int speed)
+static int ethqos_set_clk_tx_rate(void *bsp_priv, struct clk *clk_tx_i,
+				  phy_interface_t interface, int speed)
 {
+	struct qcom_ethqos *ethqos = bsp_priv;
 	long rate;
 
-	if (!phy_interface_mode_is_rgmii(ethqos->phy_mode))
-		return;
+	if (!phy_interface_mode_is_rgmii(interface))
+		return 0;
 
 	rate = rgmii_clock(speed);
-	if (rate > 0)
-		ethqos->link_clk_rate = rate * 2;
+	if (rate < 0)
+		return rate;
 
-	clk_set_rate(ethqos->link_clk, ethqos->link_clk_rate);
+	return clk_set_rate(ethqos->link_clk, rate * 2);
 }
 
 static void
@@ -643,7 +643,6 @@ static void ethqos_fix_mac_speed(void *priv, phy_interface_t interface,
 {
 	struct qcom_ethqos *ethqos = priv;
 
-	ethqos_update_link_clk(ethqos, speed);
 	ethqos_configure(ethqos, interface, speed);
 }
 
@@ -821,12 +820,14 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 				     "Failed to get serdes phy\n");
 
 	ethqos->serdes_speed = SPEED_1000;
-	ethqos_update_link_clk(ethqos, SPEED_1000);
+	ethqos_set_clk_tx_rate(ethqos, NULL, plat_dat->phy_interface,
+			       SPEED_1000);
 
 	qcom_ethqos_set_sgmii_loopback(ethqos, true);
 	ethqos_set_func_clk_en(ethqos);
 
 	plat_dat->bsp_priv = ethqos;
+	plat_dat->set_clk_tx_rate = ethqos_set_clk_tx_rate;
 	plat_dat->fix_mac_speed = ethqos_fix_mac_speed;
 	plat_dat->dump_debug_regs = rgmii_dump;
 	plat_dat->ptp_clk_freq_config = ethqos_ptp_clk_freq_config;
-- 
2.47.3


  reply	other threads:[~2026-02-19 12:50 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-19 12:49 [PATCH RFC net-next+previous 0/9] net: stmmac: qcom-ethqos: further updates Russell King (Oracle)
2026-02-19 12:50 ` Russell King (Oracle) [this message]
2026-02-19 12:50 ` [PATCH RFC net-next+ 2/9] net: stmmac: qcom-ethqos: move ethqos_set_serdes_speed() Russell King (Oracle)
2026-02-23  9:52   ` Mohd Ayaan Anwar
2026-02-19 12:50 ` [PATCH RFC net-next+ 3/9] phy: qcom-sgmii-eth: add .set_mode() and .validate() methods Russell King (Oracle)
2026-02-19 12:50 ` [PATCH RFC net-next+ 4/9] net: stmmac: qcom-ethqos: convert to use phy_set_mode_ext() Russell King (Oracle)
2026-02-23  9:44   ` Mohd Ayaan Anwar
2026-02-19 12:50 ` [PATCH RFC net-next+ 5/9] phy: qcom-sgmii-eth: remove .set_speed() implementation Russell King (Oracle)
2026-02-19 12:50 ` [PATCH RFC net-next+ 6/9] phy: qcom-sgmii-eth: use PHY interface mode for SerDes settings Russell King (Oracle)
2026-02-19 12:50 ` [PATCH RFC net-next+ 7/9] phy: qcom-sgmii-eth: remove qcom_dwmac_sgmii_phy_interface() Russell King (Oracle)
2026-02-19 12:51 ` [PATCH RFC net-next+ 8/9] phy: qcom-sgmii-eth: relax order of .power_on() vs .set_mode*() Russell King (Oracle)
2026-02-19 12:51 ` [PATCH RFC net-next+ 9/9] net: stmmac: qcom-ethqos: remove phy_set_mode_ext() after phy_power_on() Russell King (Oracle)
2026-02-23  9:54   ` Mohd Ayaan Anwar
2026-02-23  9:49 ` [PATCH RFC net-next+previous 0/9] net: stmmac: qcom-ethqos: further updates Mohd Ayaan Anwar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1vt3UC-0000000A5dw-3lKw@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mohd.anwar@oss.qualcomm.com \
    --cc=neil.armstrong@linaro.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox