public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
	Vinod Koul <vkoul@kernel.org>
Subject: [PATCH RFC net-next+ 9/9] net: stmmac: qcom-ethqos: remove phy_set_mode_ext() after phy_power_on()
Date: Thu, 19 Feb 2026 12:51:10 +0000	[thread overview]
Message-ID: <E1vt3Us-0000000A5ei-04Bg@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <aZcGxDBwfMXHbo_O@shell.armlinux.org.uk>

The call to phy_set_mode_ext() after phy_power_on() was a work-around
for the qcom-sgmii-eth SerDes driver that only re-enabled its clocks on
phy_power_on() but did not configure the PHY. Now that the SerDes driver
fully configures the SerDes at phy_power_on(), there is no need to call
phy_set_mode_ext() immediately afterwards.

This also means we no longer need to record the previous operating mode
of the driver - this is up to the SerDes driver. In any case, the only
thing that we care about is the SerDes provides the necessary clocks to
the stmmac core to allow it to reset at this point. The actual mode is
irrelevant at this point as the correct mode will be configured in
ethqos_mac_finish_serdes() just before the network device is brought
online.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c         | 18 ++----------------
 1 file changed, 2 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 65316c603cae..20d0d113965d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -105,7 +105,6 @@ struct qcom_ethqos {
 
 	struct clk *link_clk;
 	struct phy *serdes_phy;
-	phy_interface_t serdes_mode;
 	phy_interface_t phy_mode;
 
 	const struct ethqos_emac_por *rgmii_por;
@@ -648,17 +647,8 @@ static int qcom_ethqos_serdes_powerup(struct net_device *ndev, void *priv)
 		return ret;
 
 	ret = phy_power_on(ethqos->serdes_phy);
-	if (ret) {
-		phy_exit(ethqos->serdes_phy);
-		return ret;
-	}
-
-	ret = phy_set_mode(ethqos->serdes_phy, PHY_MODE_ETHERNET,
-			   ethqos->serdes_mode);
-	if (ret) {
-		phy_power_off(ethqos->serdes_phy);
+	if (ret)
 		phy_exit(ethqos->serdes_phy);
-	}
 
 	return ret;
 }
@@ -681,12 +671,9 @@ static int ethqos_mac_finish_serdes(struct net_device *ndev, void *priv,
 	qcom_ethqos_set_sgmii_loopback(ethqos, false);
 
 	if (interface == PHY_INTERFACE_MODE_SGMII ||
-	    interface == PHY_INTERFACE_MODE_2500BASEX) {
+	    interface == PHY_INTERFACE_MODE_2500BASEX)
 		ret = phy_set_mode(ethqos->serdes_phy, PHY_MODE_ETHERNET,
 				   interface);
-		if (ret == 0)
-			ethqos->serdes_mode = interface;
-	}
 
 	return ret;
 }
@@ -839,7 +826,6 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 		plat_dat->host_dma_width = data->dma_addr_width;
 
 	if (ethqos->serdes_phy) {
-		ethqos->serdes_mode = PHY_INTERFACE_MODE_SGMII;
 		plat_dat->serdes_powerup = qcom_ethqos_serdes_powerup;
 		plat_dat->serdes_powerdown  = qcom_ethqos_serdes_powerdown;
 	}
-- 
2.47.3


  parent reply	other threads:[~2026-02-19 12:51 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-19 12:49 [PATCH RFC net-next+previous 0/9] net: stmmac: qcom-ethqos: further updates Russell King (Oracle)
2026-02-19 12:50 ` [PATCH RFC net-next+ 1/9] net: stmmac: qcom-ethqos: convert to set_clk_tx_rate() method Russell King (Oracle)
2026-02-19 12:50 ` [PATCH RFC net-next+ 2/9] net: stmmac: qcom-ethqos: move ethqos_set_serdes_speed() Russell King (Oracle)
2026-02-23  9:52   ` Mohd Ayaan Anwar
2026-02-19 12:50 ` [PATCH RFC net-next+ 3/9] phy: qcom-sgmii-eth: add .set_mode() and .validate() methods Russell King (Oracle)
2026-02-19 12:50 ` [PATCH RFC net-next+ 4/9] net: stmmac: qcom-ethqos: convert to use phy_set_mode_ext() Russell King (Oracle)
2026-02-23  9:44   ` Mohd Ayaan Anwar
2026-02-19 12:50 ` [PATCH RFC net-next+ 5/9] phy: qcom-sgmii-eth: remove .set_speed() implementation Russell King (Oracle)
2026-02-19 12:50 ` [PATCH RFC net-next+ 6/9] phy: qcom-sgmii-eth: use PHY interface mode for SerDes settings Russell King (Oracle)
2026-02-19 12:50 ` [PATCH RFC net-next+ 7/9] phy: qcom-sgmii-eth: remove qcom_dwmac_sgmii_phy_interface() Russell King (Oracle)
2026-02-19 12:51 ` [PATCH RFC net-next+ 8/9] phy: qcom-sgmii-eth: relax order of .power_on() vs .set_mode*() Russell King (Oracle)
2026-02-19 12:51 ` Russell King (Oracle) [this message]
2026-02-23  9:54   ` [PATCH RFC net-next+ 9/9] net: stmmac: qcom-ethqos: remove phy_set_mode_ext() after phy_power_on() Mohd Ayaan Anwar
2026-02-23  9:49 ` [PATCH RFC net-next+previous 0/9] net: stmmac: qcom-ethqos: further updates Mohd Ayaan Anwar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1vt3Us-0000000A5ei-04Bg@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mohd.anwar@oss.qualcomm.com \
    --cc=neil.armstrong@linaro.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox