public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Alexei Starovoitov <ast@kernel.org>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	bpf@vger.kernel.org, Daniel Borkmann <daniel@iogearbox.net>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Jesper Dangaard Brouer <hawk@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com, netdev@vger.kernel.org,
	Paolo Abeni <pabeni@redhat.com>,
	Stanislav Fomichev <sdf@fomichev.me>
Subject: [PATCH net-next v2 09/15] net: stmmac: add helper to set receive buffer size
Date: Thu, 12 Mar 2026 10:09:33 +0000	[thread overview]
Message-ID: <E1w0cyz-0000000CzGf-3K08@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <abKQWloxp9_4OuJh@shell.armlinux.org.uk>

There are three sites that configure the hardware for the receive
buffer size using the same logic to determine the buffer size.
Add a helper so there is only one copy of this code.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 54 ++++++++-----------
 1 file changed, 21 insertions(+), 33 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 787b02c2607a..47b536c15c0e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -393,6 +393,24 @@ static void stmmac_set_queue_rx_tail_ptr(struct stmmac_priv *priv,
 	stmmac_set_rx_tail_ptr(priv, priv->ioaddr, rx_tail_addr, chan);
 }
 
+static void stmmac_set_queue_rx_buf_size(struct stmmac_priv *priv,
+					 struct stmmac_rx_queue *rx_q,
+					 unsigned int chan)
+{
+	u32 buf_size;
+
+	if (rx_q->xsk_pool && rx_q->buf_alloc_num) {
+		buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
+		stmmac_set_dma_bfsize(priv, priv->ioaddr,
+				      buf_size,
+				      rx_q->queue_index);
+	} else {
+		stmmac_set_dma_bfsize(priv, priv->ioaddr,
+				      priv->dma_conf.dma_buf_sz,
+				      rx_q->queue_index);
+	}
+}
+
 /**
  * stmmac_rx_dirty - Get RX queue dirty
  * @priv: driver private structure
@@ -2605,23 +2623,13 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
 	/* configure all channels */
 	for (chan = 0; chan < rx_channels_count; chan++) {
 		struct stmmac_rx_queue *rx_q = &priv->dma_conf.rx_queue[chan];
-		u32 buf_size;
 
 		qmode = priv->plat->rx_queues_cfg[chan].mode_to_use;
 
 		stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan,
 				rxfifosz, qmode);
 
-		if (rx_q->xsk_pool && rx_q->buf_alloc_num) {
-			buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
-			stmmac_set_dma_bfsize(priv, priv->ioaddr,
-					      buf_size,
-					      chan);
-		} else {
-			stmmac_set_dma_bfsize(priv, priv->ioaddr,
-					      priv->dma_conf.dma_buf_sz,
-					      chan);
-		}
+		stmmac_set_queue_rx_buf_size(priv, rx_q, chan);
 	}
 
 	for (chan = 0; chan < tx_channels_count; chan++) {
@@ -6935,7 +6943,6 @@ void stmmac_enable_rx_queue(struct stmmac_priv *priv, u32 queue)
 	struct stmmac_rx_queue *rx_q = &priv->dma_conf.rx_queue[queue];
 	struct stmmac_channel *ch = &priv->channel[queue];
 	unsigned long flags;
-	u32 buf_size;
 	int ret;
 
 	ret = __alloc_dma_rx_desc_resources(priv, &priv->dma_conf, queue);
@@ -6960,16 +6967,7 @@ void stmmac_enable_rx_queue(struct stmmac_priv *priv, u32 queue)
 	stmmac_set_queue_rx_tail_ptr(priv, rx_q, rx_q->queue_index,
 				     rx_q->buf_alloc_num);
 
-	if (rx_q->xsk_pool && rx_q->buf_alloc_num) {
-		buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
-		stmmac_set_dma_bfsize(priv, priv->ioaddr,
-				      buf_size,
-				      rx_q->queue_index);
-	} else {
-		stmmac_set_dma_bfsize(priv, priv->ioaddr,
-				      priv->dma_conf.dma_buf_sz,
-				      rx_q->queue_index);
-	}
+	stmmac_set_queue_rx_buf_size(priv, rx_q, rx_q->queue_index);
 
 	stmmac_start_rx_dma(priv, queue);
 
@@ -7072,7 +7070,6 @@ int stmmac_xdp_open(struct net_device *dev)
 	u8 dma_csr_ch = max(rx_cnt, tx_cnt);
 	struct stmmac_rx_queue *rx_q;
 	struct stmmac_tx_queue *tx_q;
-	u32 buf_size;
 	bool sph_en;
 	u8 chan;
 	int ret;
@@ -7112,16 +7109,7 @@ int stmmac_xdp_open(struct net_device *dev)
 		stmmac_set_queue_rx_tail_ptr(priv, rx_q, chan,
 					     rx_q->buf_alloc_num);
 
-		if (rx_q->xsk_pool && rx_q->buf_alloc_num) {
-			buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
-			stmmac_set_dma_bfsize(priv, priv->ioaddr,
-					      buf_size,
-					      rx_q->queue_index);
-		} else {
-			stmmac_set_dma_bfsize(priv, priv->ioaddr,
-					      priv->dma_conf.dma_buf_sz,
-					      rx_q->queue_index);
-		}
+		stmmac_set_queue_rx_buf_size(priv, rx_q, chan);
 
 		stmmac_enable_sph(priv, priv->ioaddr, sph_en, chan);
 	}
-- 
2.47.3


  parent reply	other threads:[~2026-03-12 10:09 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-12 10:07 [PATCH net-next v2 00/15] net: stmmac: clean up descriptor handling part 1 Russell King (Oracle)
2026-03-12 10:08 ` [PATCH net-next v2 01/15] net: stmmac: rearrange stmmac_tx_info members to pack better Russell King (Oracle)
2026-03-12 10:08 ` [PATCH net-next v2 02/15] net: stmmac: helpers for filling tx_q->tx_skbuff_dma Russell King (Oracle)
2026-03-12 10:09 ` [PATCH net-next v2 03/15] net: stmmac: clean up stmmac_clear_rx_descriptors() Russell King (Oracle)
2026-03-12 10:09 ` [PATCH net-next v2 04/15] net: stmmac: add helper to get hardware receive descriptor Russell King (Oracle)
2026-03-12 10:09 ` [PATCH net-next v2 05/15] net: stmmac: add helper to get size of a " Russell King (Oracle)
2026-03-12 10:09 ` [PATCH net-next v2 06/15] net: stmmac: add helper to set receive tail pointer Russell King (Oracle)
2026-03-12 10:09 ` [PATCH net-next v2 07/15] net: stmmac: remove rx_tail_addr Russell King (Oracle)
2026-03-12 10:09 ` [PATCH net-next v2 08/15] net: stmmac: use consistent tests for receive buffer size Russell King (Oracle)
2026-03-12 10:09 ` Russell King (Oracle) [this message]
2026-03-12 10:09 ` [PATCH net-next v2 10/15] net: stmmac: simplify stmmac_set_queue_rx_buf_size() Russell King (Oracle)
2026-03-12 10:09 ` [PATCH net-next v2 11/15] net: stmmac: add helper to get hardware transmit descriptor Russell King (Oracle)
2026-03-12 10:09 ` [PATCH net-next v2 12/15] net: stmmac: add helper to get size of a " Russell King (Oracle)
2026-03-12 10:09 ` [PATCH net-next v2 13/15] net: stmmac: add helper to set transmit tail pointer Russell King (Oracle)
2026-03-12 12:34   ` Russell King (Oracle)
2026-03-13 19:50   ` kernel test robot
2026-03-13 20:10   ` kernel test robot
2026-03-12 10:09 ` [PATCH net-next v2 14/15] net: stmmac: remove tx_tail_addr Russell King (Oracle)
2026-03-12 10:10 ` [PATCH net-next v2 15/15] net: stmmac: use queue rather than ->queue_index Russell King (Oracle)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1w0cyz-0000000CzGf-3K08@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hawk@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=sdf@fomichev.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox