public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Alexei Starovoitov <ast@kernel.org>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	bpf@vger.kernel.org, Daniel Borkmann <daniel@iogearbox.net>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Jesper Dangaard Brouer <hawk@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com, netdev@vger.kernel.org,
	Paolo Abeni <pabeni@redhat.com>,
	Stanislav Fomichev <sdf@fomichev.me>
Subject: [PATCH net-next v4 15/15] net: stmmac: use queue rather than ->queue_index
Date: Sat, 14 Mar 2026 09:43:36 +0000	[thread overview]
Message-ID: <E1w1LWy-0000000DGT8-2Hoc@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <abUtGH9KB03PH5Ne@shell.armlinux.org.uk>

We use a lot of ->queue_index where we already have the queue / channel
index (which are actually the same index), which has been used to get
the queue struct. Since queue and queue_index are identical in
priv->(tx|rx)_queue[queue]->queue_index there is no point using the
queue_index where we already have queue.

Use queue rather than queue_index.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 25 ++++++++-----------
 1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 55b79e9e637f..8393cbd0875e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -440,7 +440,7 @@ static void stmmac_set_queue_rx_buf_size(struct stmmac_priv *priv,
 	else
 		buf_size = priv->dma_conf.dma_buf_sz;
 
-	stmmac_set_dma_bfsize(priv, priv->ioaddr, buf_size, rx_q->queue_index);
+	stmmac_set_dma_bfsize(priv, priv->ioaddr, buf_size, chan);
 }
 
 /**
@@ -1902,7 +1902,7 @@ static int __init_dma_rx_desc_rings(struct stmmac_priv *priv,
 						   NULL));
 		netdev_info(priv->dev,
 			    "Register MEM_TYPE_XSK_BUFF_POOL RxQ-%d\n",
-			    rx_q->queue_index);
+			    queue);
 		xsk_pool_set_rxq_info(rx_q->xsk_pool, &rx_q->xdp_rxq);
 	} else {
 		WARN_ON(xdp_rxq_info_reg_mem_model(&rx_q->xdp_rxq,
@@ -1910,7 +1910,7 @@ static int __init_dma_rx_desc_rings(struct stmmac_priv *priv,
 						   rx_q->page_pool));
 		netdev_info(priv->dev,
 			    "Register MEM_TYPE_PAGE_POOL RxQ-%d\n",
-			    rx_q->queue_index);
+			    queue);
 	}
 
 	if (rx_q->xsk_pool) {
@@ -2310,9 +2310,7 @@ static int __alloc_dma_rx_desc_resources(struct stmmac_priv *priv,
 	else
 		napi_id = ch->rx_napi.napi_id;
 
-	ret = xdp_rxq_info_reg(&rx_q->xdp_rxq, priv->dev,
-			       rx_q->queue_index,
-			       napi_id);
+	ret = xdp_rxq_info_reg(&rx_q->xdp_rxq, priv->dev, queue, napi_id);
 	if (ret) {
 		netdev_err(priv->dev, "Failed to register xdp rxq info\n");
 		return -EINVAL;
@@ -3340,7 +3338,7 @@ static void stmmac_tx_timer_arm(struct stmmac_priv *priv, u32 queue)
 	if (!tx_coal_timer)
 		return;
 
-	ch = &priv->channel[tx_q->queue_index];
+	ch = &priv->channel[queue];
 	napi = tx_q->xsk_pool ? &ch->rxtx_napi : &ch->tx_napi;
 
 	/* Arm timer only if napi is not already scheduled.
@@ -6918,12 +6916,11 @@ void stmmac_enable_rx_queue(struct stmmac_priv *priv, u32 queue)
 	stmmac_clear_rx_descriptors(priv, &priv->dma_conf, queue);
 
 	stmmac_init_rx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
-			    rx_q->dma_rx_phy, rx_q->queue_index);
+			    rx_q->dma_rx_phy, queue);
 
-	stmmac_set_queue_rx_tail_ptr(priv, rx_q, rx_q->queue_index,
-				     rx_q->buf_alloc_num);
+	stmmac_set_queue_rx_tail_ptr(priv, rx_q, queue, rx_q->buf_alloc_num);
 
-	stmmac_set_queue_rx_buf_size(priv, rx_q, rx_q->queue_index);
+	stmmac_set_queue_rx_buf_size(priv, rx_q, queue);
 
 	stmmac_start_rx_dma(priv, queue);
 
@@ -6969,12 +6966,12 @@ void stmmac_enable_tx_queue(struct stmmac_priv *priv, u32 queue)
 	stmmac_clear_tx_descriptors(priv, &priv->dma_conf, queue);
 
 	stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
-			    tx_q->dma_tx_phy, tx_q->queue_index);
+			    tx_q->dma_tx_phy, queue);
 
 	if (tx_q->tbs & STMMAC_TBS_AVAIL)
-		stmmac_enable_tbs(priv, priv->ioaddr, 1, tx_q->queue_index);
+		stmmac_enable_tbs(priv, priv->ioaddr, 1, queue);
 
-	stmmac_set_queue_tx_tail_ptr(priv, tx_q, tx_q->queue_index, 0);
+	stmmac_set_queue_tx_tail_ptr(priv, tx_q, queue, 0);
 
 	stmmac_start_tx_dma(priv, queue);
 
-- 
2.47.3


  parent reply	other threads:[~2026-03-14  9:49 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-14  9:40 [PATCH net-next v4 00/15] net: stmmac: clean up descriptor handling part 1 Russell King (Oracle)
2026-03-14  9:42 ` [PATCH net-next v4 01/15] net: stmmac: rearrange stmmac_tx_info members to pack better Russell King (Oracle)
2026-03-14  9:42 ` [PATCH net-next v4 02/15] net: stmmac: helpers for filling tx_q->tx_skbuff_dma Russell King (Oracle)
2026-03-14  9:42 ` [PATCH net-next v4 03/15] net: stmmac: clean up stmmac_clear_rx_descriptors() Russell King (Oracle)
2026-03-14  9:42 ` [PATCH net-next v4 04/15] net: stmmac: add helper to get hardware receive descriptor Russell King (Oracle)
2026-03-14  9:42 ` [PATCH net-next v4 05/15] net: stmmac: add helper to get size of a " Russell King (Oracle)
2026-03-14  9:42 ` [PATCH net-next v4 06/15] net: stmmac: add helper to set receive tail pointer Russell King (Oracle)
2026-03-14  9:42 ` [PATCH net-next v4 07/15] net: stmmac: remove rx_tail_addr Russell King (Oracle)
2026-03-14  9:43 ` [PATCH net-next v4 08/15] net: stmmac: use consistent tests for receive buffer size Russell King (Oracle)
2026-03-14  9:43 ` [PATCH net-next v4 09/15] net: stmmac: add helper to set " Russell King (Oracle)
2026-03-14  9:43 ` [PATCH net-next v4 10/15] net: stmmac: simplify stmmac_set_queue_rx_buf_size() Russell King (Oracle)
2026-03-14  9:43 ` [PATCH net-next v4 11/15] net: stmmac: add helper to get hardware transmit descriptor Russell King (Oracle)
2026-03-14  9:43 ` [PATCH net-next v4 12/15] net: stmmac: add helper to get size of a " Russell King (Oracle)
2026-03-14  9:43 ` [PATCH net-next v4 13/15] net: stmmac: add helper to set transmit tail pointer Russell King (Oracle)
2026-03-14  9:43 ` [PATCH net-next v4 14/15] net: stmmac: remove tx_tail_addr Russell King (Oracle)
2026-03-14  9:43 ` Russell King (Oracle) [this message]
2026-03-18  3:40 ` [PATCH net-next v4 00/15] net: stmmac: clean up descriptor handling part 1 patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1w1LWy-0000000DGT8-2Hoc@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hawk@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=sdf@fomichev.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox