[PATCH net-next v2 maybe? 1/5] net: stmmac: move default_an_inband to plat_stmmacenet_data

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

Move the default_an_inband flag from struct mdio_bus_data to struct
plat_stmmacenet_data. This is to allow platforms that do not use the
integrated MDIO bus to enable inband mode.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 4 ++--
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +----
 include/linux/stmmac.h                            | 2 +-
 3 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index f621077c30a4..7898b5075a8b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -298,7 +298,7 @@ static void tgl_get_interfaces(struct stmmac_priv *priv, void *bsp_priv,
 
 	if (FIELD_GET(SERDES_LINK_MODE_MASK, data) == SERDES_LINK_MODE_2G5) {
 		dev_info(priv->device, "Link Speed Mode: 2.5Gbps\n");
-		priv->plat->mdio_bus_data->default_an_inband = false;
+		priv->plat->default_an_inband = false;
 		interface = PHY_INTERFACE_MODE_2500BASEX;
 	} else {
 		interface = PHY_INTERFACE_MODE_SGMII;
@@ -700,7 +700,7 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
 	if (plat->phy_interface == PHY_INTERFACE_MODE_SGMII ||
 	    plat->phy_interface == PHY_INTERFACE_MODE_1000BASEX) {
 		plat->mdio_bus_data->pcs_mask = BIT_U32(INTEL_MGBE_XPCS_ADDR);
-		plat->mdio_bus_data->default_an_inband = true;
+		plat->default_an_inband = true;
 		plat->select_pcs = intel_mgbe_select_pcs;
 	}
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0a933aac3f03..90af7212b8d8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1390,7 +1390,6 @@ static int stmmac_init_phy(struct net_device *dev)
 
 static int stmmac_phylink_setup(struct stmmac_priv *priv)
 {
-	struct stmmac_mdio_bus_data *mdio_bus_data;
 	struct phylink_config *config;
 	struct phylink_pcs *pcs;
 	struct phylink *phylink;
@@ -1415,9 +1414,7 @@ static int stmmac_phylink_setup(struct stmmac_priv *priv)
 	priv->tx_lpi_clk_stop = priv->plat->flags &
 				STMMAC_FLAG_EN_TX_LPI_CLOCKGATING;
 
-	mdio_bus_data = priv->plat->mdio_bus_data;
-	if (mdio_bus_data)
-		config->default_an_inband = mdio_bus_data->default_an_inband;
+	config->default_an_inband = priv->plat->default_an_inband;
 
 	/* Get the PHY interface modes (at the PHY end of the link) that
 	 * are supported by the platform.
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 72febd246bdb..565bb394b194 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -89,7 +89,6 @@ struct stmmac_mdio_bus_data {
 	int *irqs;
 	int probed_phy_irq;
 	bool needs_reset;
-	bool default_an_inband;
 };
 
 struct stmmac_dma_cfg {
@@ -250,6 +249,7 @@ struct plat_stmmacenet_data {
 	struct stmmac_dma_cfg *dma_cfg;
 	struct stmmac_safety_feature_cfg *safety_feat_cfg;
 	int clk_csr;
+	bool default_an_inband;
 	bool enh_desc;
 	bool tx_coe;
 	bool bugged_jumbo;
-- 
2.47.3