netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* 3C905 + options=0x8
@ 2003-10-20 11:25 Marco Berizzi
  2003-10-20 15:37 ` Donald Becker
  0 siblings, 1 reply; 3+ messages in thread
From: Marco Berizzi @ 2003-10-20 11:25 UTC (permalink / raw)
  To: netdev

Hello.
I have found a strange 3C905 behaviour on linux 2.4.22 (same behaviuor
with 2.4.19 and 2.6.0-test7).
When the linux box load the module with /etc/modules.conf containing:
options 3c59x options=0x8,0x8

the 3C905 NICs don't receive/send packet. 3C905B NIC is working good.
Here is the output from mii-diag:

mii-diag.c:v2.09 9/06/2003 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
  Using the new SIOCGMIIPHY value on PHY 24 (BMCR 0x3100).
 The autonegotiated capability is 01e0.
The autonegotiated media type is 100baseTx-FD.
 Basic mode control register 0x3100: Auto-negotiation enabled.
 Basic mode status register 0x786f ... 786f.
   Link status: established.
   This transceiver is capable of  100baseTx-FD 100baseTx 10baseT-FD
10baseT.
   Able to perform Auto-negotiation, negotiation complete.
   *** Link Jabber! ***
 Your link partner advertised 45e1: Flow-control 100baseTx-FD 100baseTx
10baseT-FD 10baseT, w/ 802.3X flow control.
   End of basic transceiver information.

 MII PHY #24 transceiver registers:
   3100 786f 2000 5c01 01e1 45e1 0001 0000
   0000 0000 0000 0000 0000 0000 0000 0000
   0000 0000 0000 0000 0000 0000 0001 8060
   8020 0cb8 0000 1800 a3b9 005d 0c05 001d

Here is the output from vortex-diag

vortex-diag.c:v2.14 12/28/2002 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a 3c905 Boomerang 100baseTx adapter at 0xe400.
 Station address 00:60:97:d8:e5:01.
  Receive mode is 0x00: Unknown/invalid.
 MII PHY found at address 24, status 786f.
 MII PHY 0 at #24 transceiver registers:
   3100 786f 2000 5c01 01e1 45e1 0001 0000
   0000 0000 0000 0000 0000 0000 0000 0000
   0000 0000 0000 0000 0000 0000 0001 8060
   8020 0cb8 0000 1800 a3b9 0063 5005 001d.
vortex-diag.c:v2.14 12/28/2002 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a 3c905 Boomerang 100baseTx adapter at 0xe400.
 Station address 00:60:97:d8:e5:01.
  Receive mode is 0x00: Unknown/invalid.
Initial window 4, registers values by window:
  Window 0: 0000 0000 0000 0000 0000 00bf ffff 0000.
  Window 1: 0000 0000 0000 2000 8000 00ff 13fc 2000.
  Window 2: 6000 d897 01e5 0000 0000 0000 0000 4000.
  Window 3: 02d8 0163 0000 0000 e040 0bff 13ff 6000.
  Window 4: 0000 06d0 2000 0000 0003 8802 0000 8000.
  Window 5: 1ffc fffc 0000 1ffc 0000 0000 0000 a000.
  Window 6: 0000 0000 0000 0000 0000 0000 0000 c000.
  Window 7: 0000 0000 0000 0000 8000 00ff 0000 e000.
Vortex chip registers at 0xe400
  0xE410: 00800000 00000000 00008000 000013fc
  0xE420: 00000000 00000000 00000000 ff000000
  0xE430: 00000000 0000f7fb 00000000 00000000
 Indication enable is 0000, interrupt enable is 0000.
 No interrupt sources are pending.
 Transceiver/media interfaces available:  MII.
Transceiver type in use:  MII.
 MAC settings: half-duplex.
Maximum packet size is 0.
 Station address set to 00:60:97:d8:e5:01.
 Configuration options 0000.
vortex-diag.c:v2.14 12/28/2002 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a 3c905 Boomerang 100baseTx adapter at 0xe400.
 Station address 00:60:97:d8:e5:01.
  Receive mode is 0x00: Unknown/invalid.
EEPROM format 64x16, configuration table at offset 0:
    00: 0060 97d8 e501 9050 c29c 0036 4848 6d50
  0x08: 0418 0001 0060 97d8 e501 0020 0000 0000
  0x10: 10a6 0000 02d8 0163 0000 0002 0000 00a4
  0x18: ffff ffff ffff ffff ffff ffff ffff ffff
      ...

 The word-wide EEPROM checksum is 0x1ce4.
Saved EEPROM settings of a 3Com Vortex/Boomerang:
 3Com Node Address 00:60:97:D8:E5:01 (used as a unique ID only).
 OEM Station address 00:60:97:D8:E5:01 (used as the ethernet address).
  Device ID 9050,  Manufacturer ID 6d50.
  Manufacture date (MM/DD/YYYY) 4/28/1997, division 6, product HH.
  No BIOS ROM is present.
 Transceiver selection: MII.
   Options: negotiated duplex, link beat required.
 PCI Subsystem IDs: Vendor 00a4 Device ffff.
 100baseT4 100baseTx 100baseFx 10baseT 10base2 AUI MII .
  Vortex format checksum is correct (a4 vs. a4).
  Cyclone format checksum is incorrect (00 vs. 0xff).
  Hurricane format checksum is incorrect (00 vs. 0xff).

Could you help me?

Please cc me, I'm not subscribed to the list.

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: 3C905 + options=0x8
  2003-10-20 11:25 3C905 + options=0x8 Marco Berizzi
@ 2003-10-20 15:37 ` Donald Becker
  2003-10-21  8:54   ` Marco Berizzi
  0 siblings, 1 reply; 3+ messages in thread
From: Donald Becker @ 2003-10-20 15:37 UTC (permalink / raw)
  To: Marco Berizzi; +Cc: netdev

On Mon, 20 Oct 2003, Marco Berizzi wrote:

> I have found a strange 3C905 behaviour on linux 2.4.22 (same behaviuor
> with 2.4.19 and 2.6.0-test7).
> When the linux box load the module with /etc/modules.conf containing:
> options 3c59x options=0x8,0x8

Baseline: what do you expect this option setting to do when used with
the 3c905_ (no suffix)?

Note that the 3c905 has an external MII transceiver (trasceiver type 6),
while the 3c905B and 3c905C have on-chip transceivers (transceiver type 8). 

> the 3C905 NICs don't receive/send packet. 3C905B NIC is working good.

I would say that the driver is working as you directed it to.

You should not set driver options unless you have a non-standard
configuration.  Setting driver options "just to make sure" is a common
source of problems.

I suspect that just removing the module options will restore correct
operation.

-- 
Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
914 Bay Ridge Road, Suite 220		Scyld Beowulf cluster system
Annapolis MD 21403			410-990-9993

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: 3C905 + options=0x8
  2003-10-20 15:37 ` Donald Becker
@ 2003-10-21  8:54   ` Marco Berizzi
  0 siblings, 0 replies; 3+ messages in thread
From: Marco Berizzi @ 2003-10-21  8:54 UTC (permalink / raw)
  To: Donald Becker; +Cc: netdev


Donald Becker wrote:

> Baseline: what do you expect this option setting to do when used with
> the 3c905_ (no suffix)?

As you wrote: "...just to make sure..." ;-))

> Note that the 3c905 has an external MII transceiver (trasceiver type
6),
> while the 3c905B and 3c905C have on-chip transceivers (transceiver
type 8).

FYI: With a 3c905:
modprobe 3c59x options=0x8
rmmod 3c59x
modprobe 3c59x options=0x6 doesn't work anyway until I reboot the linux
box.

> You should not set driver options unless you have a non-standard
> configuration.  Setting driver options "just to make sure" is a common
> source of problems.

Ok.

> I suspect that just removing the module options will restore correct
> operation.

Yes it work when I remove the module options.

modprobe 3c59x options=0x6,0x6,0x8 (the linux box contains 3 NICs, two
3C905 and one 3C905B) sometimes I get this error when I switch the eth0
cable from a 10MBit/s HUB to a cross cable (to connect directly to
another system 100MBit/s FD):

Output from mii-diag:

mii-diag.c:v2.09 9/06/2003 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
  Using the new SIOCGMIIPHY value on PHY 24 (BMCR 0x3100).
 The autonegotiated capability is 01e0.
The autonegotiated media type is 100baseTx-FD.
 Basic mode control register 0x3100: Auto-negotiation enabled.
 Basic mode status register 0x786f ... 786f.
   Link status: established.
   This transceiver is capable of  100baseTx-FD 100baseTx 10baseT-FD
10baseT.
   Able to perform Auto-negotiation, negotiation complete.
   *** Link Jabber! ***
 Your link partner advertised 45e1: Flow-control 100baseTx-FD 100baseTx
10baseT-FD 10baseT, w/ 802.3X flow control.
   End of basic transceiver information.

 MII PHY #24 transceiver registers:
   3100 786f 2000 5c01 01e1 45e1 0001 0000
   0000 0000 0000 0000 0000 0000 0000 0000
   0000 0000 0000 0000 0000 0000 0001 8060
   8020 0cb8 0000 1800 a3b9 005e 1f05 001d

Output from dmesg:

  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
eth0: Resetting the Tx ring pointer.
eth0: Transmit error, Tx status register 90.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 06f5b280 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
  diagnostics: net 0cc0 media 8802 dma 00000020.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 00000000 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
eth0: Resetting the Tx ring pointer.
eth0: Transmit error, Tx status register 90.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 06f5b280 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
  diagnostics: net 0cc0 media 8802 dma 00000020.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 00000000 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
eth0: Resetting the Tx ring pointer.
eth0: Transmit error, Tx status register 90.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 06f5b280 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
  diagnostics: net 0cc0 media 8802 dma 00000020.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 00000000 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
eth0: Resetting the Tx ring pointer.
eth0: Transmit error, Tx status register 90.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 06f5b280 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
  diagnostics: net 0cc0 media 8802 dma 00000020.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 00000000 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
eth0: Resetting the Tx ring pointer.
eth0: Transmit error, Tx status register 90.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 06f5b280 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
  diagnostics: net 0cc0 media 8802 dma 00000020.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 00000000 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
eth0: Resetting the Tx ring pointer.
eth0: Transmit error, Tx status register 90.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 06f5b280 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
  diagnostics: net 0cc0 media 8802 dma 00000020.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 00000000 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
eth0: Resetting the Tx ring pointer.
eth0: Transmit error, Tx status register 90.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 06f5b280 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
  diagnostics: net 0cc0 media 8802 dma 00000020.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 00000000 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
eth0: Resetting the Tx ring pointer.
eth0: Transmit error, Tx status register 90.
  Flags; bus-master 1, dirty 1(1) current 17(1)
  Transmit list 06f5b280 vs. c6f5b240.
  0: @c6f5b200  length 8000002a status 8000002a
  1: @c6f5b240  length 8000002a status 0000002a
  2: @c6f5b280  length 8000002a status 0000002a
  3: @c6f5b2c0  length 8000002a status 0000002a
  4: @c6f5b300  length 8000002a status 0000002a
  5: @c6f5b340  length 8000002a status 0000002a
  6: @c6f5b380  length 8000002a status 0000002a
  7: @c6f5b3c0  length 8000002a status 0000002a
  8: @c6f5b400  length 8000002a status 0000002a
  9: @c6f5b440  length 8000002a status 0000002a
  10: @c6f5b480  length 8000002a status 0000002a
  11: @c6f5b4c0  length 8000002a status 0000002a
  12: @c6f5b500  length 8000002a status 0000002a
  13: @c6f5b540  length 8000002a status 0000002a
  14: @c6f5b580  length 8000002a status 0000002a
  15: @c6f5b5c0  length 8000002a status 8000002a
eth0: Host error, FIFO diagnostic register 2000.
eth0: PCI bus error, bus status 00a00021
eth0: Media override to transceiver 6 (MII).
eth0: Host error, FIFO diagnostic register 2000.
eth0: PCI bus error, bus status 00000000
eth0: Media override to transceiver 6 (MII).
eth0: Host error, FIFO diagnostic register 2000.
eth0: PCI bus error, bus status 00000000
eth0: Media override to transceiver 6 (MII).
eth1: Host error, FIFO diagnostic register 2000.
eth1: PCI bus error, bus status 00000020
eth1: Media override to transceiver 6 (MII).
eth1: Host error, FIFO diagnostic register 2000.
eth1: PCI bus error, bus status 00000000
eth1: Media override to transceiver 6 (MII).

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2003-10-21  8:54 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-10-20 11:25 3C905 + options=0x8 Marco Berizzi
2003-10-20 15:37 ` Donald Becker
2003-10-21  8:54   ` Marco Berizzi

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).