From: Martin Habets <habetsm.xilinx@gmail.com>
To: alejandro.lucero-palau@amd.com
Cc: netdev@vger.kernel.org, linux-net-drivers@amd.com,
davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
edumazet@google.com, ecree.xilinx@gmail.com,
linux-doc@vger.kernel.org, corbet@lwn.net, jiri@nvidia.com
Subject: Re: [PATCH v6 net-next 4/8] sfc: add mport lookup based on driver's mport data
Date: Fri, 10 Feb 2023 08:47:29 +0000 [thread overview]
Message-ID: <Y+YEoaSDGUeKKysD@gmail.com> (raw)
In-Reply-To: <20230208142519.31192-5-alejandro.lucero-palau@amd.com>
On Wed, Feb 08, 2023 at 02:25:15PM +0000, alejandro.lucero-palau@amd.com wrote:
> From: Alejandro Lucero <alejandro.lucero-palau@amd.com>
>
> Obtaining mport id is based on asking the firmware about it. This is
> still needed for mport initialization itself, but once the mport data is
> now kept by the driver, further mport id request can be satisfied
> internally without firmware interaction.
>
> Previous function is just modified in name making clear the firmware
> interaction. The new function uses the old name and looks for the data
> in the mport data structure.
>
> Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
> ---
> drivers/net/ethernet/sfc/ef100_nic.c | 4 ++--
> drivers/net/ethernet/sfc/ef100_rep.c | 5 +----
> drivers/net/ethernet/sfc/mae.c | 27 ++++++++++++++++++++++++++-
> drivers/net/ethernet/sfc/mae.h | 2 ++
> 4 files changed, 31 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/ethernet/sfc/ef100_nic.c b/drivers/net/ethernet/sfc/ef100_nic.c
> index 07e7dca0e4f2..aa11f0925e27 100644
> --- a/drivers/net/ethernet/sfc/ef100_nic.c
> +++ b/drivers/net/ethernet/sfc/ef100_nic.c
> @@ -736,7 +736,7 @@ static int efx_ef100_get_base_mport(struct efx_nic *efx)
> /* Construct mport selector for "physical network port" */
> efx_mae_mport_wire(efx, &selector);
> /* Look up actual mport ID */
> - rc = efx_mae_lookup_mport(efx, selector, &id);
> + rc = efx_mae_fw_lookup_mport(efx, selector, &id);
> if (rc)
> return rc;
> /* The ID should always fit in 16 bits, because that's how wide the
> @@ -751,7 +751,7 @@ static int efx_ef100_get_base_mport(struct efx_nic *efx)
> /* Construct mport selector for "calling PF" */
> efx_mae_mport_uplink(efx, &selector);
> /* Look up actual mport ID */
> - rc = efx_mae_lookup_mport(efx, selector, &id);
> + rc = efx_mae_fw_lookup_mport(efx, selector, &id);
> if (rc)
> return rc;
> if (id >> 16)
> diff --git a/drivers/net/ethernet/sfc/ef100_rep.c b/drivers/net/ethernet/sfc/ef100_rep.c
> index ebe7b1275713..9cd1a3ac67e0 100644
> --- a/drivers/net/ethernet/sfc/ef100_rep.c
> +++ b/drivers/net/ethernet/sfc/ef100_rep.c
> @@ -243,14 +243,11 @@ static struct efx_rep *efx_ef100_rep_create_netdev(struct efx_nic *efx,
> static int efx_ef100_configure_rep(struct efx_rep *efv)
> {
> struct efx_nic *efx = efv->parent;
> - u32 selector;
> int rc;
>
> efv->rx_pring_size = EFX_REP_DEFAULT_PSEUDO_RING_SIZE;
> - /* Construct mport selector for corresponding VF */
> - efx_mae_mport_vf(efx, efv->idx, &selector);
> /* Look up actual mport ID */
> - rc = efx_mae_lookup_mport(efx, selector, &efv->mport);
> + rc = efx_mae_lookup_mport(efx, efv->idx, &efv->mport);
> if (rc)
> return rc;
> pci_dbg(efx->pci_dev, "VF %u has mport ID %#x\n", efv->idx, efv->mport);
> diff --git a/drivers/net/ethernet/sfc/mae.c b/drivers/net/ethernet/sfc/mae.c
> index 725a3ab31087..6321fd393fc3 100644
> --- a/drivers/net/ethernet/sfc/mae.c
> +++ b/drivers/net/ethernet/sfc/mae.c
> @@ -97,7 +97,7 @@ void efx_mae_mport_mport(struct efx_nic *efx __always_unused, u32 mport_id, u32
> }
>
> /* id is really only 24 bits wide */
> -int efx_mae_lookup_mport(struct efx_nic *efx, u32 selector, u32 *id)
> +int efx_mae_fw_lookup_mport(struct efx_nic *efx, u32 selector, u32 *id)
> {
> MCDI_DECLARE_BUF(outbuf, MC_CMD_MAE_MPORT_LOOKUP_OUT_LEN);
> MCDI_DECLARE_BUF(inbuf, MC_CMD_MAE_MPORT_LOOKUP_IN_LEN);
> @@ -488,6 +488,31 @@ int efx_mae_free_counter(struct efx_nic *efx, struct efx_tc_counter *cnt)
> return 0;
> }
>
> +int efx_mae_lookup_mport(struct efx_nic *efx, u32 vf_idx, u32 *id)
> +{
> + struct ef100_nic_data *nic_data = efx->nic_data;
> + struct efx_mae *mae = efx->mae;
> + struct rhashtable_iter walk;
> + struct mae_mport_desc *m;
> + int rc = -ENOENT;
> +
> + rhashtable_walk_enter(&mae->mports_ht, &walk);
> + rhashtable_walk_start(&walk);
> + while ((m = rhashtable_walk_next(&walk)) != NULL) {
> + if (m->mport_type == MAE_MPORT_DESC_MPORT_TYPE_VNIC &&
> + m->interface_idx == nic_data->local_mae_intf &&
> + m->pf_idx == 0 &&
> + m->vf_idx == vf_idx) {
> + *id = m->mport_id;
> + rc = 0;
> + break;
> + }
> + }
> + rhashtable_walk_stop(&walk);
> + rhashtable_walk_exit(&walk);
> + return rc;
> +}
> +
> static bool efx_mae_asl_id(u32 id)
> {
> return !!(id & BIT(31));
> diff --git a/drivers/net/ethernet/sfc/mae.h b/drivers/net/ethernet/sfc/mae.h
> index daa29d2cde96..b9bf86c47cda 100644
> --- a/drivers/net/ethernet/sfc/mae.h
> +++ b/drivers/net/ethernet/sfc/mae.h
> @@ -96,4 +96,6 @@ int efx_mae_delete_rule(struct efx_nic *efx, u32 id);
> int efx_init_mae(struct efx_nic *efx);
> void efx_fini_mae(struct efx_nic *efx);
> void efx_mae_remove_mport(void *desc, void *arg);
> +int efx_mae_fw_lookup_mport(struct efx_nic *efx, u32 selector, u32 *id);
> +int efx_mae_lookup_mport(struct efx_nic *efx, u32 vf, u32 *id);
> #endif /* EF100_MAE_H */
> --
> 2.17.1
next prev parent reply other threads:[~2023-02-10 8:47 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-08 14:25 [PATCH v6 net-next 0/8] sfc: devlink support for ef100 alejandro.lucero-palau
2023-02-08 14:25 ` [PATCH v6 net-next 1/8] sfc: add " alejandro.lucero-palau
2023-02-10 8:28 ` Martin Habets
2023-02-08 14:25 ` [PATCH v6 net-next 2/8] sfc: add devlink info " alejandro.lucero-palau
2023-02-08 14:38 ` Jiri Pirko
2023-02-08 15:24 ` Lucero Palau, Alejandro
2023-02-09 10:46 ` Lucero Palau, Alejandro
2023-02-10 11:56 ` Jiri Pirko
2023-02-10 8:40 ` Martin Habets
2023-02-10 9:07 ` Lucero Palau, Alejandro
2023-02-10 15:01 ` Lucero Palau, Alejandro
2023-02-08 14:25 ` [PATCH v6 net-next 3/8] sfc: enumerate mports in ef100 alejandro.lucero-palau
2023-02-10 8:46 ` Martin Habets
2023-02-08 14:25 ` [PATCH v6 net-next 4/8] sfc: add mport lookup based on driver's mport data alejandro.lucero-palau
2023-02-10 8:47 ` Martin Habets [this message]
2023-02-08 14:25 ` [PATCH v6 net-next 5/8] sfc: add devlink port support for ef100 alejandro.lucero-palau
2023-02-10 8:49 ` Martin Habets
2023-02-08 14:25 ` [PATCH v6 net-next 6/8] sfc: obtain device mac address based on firmware handle " alejandro.lucero-palau
2023-02-10 8:50 ` Martin Habets
2023-02-08 14:25 ` [PATCH v6 net-next 7/8] sfc: add support for devlink port_function_hw_addr_get in ef100 alejandro.lucero-palau
2023-02-08 14:40 ` Jiri Pirko
2023-02-10 8:52 ` Martin Habets
2023-02-08 14:25 ` [PATCH v6 net-next 8/8] sfc: add support for devlink port_function_hw_addr_set " alejandro.lucero-palau
2023-02-08 14:40 ` Jiri Pirko
2023-02-10 8:53 ` Martin Habets
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y+YEoaSDGUeKKysD@gmail.com \
--to=habetsm.xilinx@gmail.com \
--cc=alejandro.lucero-palau@amd.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=ecree.xilinx@gmail.com \
--cc=edumazet@google.com \
--cc=jiri@nvidia.com \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-net-drivers@amd.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).