From: Martin Habets <habetsm.xilinx@gmail.com>
To: alejandro.lucero-palau@amd.com
Cc: netdev@vger.kernel.org, linux-net-drivers@amd.com,
davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
edumazet@google.com, ecree.xilinx@gmail.com,
linux-doc@vger.kernel.org, corbet@lwn.net, jiri@nvidia.com
Subject: Re: [PATCH v6 net-next 6/8] sfc: obtain device mac address based on firmware handle for ef100
Date: Fri, 10 Feb 2023 08:50:51 +0000 [thread overview]
Message-ID: <Y+YFa62Yuz9kHtzM@gmail.com> (raw)
In-Reply-To: <20230208142519.31192-7-alejandro.lucero-palau@amd.com>
On Wed, Feb 08, 2023 at 02:25:17PM +0000, alejandro.lucero-palau@amd.com wrote:
> From: Alejandro Lucero <alejandro.lucero-palau@amd.com>
>
> Getting device mac address is currently based on a specific MCDI command
> only available for the PF. This patch changes the MCDI command to a
> generic one for PFs and VFs based on a client handle. This allows both
> PFs and VFs to ask for their mac address during initialization using the
> CLIENT_HANDLE_SELF.
>
> Moreover, the patch allows other client handles which will be used by
> the PF to ask for mac addresses linked to VFs. This is necessary for
> suporting the port_function_hw_addr_get devlink function in further
> patches.
>
> Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
> ---
> drivers/net/ethernet/sfc/ef100_netdev.c | 10 +++++++
> drivers/net/ethernet/sfc/ef100_nic.c | 37 +++++++++++++------------
> drivers/net/ethernet/sfc/ef100_nic.h | 2 ++
> 3 files changed, 31 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/net/ethernet/sfc/ef100_netdev.c b/drivers/net/ethernet/sfc/ef100_netdev.c
> index 368147359299..d916877b5a9a 100644
> --- a/drivers/net/ethernet/sfc/ef100_netdev.c
> +++ b/drivers/net/ethernet/sfc/ef100_netdev.c
> @@ -359,6 +359,7 @@ int ef100_probe_netdev(struct efx_probe_data *probe_data)
> {
> struct efx_nic *efx = &probe_data->efx;
> struct efx_probe_data **probe_ptr;
> + struct ef100_nic_data *nic_data;
> struct net_device *net_dev;
> int rc;
>
> @@ -410,6 +411,15 @@ int ef100_probe_netdev(struct efx_probe_data *probe_data)
> /* Don't fail init if RSS setup doesn't work. */
> efx_mcdi_push_default_indir_table(efx, efx->n_rx_channels);
>
> + nic_data = efx->nic_data;
> + rc = ef100_get_mac_address(efx, net_dev->perm_addr, CLIENT_HANDLE_SELF,
> + efx->type->is_vf);
> + if (rc)
> + return rc;
> + /* Assign MAC address */
> + eth_hw_addr_set(net_dev, net_dev->perm_addr);
> + ether_addr_copy(nic_data->port_id, net_dev->perm_addr);
> +
> /* devlink creation, registration and lock */
> rc = efx_probe_devlink_and_lock(efx);
> if (rc)
> diff --git a/drivers/net/ethernet/sfc/ef100_nic.c b/drivers/net/ethernet/sfc/ef100_nic.c
> index aa11f0925e27..aa48c79a2149 100644
> --- a/drivers/net/ethernet/sfc/ef100_nic.c
> +++ b/drivers/net/ethernet/sfc/ef100_nic.c
> @@ -130,23 +130,34 @@ static void ef100_mcdi_reboot_detected(struct efx_nic *efx)
>
> /* MCDI calls
> */
> -static int ef100_get_mac_address(struct efx_nic *efx, u8 *mac_address)
> +int ef100_get_mac_address(struct efx_nic *efx, u8 *mac_address,
> + int client_handle, bool empty_ok)
> {
> - MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_MAC_ADDRESSES_OUT_LEN);
> + MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_CLIENT_MAC_ADDRESSES_OUT_LEN(1));
> + MCDI_DECLARE_BUF(inbuf, MC_CMD_GET_CLIENT_MAC_ADDRESSES_IN_LEN);
> size_t outlen;
> int rc;
>
> BUILD_BUG_ON(MC_CMD_GET_MAC_ADDRESSES_IN_LEN != 0);
> + MCDI_SET_DWORD(inbuf, GET_CLIENT_MAC_ADDRESSES_IN_CLIENT_HANDLE,
> + client_handle);
>
> - rc = efx_mcdi_rpc(efx, MC_CMD_GET_MAC_ADDRESSES, NULL, 0,
> - outbuf, sizeof(outbuf), &outlen);
> + rc = efx_mcdi_rpc(efx, MC_CMD_GET_CLIENT_MAC_ADDRESSES, inbuf,
> + sizeof(inbuf), outbuf, sizeof(outbuf), &outlen);
> if (rc)
> return rc;
> - if (outlen < MC_CMD_GET_MAC_ADDRESSES_OUT_LEN)
> - return -EIO;
>
> - ether_addr_copy(mac_address,
> - MCDI_PTR(outbuf, GET_MAC_ADDRESSES_OUT_MAC_ADDR_BASE));
> + if (outlen >= MC_CMD_GET_CLIENT_MAC_ADDRESSES_OUT_LEN(1)) {
> + ether_addr_copy(mac_address,
> + MCDI_PTR(outbuf, GET_CLIENT_MAC_ADDRESSES_OUT_MAC_ADDRS));
> + } else if (empty_ok) {
> + pci_warn(efx->pci_dev,
> + "No MAC address provisioned for client ID %#x.\n",
> + client_handle);
> + eth_zero_addr(mac_address);
> + } else {
> + return -ENOENT;
> + }
> return 0;
> }
>
> @@ -1117,13 +1128,6 @@ int ef100_probe_netdev_pf(struct efx_nic *efx)
> struct net_device *net_dev = efx->net_dev;
> int rc;
>
> - rc = ef100_get_mac_address(efx, net_dev->perm_addr);
> - if (rc)
> - goto fail;
> - /* Assign MAC address */
> - eth_hw_addr_set(net_dev, net_dev->perm_addr);
> - memcpy(nic_data->port_id, net_dev->perm_addr, ETH_ALEN);
> -
> if (!nic_data->grp_mae)
> return 0;
>
> @@ -1163,9 +1167,6 @@ int ef100_probe_netdev_pf(struct efx_nic *efx)
> efx->fixed_features |= NETIF_F_HW_TC;
> }
> #endif
> - return 0;
> -
> -fail:
> return rc;
> }
>
> diff --git a/drivers/net/ethernet/sfc/ef100_nic.h b/drivers/net/ethernet/sfc/ef100_nic.h
> index 496aea43c60f..e59044072333 100644
> --- a/drivers/net/ethernet/sfc/ef100_nic.h
> +++ b/drivers/net/ethernet/sfc/ef100_nic.h
> @@ -92,4 +92,6 @@ int efx_ef100_init_datapath_caps(struct efx_nic *efx);
> int ef100_phy_probe(struct efx_nic *efx);
> int ef100_filter_table_probe(struct efx_nic *efx);
>
> +int ef100_get_mac_address(struct efx_nic *efx, u8 *mac_address,
> + int client_handle, bool empty_ok);
> #endif /* EFX_EF100_NIC_H */
> --
> 2.17.1
next prev parent reply other threads:[~2023-02-10 8:51 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-08 14:25 [PATCH v6 net-next 0/8] sfc: devlink support for ef100 alejandro.lucero-palau
2023-02-08 14:25 ` [PATCH v6 net-next 1/8] sfc: add " alejandro.lucero-palau
2023-02-10 8:28 ` Martin Habets
2023-02-08 14:25 ` [PATCH v6 net-next 2/8] sfc: add devlink info " alejandro.lucero-palau
2023-02-08 14:38 ` Jiri Pirko
2023-02-08 15:24 ` Lucero Palau, Alejandro
2023-02-09 10:46 ` Lucero Palau, Alejandro
2023-02-10 11:56 ` Jiri Pirko
2023-02-10 8:40 ` Martin Habets
2023-02-10 9:07 ` Lucero Palau, Alejandro
2023-02-10 15:01 ` Lucero Palau, Alejandro
2023-02-08 14:25 ` [PATCH v6 net-next 3/8] sfc: enumerate mports in ef100 alejandro.lucero-palau
2023-02-10 8:46 ` Martin Habets
2023-02-08 14:25 ` [PATCH v6 net-next 4/8] sfc: add mport lookup based on driver's mport data alejandro.lucero-palau
2023-02-10 8:47 ` Martin Habets
2023-02-08 14:25 ` [PATCH v6 net-next 5/8] sfc: add devlink port support for ef100 alejandro.lucero-palau
2023-02-10 8:49 ` Martin Habets
2023-02-08 14:25 ` [PATCH v6 net-next 6/8] sfc: obtain device mac address based on firmware handle " alejandro.lucero-palau
2023-02-10 8:50 ` Martin Habets [this message]
2023-02-08 14:25 ` [PATCH v6 net-next 7/8] sfc: add support for devlink port_function_hw_addr_get in ef100 alejandro.lucero-palau
2023-02-08 14:40 ` Jiri Pirko
2023-02-10 8:52 ` Martin Habets
2023-02-08 14:25 ` [PATCH v6 net-next 8/8] sfc: add support for devlink port_function_hw_addr_set " alejandro.lucero-palau
2023-02-08 14:40 ` Jiri Pirko
2023-02-10 8:53 ` Martin Habets
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y+YFa62Yuz9kHtzM@gmail.com \
--to=habetsm.xilinx@gmail.com \
--cc=alejandro.lucero-palau@amd.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=ecree.xilinx@gmail.com \
--cc=edumazet@google.com \
--cc=jiri@nvidia.com \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-net-drivers@amd.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).