[PATCH v2 net-next] net: phy: motorcomm: uninitialized variables in yt8531_link_change_notify()

[Dan Carpenter <error27@gmail.com>]

These booleans are never set to false, but are just used without being
initialized.

Fixes: 4ac94f728a58 ("net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phy")
Signed-off-by: Dan Carpenter <error27@gmail.com>
---
v2: reverse Christmas tree.  Also add "motorcomm" to the subject.  It
really feels like previous patches to this driver should have had
motorcomm in the subject as well.  It's a common anti-pattern to only
put the subsystem name and not the driver name when adding a new file.

 drivers/net/phy/motorcomm.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index ee7c37dfdca0..2fa5a90e073b 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c
@@ -1533,10 +1533,10 @@ static int yt8531_config_init(struct phy_device *phydev)
 static void yt8531_link_change_notify(struct phy_device *phydev)
 {
 	struct device_node *node = phydev->mdio.dev.of_node;
+	bool tx_clk_1000_inverted = false;
+	bool tx_clk_100_inverted = false;
+	bool tx_clk_10_inverted = false;
 	bool tx_clk_adj_enabled = false;
-	bool tx_clk_1000_inverted;
-	bool tx_clk_100_inverted;
-	bool tx_clk_10_inverted;
 	u16 val = 0;
 	int ret;
 
-- 
2.39.1