Re: [PATCH net-next] net: phy: mxl-gpy: Add PHY Auto/MDI/MDI-X set driver for GPY211 chips

["Russell King (Oracle)" <linux@armlinux.org.uk>]

Hi,

On Fri, Oct 21, 2022 at 03:33:05PM +0530, Raju Lakkaraju wrote:
> @@ -370,6 +415,38 @@ static int gpy_config_aneg(struct phy_device *phydev)
>  			      VSPEC1_SGMII_CTRL_ANRS, VSPEC1_SGMII_CTRL_ANRS);
>  }
>  
> +static void gpy_update_mdix(struct phy_device *phydev)
> +{
> +	int ret;
> +
> +	ret = phy_read(phydev, PHY_CTL1);
> +	if (ret < 0) {
> +		phydev_err(phydev, "Error: MDIO register access failed: %d\n",
> +			   ret);
> +		return;
> +	}
> +
> +	if (ret & PHY_CTL1_AMDIX)
> +		phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
> +	else
> +		if (ret & PHY_CTL1_MDICD || ret & PHY_CTL1_MDIAB)
> +			phydev->mdix_ctrl = ETH_TP_MDI_X;
> +		else
> +			phydev->mdix_ctrl = ETH_TP_MDI;

I think this would be better formatted as:

	if (...)
		...
	else if (...)
		...
	else
		...

We don't indent unless there's braces, and if there's braces, coding
style advises braces on both sides of the "else". So, much better to
use the formatting I suggest above.

Apart from that, nothing stands out as being wrong in this patch.

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!