Re: [PATCH net-next v3 08/16] net: bridge: Add netlink knobs for number / maximum MDB entries

[Ido Schimmel <idosch@nvidia.com>]

On Thu, Feb 02, 2023 at 06:59:26PM +0100, Petr Machata wrote:
> The previous patch added accounting for number of MDB entries per port and
> per port-VLAN, and the logic to verify that these values stay within
> configured bounds. However it didn't provide means to actually configure
> those bounds or read the occupancy. This patch does that.
> 
> Two new netlink attributes are added for the MDB occupancy:
> IFLA_BRPORT_MCAST_N_GROUPS for the per-port occupancy and
> BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS for the per-port-VLAN occupancy.
> And another two for the maximum number of MDB entries:
> IFLA_BRPORT_MCAST_MAX_GROUPS for the per-port maximum, and
> BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS for the per-port-VLAN one.
> 
> Note that the two new IFLA_BRPORT_ attributes prompt bumping of
> RTNL_SLAVE_MAX_TYPE to size the slave attribute tables large enough.
> 
> The new attributes are used like this:
> 
>  # ip link add name br up type bridge vlan_filtering 1 mcast_snooping 1 \
>                                       mcast_vlan_snooping 1 mcast_querier 1
>  # ip link set dev v1 master br
>  # bridge vlan add dev v1 vid 2
> 
>  # bridge vlan set dev v1 vid 1 mcast_max_groups 1
>  # bridge mdb add dev br port v1 grp 230.1.2.3 temp vid 1
>  # bridge mdb add dev br port v1 grp 230.1.2.4 temp vid 1
>  Error: bridge: Port-VLAN is already in 1 groups, and mcast_max_groups=1.
> 
>  # bridge link set dev v1 mcast_max_groups 1
>  # bridge mdb add dev br port v1 grp 230.1.2.3 temp vid 2
>  Error: bridge: Port is already in 1 groups, and mcast_max_groups=1.
> 
>  # bridge -d link show
>  5: v1@v2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br [...]
>      [...] mcast_n_groups 1 mcast_max_groups 1
> 
>  # bridge -d vlan show
>  port              vlan-id
>  br                1 PVID Egress Untagged
>                      state forwarding mcast_router 1
>  v1                1 PVID Egress Untagged
>                      [...] mcast_n_groups 1 mcast_max_groups 1
>                    2
>                      [...] mcast_n_groups 0 mcast_max_groups 0
> 
> Signed-off-by: Petr Machata <petrm@nvidia.com>

Reviewed-by: Ido Schimmel <idosch@nvidia.com>