netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <linux@armlinux.org.uk>
To: Martyn Welch <martyn.welch@collabora.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	netdev@vger.kernel.org
Subject: Re: [PATCH RFC net] net: dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports
Date: Tue, 7 Dec 2021 14:23:19 +0000	[thread overview]
Message-ID: <Ya9uV+UVx1ymLg2E@shell.armlinux.org.uk> (raw)
In-Reply-To: <aa773849b84297679f4eb4b3743518856ca5b71a.camel@collabora.com>

On Tue, Dec 07, 2021 at 02:20:28PM +0000, Martyn Welch wrote:
> On Tue, 2021-12-07 at 12:58 +0000, Russell King (Oracle) wrote:
> > On Tue, Dec 07, 2021 at 12:47:35PM +0000, Martyn Welch wrote:
> > > Sorry Russell, but unfortunately this patch doesn't seem to be
> > > resolving the issue for me.
> > > 
> > > I've dumped in a bit of debug around this change to see if I could
> > > determine what was going on here, it seems that in my case the
> > > function
> > > is being exited before this at:
> > > 
> > > /* FIXME: is this the correct test? If we're in fixed mode on an
> > >  * internal port, why should we process this any different from
> > >  * PHY mode? On the other hand, the port may be automedia between
> > >  * an internal PHY and the serdes...
> > >  */
> > > if ((mode == MLO_AN_PHY) && mv88e6xxx_phy_is_internal(ds, port))
> > >         return;
> > 
> > Oh, I was going to remove that, but clearly forgot, sorry. Please can
> > you try again with that removed? Meanwhile, I'll update the patch at
> > my end.
> > 
> 
> Yes! That makes it work for me.
> 
> To be clear, the additional change I made was:
> 
> 
> diff --git a/drivers/net/dsa/mv88e6xxx/chip.c
> b/drivers/net/dsa/mv88e6xxx/chip.c
> index b033e653d3f4..14f87f6ac479 100644
> --- a/drivers/net/dsa/mv88e6xxx/chip.c
> +++ b/drivers/net/dsa/mv88e6xxx/chip.c
> @@ -702,14 +702,6 @@ static void mv88e6xxx_mac_config(struct dsa_switch
> *ds, int port,
>  
>         p = &chip->ports[port];
>  
> -       /* FIXME: is this the correct test? If we're in fixed mode on
> an
> -        * internal port, why should we process this any different from
> -        * PHY mode? On the other hand, the port may be automedia
> between
> -        * an internal PHY and the serdes...
> -        */
> -       if ((mode == MLO_AN_PHY) && mv88e6xxx_phy_is_internal(ds,
> port))
> -               return;
> -
>         mv88e6xxx_reg_lock(chip);
>  
>         if (mode != MLO_AN_PHY || !mv88e6xxx_phy_is_internal(ds, port))
> {
> 
> 
> Assuming that's also what you've done:

That is exactly right, indeed, thanks!

> Tested-by: Martyn Welch <martyn.welch@collabora.com>
> 
> Thanks for your help!

Thanks for testing. I'll wait a little while in case there's any
further comments.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

  reply	other threads:[~2021-12-07 14:23 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-07 10:59 [PATCH RFC net] net: dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports Russell King (Oracle)
2021-12-07 12:47 ` Martyn Welch
2021-12-07 12:58   ` Russell King (Oracle)
2021-12-07 14:20     ` Martyn Welch
2021-12-07 14:23       ` Russell King (Oracle) [this message]
2021-12-07 14:54 ` Andrew Lunn
2021-12-07 14:58   ` Russell King (Oracle)
2021-12-07 15:07     ` Andrew Lunn
2021-12-07 15:28       ` Russell King (Oracle)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Ya9uV+UVx1ymLg2E@shell.armlinux.org.uk \
    --to=linux@armlinux.org.uk \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=martyn.welch@collabora.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).