[PATCH RFT] ieee802154: atusb: move to new USB API

[PATCH RFT] ieee802154: atusb: move to new USB API

[Pavel Skripkin]

Alexander reported a use of uninitialized value in
atusb_set_extended_addr(), that is caused by reading 0 bytes via
usb_control_msg().

Since there is an API, that cannot read less bytes, than was requested,
let's move atusb driver to use it. It will fix all potintial bugs with
uninit values and make code more modern

Fail log:

BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
 ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
 atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
 atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
 usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396

Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
Cc: stable@vger.kernel.org # 5.9
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
---
 drivers/net/ieee802154/atusb.c | 61 +++++++++++++++++++++-------------
 1 file changed, 38 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
index 23ee0b14cbfa..43befea0110f 100644
--- a/drivers/net/ieee802154/atusb.c
+++ b/drivers/net/ieee802154/atusb.c
@@ -80,10 +80,9 @@ struct atusb_chip_data {
  * in atusb->err and reject all subsequent requests until the error is cleared.
  */
 
-static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
-			     __u8 request, __u8 requesttype,
-			     __u16 value, __u16 index,
-			     void *data, __u16 size, int timeout)
+static int atusb_control_msg_recv(struct atusb *atusb, __u8 request, __u8 requesttype,
+				  __u16 value, __u16 index,
+				  void *data, __u16 size, int timeout)
 {
 	struct usb_device *usb_dev = atusb->usb_dev;
 	int ret;
@@ -91,8 +90,30 @@ static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
 	if (atusb->err)
 		return atusb->err;
 
-	ret = usb_control_msg(usb_dev, pipe, request, requesttype,
-			      value, index, data, size, timeout);
+	ret = usb_control_msg_recv(usb_dev, 0, request, requesttype,
+				   value, index, data, size, timeout, GFP_KERNEL);
+	if (ret < 0) {
+		atusb->err = ret;
+		dev_err(&usb_dev->dev,
+			"%s: req 0x%02x val 0x%x idx 0x%x, error %d\n",
+			__func__, request, value, index, ret);
+	}
+
+	return ret;
+}
+
+static int atusb_control_msg_send(struct atusb *atusb, __u8 request, __u8 requesttype,
+				  __u16 value, __u16 index,
+				  void *data, __u16 size, int timeout)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	int ret;
+
+	if (atusb->err)
+		return atusb->err;
+
+	ret = usb_control_msg_send(usb_dev, 0, request, requesttype,
+				   value, index, data, size, timeout, GFP_KERNEL);
 	if (ret < 0) {
 		atusb->err = ret;
 		dev_err(&usb_dev->dev,
@@ -107,8 +128,7 @@ static int atusb_command(struct atusb *atusb, u8 cmd, u8 arg)
 	struct usb_device *usb_dev = atusb->usb_dev;
 
 	dev_dbg(&usb_dev->dev, "%s: cmd = 0x%x\n", __func__, cmd);
-	return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
-				 cmd, ATUSB_REQ_TO_DEV, arg, 0, NULL, 0, 1000);
+	return atusb_control_msg_send(atusb, cmd, ATUSB_REQ_TO_DEV, arg, 0, NULL, 0, 1000);
 }
 
 static int atusb_write_reg(struct atusb *atusb, u8 reg, u8 value)
@@ -116,9 +136,8 @@ static int atusb_write_reg(struct atusb *atusb, u8 reg, u8 value)
 	struct usb_device *usb_dev = atusb->usb_dev;
 
 	dev_dbg(&usb_dev->dev, "%s: 0x%02x <- 0x%02x\n", __func__, reg, value);
-	return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
-				 ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
-				 value, reg, NULL, 0, 1000);
+	return atusb_control_msg_send(atusb, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+				      value, reg, NULL, 0, 1000);
 }
 
 static int atusb_read_reg(struct atusb *atusb, u8 reg)
@@ -133,9 +152,8 @@ static int atusb_read_reg(struct atusb *atusb, u8 reg)
 		return -ENOMEM;
 
 	dev_dbg(&usb_dev->dev, "%s: reg = 0x%x\n", __func__, reg);
-	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
-				ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
-				0, reg, buffer, 1, 1000);
+	ret = atusb_control_msg_recv(atusb, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				     0, reg, buffer, 1, 1000);
 
 	if (ret >= 0) {
 		value = buffer[0];
@@ -805,9 +823,8 @@ static int atusb_get_and_show_revision(struct atusb *atusb)
 		return -ENOMEM;
 
 	/* Get a couple of the ATMega Firmware values */
-	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
-				ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0,
-				buffer, 3, 1000);
+	ret = atusb_control_msg_recv(atusb, ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0,
+				     buffer, 3, 1000);
 	if (ret >= 0) {
 		atusb->fw_ver_maj = buffer[0];
 		atusb->fw_ver_min = buffer[1];
@@ -861,9 +878,8 @@ static int atusb_get_and_show_build(struct atusb *atusb)
 	if (!build)
 		return -ENOMEM;
 
-	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
-				ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0,
-				build, ATUSB_BUILD_SIZE, 1000);
+	ret = atusb_control_msg_recv(atusb, ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0,
+				     build, ATUSB_BUILD_SIZE, 1000);
 	if (ret >= 0) {
 		build[ret] = 0;
 		dev_info(&usb_dev->dev, "Firmware: build %s\n", build);
@@ -985,9 +1001,8 @@ static int atusb_set_extended_addr(struct atusb *atusb)
 		return -ENOMEM;
 
 	/* Firmware is new enough so we fetch the address from EEPROM */
-	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
-				ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0,
-				buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000);
+	ret = atusb_control_msg_recv(atusb, ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0,
+				     buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000);
 	if (ret < 0) {
 		dev_err(&usb_dev->dev, "failed to fetch extended address, random address set\n");
 		ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
-- 
2.34.1

Re: [PATCH RFT] ieee802154: atusb: move to new USB API

[Alexander Aring]

Hi,

On Sun, 2 Jan 2022 at 12:19, Pavel Skripkin <paskripkin@gmail.com> wrote:
>
> Alexander reported a use of uninitialized value in
> atusb_set_extended_addr(), that is caused by reading 0 bytes via
> usb_control_msg().
>

Does there exist no way to check on this and return an error on USB
API caller level?

> Since there is an API, that cannot read less bytes, than was requested,
> let's move atusb driver to use it. It will fix all potintial bugs with
> uninit values and make code more modern
>

If this is not possible to fix with the "old" USB API then I think the
"old" USB API needs to be fixed.
Changing to the new USB API as "making the code more modern" is a new
feature and is a candidate for next.

- Alex

Re: [PATCH RFT] ieee802154: atusb: move to new USB API

[Pavel Skripkin]

On 1/3/22 01:15, Alexander Aring wrote:
> Hi,
> 
> On Sun, 2 Jan 2022 at 12:19, Pavel Skripkin <paskripkin@gmail.com> wrote:
>>
>> Alexander reported a use of uninitialized value in
>> atusb_set_extended_addr(), that is caused by reading 0 bytes via
>> usb_control_msg().
>>
> 
> Does there exist no way to check on this and return an error on USB
> API caller level?
> 
>> Since there is an API, that cannot read less bytes, than was requested,
>> let's move atusb driver to use it. It will fix all potintial bugs with
>> uninit values and make code more modern
>>
> 
> If this is not possible to fix with the "old" USB API then I think the
> "old" USB API needs to be fixed.
> Changing to the new USB API as "making the code more modern" is a new
> feature and is a candidate for next.
> 

It can be fixed with the old one. Something like that should work:

-	if (ret < 0) {
-		atusb->err = ret;
+	if (ret < size) {
+		atusb->err = ret < 0: ret: -ENODATA;		

But I thought, that moving to new API is better fix, just because old 
one prone to uninit value bugs if error checking is wrong



With regards,
Pavel Skripkin

Re: [PATCH RFT] ieee802154: atusb: move to new USB API

[Alexander Aring]

Hi,

On Sun, 2 Jan 2022 at 17:21, Pavel Skripkin <paskripkin@gmail.com> wrote:
>
> On 1/3/22 01:15, Alexander Aring wrote:
> > Hi,
> >
> > On Sun, 2 Jan 2022 at 12:19, Pavel Skripkin <paskripkin@gmail.com> wrote:
> >>
> >> Alexander reported a use of uninitialized value in
> >> atusb_set_extended_addr(), that is caused by reading 0 bytes via
> >> usb_control_msg().
> >>
> >
> > Does there exist no way to check on this and return an error on USB
> > API caller level?
> >
> >> Since there is an API, that cannot read less bytes, than was requested,
> >> let's move atusb driver to use it. It will fix all potintial bugs with
> >> uninit values and make code more modern
> >>
> >
> > If this is not possible to fix with the "old" USB API then I think the
> > "old" USB API needs to be fixed.
> > Changing to the new USB API as "making the code more modern" is a new
> > feature and is a candidate for next.
> >
>
> It can be fixed with the old one. Something like that should work:
>
> -       if (ret < 0) {
> -               atusb->err = ret;
> +       if (ret < size) {
> +               atusb->err = ret < 0: ret: -ENODATA;
>
> But I thought, that moving to new API is better fix, just because old
> one prone to uninit value bugs if error checking is wrong

A fix should have the smallest changes as possible and not use "new
stuff" which might break other things. Also I am not sure since "when"
this new USB API exists. To backport the fix into stable send a fix
using the "old USB API".
If the fix is upstream you can send patches to use the new API and
remove the additional check if this is done by using the new API.
Maybe it's worth checking that the errno stays the same.

Thanks.

- Alex

[PATCH v2] ieee802154: atusb: fix uninit value in atusb_set_extended_addr

[Pavel Skripkin]

Alexander reported a use of uninitialized value in
atusb_set_extended_addr(), that is caused by reading 0 bytes via
usb_control_msg().

Fix it by validating if the number of bytes transferred is actually
correct, since usb_control_msg() may read less bytes, than was requested
by caller.

Fail log:

BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
 ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
 atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
 atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
 usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396

Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
---

Changes in v2:
	- Reworked fix approach, since moving to new USB API is not
	  suitable for backporting to stable kernels

---
 drivers/net/ieee802154/atusb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
index 23ee0b14cbfa..e6cc816dd7a1 100644
--- a/drivers/net/ieee802154/atusb.c
+++ b/drivers/net/ieee802154/atusb.c
@@ -93,7 +93,9 @@ static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
 
 	ret = usb_control_msg(usb_dev, pipe, request, requesttype,
 			      value, index, data, size, timeout);
-	if (ret < 0) {
+	if (ret < size) {
+		ret = ret < 0 ? ret : -ENODATA;
+
 		atusb->err = ret;
 		dev_err(&usb_dev->dev,
 			"%s: req 0x%02x val 0x%x idx 0x%x, error %d\n",
-- 
2.34.1

Re: [PATCH v2] ieee802154: atusb: fix uninit value in atusb_set_extended_addr

[Alexander Aring]

Hi,

On Mon, 3 Jan 2022 at 07:09, Pavel Skripkin <paskripkin@gmail.com> wrote:
>
> Alexander reported a use of uninitialized value in
> atusb_set_extended_addr(), that is caused by reading 0 bytes via
> usb_control_msg().
>
> Fix it by validating if the number of bytes transferred is actually
> correct, since usb_control_msg() may read less bytes, than was requested
> by caller.
>
> Fail log:
>
> BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
> BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
> BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
> Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
>  ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
>  atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
>  atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
>  usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
>
> Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
> Reported-by: Alexander Potapenko <glider@google.com>
> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>

Acked-by: Alexander Aring <aahringo@redhat.com>

Although I think if such error exists the most common solution would
be to replug the usb device and hope it gets resolved? A retry with a
maximum amount would be another try... However, let's hope those
errors are rare and we care about them when they occur.

Thanks.

- Alex

Re: [PATCH v2] ieee802154: atusb: fix uninit value in atusb_set_extended_addr

[Stefan Schmidt]

Hello.

On 03.01.22 13:09, Pavel Skripkin wrote:
> Alexander reported a use of uninitialized value in
> atusb_set_extended_addr(), that is caused by reading 0 bytes via
> usb_control_msg().
> 
> Fix it by validating if the number of bytes transferred is actually
> correct, since usb_control_msg() may read less bytes, than was requested
> by caller.
> 
> Fail log:
> 
> BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
> BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
> BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
> Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
>   ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
>   atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
>   atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
>   usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
> 
> Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
> Reported-by: Alexander Potapenko <glider@google.com>
> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
> ---
> 
> Changes in v2:
> 	- Reworked fix approach, since moving to new USB API is not
> 	  suitable for backporting to stable kernels
> 
> ---
>   drivers/net/ieee802154/atusb.c | 4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
> index 23ee0b14cbfa..e6cc816dd7a1 100644
> --- a/drivers/net/ieee802154/atusb.c
> +++ b/drivers/net/ieee802154/atusb.c
> @@ -93,7 +93,9 @@ static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
>   
>   	ret = usb_control_msg(usb_dev, pipe, request, requesttype,
>   			      value, index, data, size, timeout);
> -	if (ret < 0) {
> +	if (ret < size) {
> +		ret = ret < 0 ? ret : -ENODATA;
> +
>   		atusb->err = ret;
>   		dev_err(&usb_dev->dev,
>   			"%s: req 0x%02x val 0x%x idx 0x%x, error %d\n",
> 

It compiles, but does not work on the real hardware.

[    1.114698] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    1.261691] usb 1-1: New USB device found, idVendor=20b7, 
idProduct=1540, bcdDevice= 0.01
[    1.263421] usb 1-1: New USB device strings: Mfr=0, Product=0, 
SerialNumber=1
[    1.264952] usb 1-1: SerialNumber: 4630333438371502231a
[    1.278042] usb 1-1: ATUSB: AT86RF231 version 2
[    1.281087] usb 1-1: Firmware: major: 0, minor: 3, hardware type: 
ATUSB (2)
[    1.285191] usb 1-1: atusb_control_msg: req 0x01 val 0x0 idx 0x0, 
error -61
[    1.286903] usb 1-1: failed to fetch extended address, random address set
[    1.288757] usb 1-1: atusb_probe: initialization failed, error = -61
[    1.290922] atusb: probe of 1-1:1.0 failed with error -61


Without your patch it works as expected:

[    1.091925] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    1.237743] usb 1-1: New USB device found, idVendor=20b7, 
idProduct=1540, bcdDevice= 0.01
[    1.239788] usb 1-1: New USB device strings: Mfr=0, Product=0, 
SerialNumber=1
[    1.241432] usb 1-1: SerialNumber: 4630333438371502231a
[    1.255012] usb 1-1: ATUSB: AT86RF231 version 2
[    1.258073] usb 1-1: Firmware: major: 0, minor: 3, hardware type: 
ATUSB (2)
[    1.262170] usb 1-1: Firmware: build #132 Mo 28. Nov 16:20:35 CET 2016
[    1.266195] usb 1-1: Read permanent extended address 
10:e2:d5:ff:ff:00:02:e8 from device

regards
Stefan Schmidt

Re: [PATCH v2] ieee802154: atusb: fix uninit value in atusb_set_extended_addr

[Pavel Skripkin]

On 1/4/22 18:40, Stefan Schmidt wrote:
> 
> It compiles, but does not work on the real hardware.
> 
> [    1.114698] usb 1-1: new full-speed USB device number 2 using uhci_hcd
> [    1.261691] usb 1-1: New USB device found, idVendor=20b7,
> idProduct=1540, bcdDevice= 0.01
> [    1.263421] usb 1-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=1
> [    1.264952] usb 1-1: SerialNumber: 4630333438371502231a
> [    1.278042] usb 1-1: ATUSB: AT86RF231 version 2
> [    1.281087] usb 1-1: Firmware: major: 0, minor: 3, hardware type:
> ATUSB (2)
> [    1.285191] usb 1-1: atusb_control_msg: req 0x01 val 0x0 idx 0x0,
> error -61
> [    1.286903] usb 1-1: failed to fetch extended address, random address set
> [    1.288757] usb 1-1: atusb_probe: initialization failed, error = -61
> [    1.290922] atusb: probe of 1-1:1.0 failed with error -61
> 
> 
> Without your patch it works as expected:
> 
> [    1.091925] usb 1-1: new full-speed USB device number 2 using uhci_hcd
> [    1.237743] usb 1-1: New USB device found, idVendor=20b7,
> idProduct=1540, bcdDevice= 0.01
> [    1.239788] usb 1-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=1
> [    1.241432] usb 1-1: SerialNumber: 4630333438371502231a
> [    1.255012] usb 1-1: ATUSB: AT86RF231 version 2
> [    1.258073] usb 1-1: Firmware: major: 0, minor: 3, hardware type:
> ATUSB (2)
> [    1.262170] usb 1-1: Firmware: build #132 Mo 28. Nov 16:20:35 CET 2016
> [    1.266195] usb 1-1: Read permanent extended address
> 10:e2:d5:ff:ff:00:02:e8 from device
> 

Hi Stefan,

thanks for testing on real hw.

It looks like there is corner case, that Greg mentioned in this thread. 
atusb_get_and_show_build() reads firmware build info, which may have 
various length.

Maybe we can change atusb_control_msg() to usb_control_msg() in 
atusb_get_and_show_build(), since other callers do not have this problem



With regards,
Pavel Skripkin

Re: [PATCH v2] ieee802154: atusb: fix uninit value in atusb_set_extended_addr

[Stefan Schmidt]

Hello.

On 04.01.22 18:27, Pavel Skripkin wrote:
> On 1/4/22 18:40, Stefan Schmidt wrote:
>>
>> It compiles, but does not work on the real hardware.
>>
>> [    1.114698] usb 1-1: new full-speed USB device number 2 using uhci_hcd
>> [    1.261691] usb 1-1: New USB device found, idVendor=20b7,
>> idProduct=1540, bcdDevice= 0.01
>> [    1.263421] usb 1-1: New USB device strings: Mfr=0, Product=0,
>> SerialNumber=1
>> [    1.264952] usb 1-1: SerialNumber: 4630333438371502231a
>> [    1.278042] usb 1-1: ATUSB: AT86RF231 version 2
>> [    1.281087] usb 1-1: Firmware: major: 0, minor: 3, hardware type:
>> ATUSB (2)
>> [    1.285191] usb 1-1: atusb_control_msg: req 0x01 val 0x0 idx 0x0,
>> error -61
>> [    1.286903] usb 1-1: failed to fetch extended address, random 
>> address set
>> [    1.288757] usb 1-1: atusb_probe: initialization failed, error = -61
>> [    1.290922] atusb: probe of 1-1:1.0 failed with error -61
>>
>>
>> Without your patch it works as expected:
>>
>> [    1.091925] usb 1-1: new full-speed USB device number 2 using uhci_hcd
>> [    1.237743] usb 1-1: New USB device found, idVendor=20b7,
>> idProduct=1540, bcdDevice= 0.01
>> [    1.239788] usb 1-1: New USB device strings: Mfr=0, Product=0,
>> SerialNumber=1
>> [    1.241432] usb 1-1: SerialNumber: 4630333438371502231a
>> [    1.255012] usb 1-1: ATUSB: AT86RF231 version 2
>> [    1.258073] usb 1-1: Firmware: major: 0, minor: 3, hardware type:
>> ATUSB (2)
>> [    1.262170] usb 1-1: Firmware: build #132 Mo 28. Nov 16:20:35 CET 2016
>> [    1.266195] usb 1-1: Read permanent extended address
>> 10:e2:d5:ff:ff:00:02:e8 from device
>>
> 
> Hi Stefan,
> 
> thanks for testing on real hw.
> 
> It looks like there is corner case, that Greg mentioned in this thread. 
> atusb_get_and_show_build() reads firmware build info, which may have 
> various length.
> 
> Maybe we can change atusb_control_msg() to usb_control_msg() in 
> atusb_get_and_show_build(), since other callers do not have this problem

That works for me.

I will also have a look at the use of the modern USB API for next. The 
fix here has a higher prio for me to get in and backported though. Once 
we have this we can look at bigger changes in atusb.

regards
Stefan Schmidt

Re: [PATCH v2] ieee802154: atusb: fix uninit value in atusb_set_extended_addr

[Pavel Skripkin]

On 1/4/22 21:04, Stefan Schmidt wrote:
>> Hi Stefan,
>> 
>> thanks for testing on real hw.
>> 
>> It looks like there is corner case, that Greg mentioned in this thread. 
>> atusb_get_and_show_build() reads firmware build info, which may have 
>> various length.
>> 
>> Maybe we can change atusb_control_msg() to usb_control_msg() in 
>> atusb_get_and_show_build(), since other callers do not have this problem
> 
> That works for me.
> 

Nice! Will prepare v3.


Thanks for testing once again!

> I will also have a look at the use of the modern USB API for next. The
> fix here has a higher prio for me to get in and backported though. Once
> we have this we can look at bigger changes in atusb.
> 


With regards,
Pavel Skripkin

[PATCH v3] ieee802154: atusb: fix uninit value in atusb_set_extended_addr

[Pavel Skripkin]

Alexander reported a use of uninitialized value in
atusb_set_extended_addr(), that is caused by reading 0 bytes via
usb_control_msg().

Fix it by validating if the number of bytes transferred is actually
correct, since usb_control_msg() may read less bytes, than was requested
by caller.

Fail log:

BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
 ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
 atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
 atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
 usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396

Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
Reported-by: Alexander Potapenko <glider@google.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
---

Changes in v3:
	- Changed atusb_control_msg() to usb_control_msg() in
	  atusb_get_and_show_build(), since request there may read various length
	  data

Changes in v2:
	- Reworked fix approach, since moving to new USB API is not
	  suitable for backporting to stable kernels

---
 drivers/net/ieee802154/atusb.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
index 23ee0b14cbfa..2f5e7b31032a 100644
--- a/drivers/net/ieee802154/atusb.c
+++ b/drivers/net/ieee802154/atusb.c
@@ -93,7 +93,9 @@ static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
 
 	ret = usb_control_msg(usb_dev, pipe, request, requesttype,
 			      value, index, data, size, timeout);
-	if (ret < 0) {
+	if (ret < size) {
+		ret = ret < 0 ? ret : -ENODATA;
+
 		atusb->err = ret;
 		dev_err(&usb_dev->dev,
 			"%s: req 0x%02x val 0x%x idx 0x%x, error %d\n",
@@ -861,9 +863,9 @@ static int atusb_get_and_show_build(struct atusb *atusb)
 	if (!build)
 		return -ENOMEM;
 
-	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
-				ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0,
-				build, ATUSB_BUILD_SIZE, 1000);
+	/* We cannot call atusb_control_msg() here, since this request may read various length data */
+	ret = usb_control_msg(atusb->usb_dev, usb_rcvctrlpipe(usb_dev, 0), ATUSB_BUILD,
+			      ATUSB_REQ_FROM_DEV, 0, 0, build, ATUSB_BUILD_SIZE, 1000);
 	if (ret >= 0) {
 		build[ret] = 0;
 		dev_info(&usb_dev->dev, "Firmware: build %s\n", build);
-- 
2.34.1

Re: [PATCH v3] ieee802154: atusb: fix uninit value in atusb_set_extended_addr

[Alexander Aring]

Hi,

On Tue, Jan 4, 2022 at 1:28 PM Pavel Skripkin <paskripkin@gmail.com> wrote:
>
> Alexander reported a use of uninitialized value in
> atusb_set_extended_addr(), that is caused by reading 0 bytes via
> usb_control_msg().
>
> Fix it by validating if the number of bytes transferred is actually
> correct, since usb_control_msg() may read less bytes, than was requested
> by caller.
>
> Fail log:
>
> BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
> BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
> BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
> Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
>  ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
>  atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
>  atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
>  usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
>
> Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
> Reported-by: Alexander Potapenko <glider@google.com>
> Acked-by: Alexander Aring <aahringo@redhat.com>
> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
> ---
>
> Changes in v3:
>         - Changed atusb_control_msg() to usb_control_msg() in
>           atusb_get_and_show_build(), since request there may read various length
>           data
>

Thanks for catching this.

- Alex

Re: [PATCH v3] ieee802154: atusb: fix uninit value in atusb_set_extended_addr

[Stefan Schmidt]

Hello.

On 04.01.22 19:57, Alexander Aring wrote:
> Hi,
> 
> On Tue, Jan 4, 2022 at 1:28 PM Pavel Skripkin <paskripkin@gmail.com> wrote:
>>
>> Alexander reported a use of uninitialized value in
>> atusb_set_extended_addr(), that is caused by reading 0 bytes via
>> usb_control_msg().
>>
>> Fix it by validating if the number of bytes transferred is actually
>> correct, since usb_control_msg() may read less bytes, than was requested
>> by caller.
>>
>> Fail log:
>>
>> BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
>> BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
>> BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
>> Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
>>   ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
>>   atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
>>   atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
>>   usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
>>
>> Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
>> Reported-by: Alexander Potapenko <glider@google.com>
>> Acked-by: Alexander Aring <aahringo@redhat.com>
>> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
>> ---
>>
>> Changes in v3:
>>          - Changed atusb_control_msg() to usb_control_msg() in
>>            atusb_get_and_show_build(), since request there may read various length
>>            data
>>
> 
> Thanks for catching this.

Test passed my testing.


This patch has been applied to the wpan tree and will be
part of the next pull request to net. Thanks!

regards
Stefan Schmidt

Re: [PATCH RFT] ieee802154: atusb: move to new USB API

[Greg KH]

On Sun, Jan 02, 2022 at 05:15:38PM -0500, Alexander Aring wrote:
> Hi,
> 
> On Sun, 2 Jan 2022 at 12:19, Pavel Skripkin <paskripkin@gmail.com> wrote:
> >
> > Alexander reported a use of uninitialized value in
> > atusb_set_extended_addr(), that is caused by reading 0 bytes via
> > usb_control_msg().
> >
> 
> Does there exist no way to check on this and return an error on USB
> API caller level?
> 
> > Since there is an API, that cannot read less bytes, than was requested,
> > let's move atusb driver to use it. It will fix all potintial bugs with
> > uninit values and make code more modern
> >
> 
> If this is not possible to fix with the "old" USB API then I think the
> "old" USB API needs to be fixed.

We can not get rid of the "old" api calls, as sometimes they are needed
for some corner cases where you want to know if you read/wrote a
shorter/larger message than expected.

> Changing to the new USB API as "making the code more modern" is a new
> feature and is a candidate for next.

Fixing bugs is a good thing to do no matter when it happens.

thanks,

greg k-h

Re: [PATCH RFT] ieee802154: atusb: move to new USB API

[Greg KH]

On Sun, Jan 02, 2022 at 08:19:43PM +0300, Pavel Skripkin wrote:
> Alexander reported a use of uninitialized value in
> atusb_set_extended_addr(), that is caused by reading 0 bytes via
> usb_control_msg().
> 
> Since there is an API, that cannot read less bytes, than was requested,
> let's move atusb driver to use it. It will fix all potintial bugs with
> uninit values and make code more modern
> 
> Fail log:
> 
> BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
> BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
> BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
> Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
>  ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
>  atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
>  atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
>  usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
> 
> Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
> Cc: stable@vger.kernel.org # 5.9
> Reported-by: Alexander Potapenko <glider@google.com>
> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
> ---
>  drivers/net/ieee802154/atusb.c | 61 +++++++++++++++++++++-------------
>  1 file changed, 38 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
> index 23ee0b14cbfa..43befea0110f 100644
> --- a/drivers/net/ieee802154/atusb.c
> +++ b/drivers/net/ieee802154/atusb.c
> @@ -80,10 +80,9 @@ struct atusb_chip_data {
>   * in atusb->err and reject all subsequent requests until the error is cleared.
>   */
>  
> -static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
> -			     __u8 request, __u8 requesttype,
> -			     __u16 value, __u16 index,
> -			     void *data, __u16 size, int timeout)
> +static int atusb_control_msg_recv(struct atusb *atusb, __u8 request, __u8 requesttype,
> +				  __u16 value, __u16 index,
> +				  void *data, __u16 size, int timeout)

Why do you need a wrapper function at all?  Why not just call the real
usb functions instead?

>  {
>  	struct usb_device *usb_dev = atusb->usb_dev;
>  	int ret;
> @@ -91,8 +90,30 @@ static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
>  	if (atusb->err)
>  		return atusb->err;
>  
> -	ret = usb_control_msg(usb_dev, pipe, request, requesttype,
> -			      value, index, data, size, timeout);
> +	ret = usb_control_msg_recv(usb_dev, 0, request, requesttype,
> +				   value, index, data, size, timeout, GFP_KERNEL);
> +	if (ret < 0) {
> +		atusb->err = ret;
> +		dev_err(&usb_dev->dev,
> +			"%s: req 0x%02x val 0x%x idx 0x%x, error %d\n",
> +			__func__, request, value, index, ret);
> +	}

Why save off the error value at all?  And was that message needed?


> +
> +	return ret;
> +}
> +
> +static int atusb_control_msg_send(struct atusb *atusb, __u8 request, __u8 requesttype,
> +				  __u16 value, __u16 index,
> +				  void *data, __u16 size, int timeout)
> +{
> +	struct usb_device *usb_dev = atusb->usb_dev;
> +	int ret;
> +
> +	if (atusb->err)
> +		return atusb->err;
> +
> +	ret = usb_control_msg_send(usb_dev, 0, request, requesttype,
> +				   value, index, data, size, timeout, GFP_KERNEL);
>  	if (ret < 0) {
>  		atusb->err = ret;
>  		dev_err(&usb_dev->dev,
> @@ -107,8 +128,7 @@ static int atusb_command(struct atusb *atusb, u8 cmd, u8 arg)
>  	struct usb_device *usb_dev = atusb->usb_dev;
>  
>  	dev_dbg(&usb_dev->dev, "%s: cmd = 0x%x\n", __func__, cmd);
> -	return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
> -				 cmd, ATUSB_REQ_TO_DEV, arg, 0, NULL, 0, 1000);
> +	return atusb_control_msg_send(atusb, cmd, ATUSB_REQ_TO_DEV, arg, 0, NULL, 0, 1000);
>  }
>  
>  static int atusb_write_reg(struct atusb *atusb, u8 reg, u8 value)
> @@ -116,9 +136,8 @@ static int atusb_write_reg(struct atusb *atusb, u8 reg, u8 value)
>  	struct usb_device *usb_dev = atusb->usb_dev;
>  
>  	dev_dbg(&usb_dev->dev, "%s: 0x%02x <- 0x%02x\n", __func__, reg, value);
> -	return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
> -				 ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
> -				 value, reg, NULL, 0, 1000);
> +	return atusb_control_msg_send(atusb, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
> +				      value, reg, NULL, 0, 1000);

This return value can be different, are you sure you want to call this
this way?

I would recommend just moving to use the real USB functions and no
wrapper function at all like this, it will make things more obvious and
easier to understand over time.

thanks,

greg k-h

Re: [PATCH RFT] ieee802154: atusb: move to new USB API

[Alexander Aring]

Hi,

On Mon, 3 Jan 2022 at 08:03, Greg KH <greg@kroah.com> wrote:
>
> On Sun, Jan 02, 2022 at 08:19:43PM +0300, Pavel Skripkin wrote:
> > Alexander reported a use of uninitialized value in
> > atusb_set_extended_addr(), that is caused by reading 0 bytes via
> > usb_control_msg().
> >
> > Since there is an API, that cannot read less bytes, than was requested,
> > let's move atusb driver to use it. It will fix all potintial bugs with
> > uninit values and make code more modern
> >
> > Fail log:
> >
> > BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
> > BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
> > BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
> > Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
> >  ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
> >  atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
> >  atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
> >  usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
> >
> > Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
> > Cc: stable@vger.kernel.org # 5.9
> > Reported-by: Alexander Potapenko <glider@google.com>
> > Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
> > ---
> >  drivers/net/ieee802154/atusb.c | 61 +++++++++++++++++++++-------------
> >  1 file changed, 38 insertions(+), 23 deletions(-)
> >
> > diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
> > index 23ee0b14cbfa..43befea0110f 100644
> > --- a/drivers/net/ieee802154/atusb.c
> > +++ b/drivers/net/ieee802154/atusb.c
> > @@ -80,10 +80,9 @@ struct atusb_chip_data {
> >   * in atusb->err and reject all subsequent requests until the error is cleared.
> >   */
> >
> > -static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
> > -                          __u8 request, __u8 requesttype,
> > -                          __u16 value, __u16 index,
> > -                          void *data, __u16 size, int timeout)
> > +static int atusb_control_msg_recv(struct atusb *atusb, __u8 request, __u8 requesttype,
> > +                               __u16 value, __u16 index,
> > +                               void *data, __u16 size, int timeout)
>
> Why do you need a wrapper function at all?  Why not just call the real
> usb functions instead?
>

This driver has a lot of history, there is a comment which states:

"To reduce the number of error checks in the code, we record the first
error in atusb->err and reject all subsequent requests until the error
is cleared."

I think in the early state of this driver (as it was acting more as an
USB<->SPI bridge) there was a lot of state handling involved. Nowadays
we have a lot of such handling inside the device firmware (which is
btw. open source). This might be not an excuse but an explanation why
it was introduced in such a way.

...
>
> I would recommend just moving to use the real USB functions and no
> wrapper function at all like this, it will make things more obvious and
> easier to understand over time.

okay.

- Alex

Re: [PATCH RFT] ieee802154: atusb: move to new USB API

[Stefan Schmidt]

Hello.

On 03.01.22 16:35, Alexander Aring wrote:
> Hi,
> 
> On Mon, 3 Jan 2022 at 08:03, Greg KH <greg@kroah.com> wrote:
>>
>> On Sun, Jan 02, 2022 at 08:19:43PM +0300, Pavel Skripkin wrote:
>>> Alexander reported a use of uninitialized value in
>>> atusb_set_extended_addr(), that is caused by reading 0 bytes via
>>> usb_control_msg().
>>>
>>> Since there is an API, that cannot read less bytes, than was requested,
>>> let's move atusb driver to use it. It will fix all potintial bugs with
>>> uninit values and make code more modern
>>>
>>> Fail log:
>>>
>>> BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
>>> BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
>>> BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
>>> Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
>>>   ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
>>>   atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
>>>   atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
>>>   usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
>>>
>>> Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
>>> Cc: stable@vger.kernel.org # 5.9
>>> Reported-by: Alexander Potapenko <glider@google.com>
>>> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
>>> ---
>>>   drivers/net/ieee802154/atusb.c | 61 +++++++++++++++++++++-------------
>>>   1 file changed, 38 insertions(+), 23 deletions(-)
>>>
>>> diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
>>> index 23ee0b14cbfa..43befea0110f 100644
>>> --- a/drivers/net/ieee802154/atusb.c
>>> +++ b/drivers/net/ieee802154/atusb.c
>>> @@ -80,10 +80,9 @@ struct atusb_chip_data {
>>>    * in atusb->err and reject all subsequent requests until the error is cleared.
>>>    */
>>>
>>> -static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
>>> -                          __u8 request, __u8 requesttype,
>>> -                          __u16 value, __u16 index,
>>> -                          void *data, __u16 size, int timeout)
>>> +static int atusb_control_msg_recv(struct atusb *atusb, __u8 request, __u8 requesttype,
>>> +                               __u16 value, __u16 index,
>>> +                               void *data, __u16 size, int timeout)
>>
>> Why do you need a wrapper function at all?  Why not just call the real
>> usb functions instead?

> ...

>>
>> I would recommend just moving to use the real USB functions and no
>> wrapper function at all like this, it will make things more obvious and
>> easier to understand over time.
> 
> okay.

With the small fix handle the actual KASAN report applied now I am happy 
to work with Pavel to get a patch using the newer USB API tested and 
applied for -next.

Pavel would you be willing to update your patch with the complete 
removal of the atusb usb wrapper functions? Like Greg suggested. That 
plus the porting to the newer USB API should be a good step forward.

Happy to review and test your patches.

regards
Stefan Schmidt

Re: [PATCH RFT] ieee802154: atusb: move to new USB API

[Greg KH]

On Tue, Jan 04, 2022 at 08:41:23PM +0100, Stefan Schmidt wrote:
> Hello.
> 
> On 03.01.22 16:35, Alexander Aring wrote:
> > Hi,
> > 
> > On Mon, 3 Jan 2022 at 08:03, Greg KH <greg@kroah.com> wrote:
> > > 
> > > On Sun, Jan 02, 2022 at 08:19:43PM +0300, Pavel Skripkin wrote:
> > > > Alexander reported a use of uninitialized value in
> > > > atusb_set_extended_addr(), that is caused by reading 0 bytes via
> > > > usb_control_msg().
> > > > 
> > > > Since there is an API, that cannot read less bytes, than was requested,
> > > > let's move atusb driver to use it. It will fix all potintial bugs with
> > > > uninit values and make code more modern
> > > > 
> > > > Fail log:
> > > > 
> > > > BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
> > > > BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
> > > > BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
> > > > Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
> > > >   ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
> > > >   atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
> > > >   atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
> > > >   usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
> > > > 
> > > > Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
> > > > Cc: stable@vger.kernel.org # 5.9
> > > > Reported-by: Alexander Potapenko <glider@google.com>
> > > > Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
> > > > ---
> > > >   drivers/net/ieee802154/atusb.c | 61 +++++++++++++++++++++-------------
> > > >   1 file changed, 38 insertions(+), 23 deletions(-)
> > > > 
> > > > diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
> > > > index 23ee0b14cbfa..43befea0110f 100644
> > > > --- a/drivers/net/ieee802154/atusb.c
> > > > +++ b/drivers/net/ieee802154/atusb.c
> > > > @@ -80,10 +80,9 @@ struct atusb_chip_data {
> > > >    * in atusb->err and reject all subsequent requests until the error is cleared.
> > > >    */
> > > > 
> > > > -static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
> > > > -                          __u8 request, __u8 requesttype,
> > > > -                          __u16 value, __u16 index,
> > > > -                          void *data, __u16 size, int timeout)
> > > > +static int atusb_control_msg_recv(struct atusb *atusb, __u8 request, __u8 requesttype,
> > > > +                               __u16 value, __u16 index,
> > > > +                               void *data, __u16 size, int timeout)
> > > 
> > > Why do you need a wrapper function at all?  Why not just call the real
> > > usb functions instead?
> 
> > ...
> 
> > > 
> > > I would recommend just moving to use the real USB functions and no
> > > wrapper function at all like this, it will make things more obvious and
> > > easier to understand over time.
> > 
> > okay.
> 
> With the small fix handle the actual KASAN report applied now

It was?  What is the git commit id?

thanks,

greg k-h

Re: [PATCH RFT] ieee802154: atusb: move to new USB API

[Stefan Schmidt]

Hello.

On 05.01.22 09:08, Greg KH wrote:
> On Tue, Jan 04, 2022 at 08:41:23PM +0100, Stefan Schmidt wrote:
>> Hello.
>>
>> On 03.01.22 16:35, Alexander Aring wrote:
>>> Hi,
>>>
>>> On Mon, 3 Jan 2022 at 08:03, Greg KH <greg@kroah.com> wrote:
>>>>
>>>> On Sun, Jan 02, 2022 at 08:19:43PM +0300, Pavel Skripkin wrote:
>>>>> Alexander reported a use of uninitialized value in
>>>>> atusb_set_extended_addr(), that is caused by reading 0 bytes via
>>>>> usb_control_msg().
>>>>>
>>>>> Since there is an API, that cannot read less bytes, than was requested,
>>>>> let's move atusb driver to use it. It will fix all potintial bugs with
>>>>> uninit values and make code more modern
>>>>>
>>>>> Fail log:
>>>>>
>>>>> BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
>>>>> BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
>>>>> BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
>>>>> Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
>>>>>    ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
>>>>>    atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
>>>>>    atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
>>>>>    usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
>>>>>
>>>>> Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
>>>>> Cc: stable@vger.kernel.org # 5.9
>>>>> Reported-by: Alexander Potapenko <glider@google.com>
>>>>> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
>>>>> ---
>>>>>    drivers/net/ieee802154/atusb.c | 61 +++++++++++++++++++++-------------
>>>>>    1 file changed, 38 insertions(+), 23 deletions(-)
>>>>>
>>>>> diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
>>>>> index 23ee0b14cbfa..43befea0110f 100644
>>>>> --- a/drivers/net/ieee802154/atusb.c
>>>>> +++ b/drivers/net/ieee802154/atusb.c
>>>>> @@ -80,10 +80,9 @@ struct atusb_chip_data {
>>>>>     * in atusb->err and reject all subsequent requests until the error is cleared.
>>>>>     */
>>>>>
>>>>> -static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
>>>>> -                          __u8 request, __u8 requesttype,
>>>>> -                          __u16 value, __u16 index,
>>>>> -                          void *data, __u16 size, int timeout)
>>>>> +static int atusb_control_msg_recv(struct atusb *atusb, __u8 request, __u8 requesttype,
>>>>> +                               __u16 value, __u16 index,
>>>>> +                               void *data, __u16 size, int timeout)
>>>>
>>>> Why do you need a wrapper function at all?  Why not just call the real
>>>> usb functions instead?
>>
>>> ...
>>
>>>>
>>>> I would recommend just moving to use the real USB functions and no
>>>> wrapper function at all like this, it will make things more obvious and
>>>> easier to understand over time.
>>>
>>> okay.
>>
>> With the small fix handle the actual KASAN report applied now
> 
> It was?  What is the git commit id?

I applied it to my wpan tree from where it will go to the net tree with 
my next pull request.

https://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan.git/commit/?id=754e4382354f7908923a1949d8dc8d05f82f09cb

regards
Stefan Schmidt