From: "Russell King (Oracle)" <linux@armlinux.org.uk>
To: Jeremy Linton <jeremy.linton@arm.com>
Cc: netdev@vger.kernel.org, mw@semihalf.com, davem@davemloft.net,
kuba@kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [BUG/PATCH v2] net: mvpp2: always set port pcs ops
Date: Sat, 12 Feb 2022 10:00:10 +0000 [thread overview]
Message-ID: <YgeFKsRjlxNiJbSa@shell.armlinux.org.uk> (raw)
In-Reply-To: <20220212003454.3214726-1-jeremy.linton@arm.com>
On Fri, Feb 11, 2022 at 06:34:54PM -0600, Jeremy Linton wrote:
> Booting a MACCHIATObin with 5.17, the system OOPs with
> a null pointer deref when the network is started. This
> is caused by the pcs->ops structure being null in
> mcpp2_acpi_start() when it tries to call pcs_config().
>
> Hoisting the code which sets pcs_gmac.ops and pcs_xlg.ops,
> assuring they are always set, fixes the problem.
>
> The OOPs looks like:
> [ 18.687760] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000010
> [ 18.698561] Mem abort info:
> [ 18.698564] ESR = 0x96000004
> [ 18.698567] EC = 0x25: DABT (current EL), IL = 32 bits
> [ 18.709821] SET = 0, FnV = 0
> [ 18.714292] EA = 0, S1PTW = 0
> [ 18.718833] FSC = 0x04: level 0 translation fault
> [ 18.725126] Data abort info:
> [ 18.729408] ISV = 0, ISS = 0x00000004
> [ 18.734655] CM = 0, WnR = 0
> [ 18.738933] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111bbf000
> [ 18.745409] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000
> [ 18.752235] Internal error: Oops: 96000004 [#1] SMP
> [ 18.757134] Modules linked in: rfkill ip_set nf_tables nfnetlink qrtr sunrpc vfat fat omap_rng fuse zram xfs crct10dif_ce mvpp2 ghash_ce sbsa_gwdt phylink xhci_plat_hcd ahci_plam
> [ 18.773481] CPU: 0 PID: 681 Comm: NetworkManager Not tainted 5.17.0-0.rc3.89.fc36.aarch64 #1
> [ 18.781954] Hardware name: Marvell Armada 7k/8k Family Board /Armada 7k/8k Family Board , BIOS EDK II Jun 4 2019
> [ 18.795222] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [ 18.802213] pc : mvpp2_start_dev+0x2b0/0x300 [mvpp2]
> [ 18.807208] lr : mvpp2_start_dev+0x298/0x300 [mvpp2]
> [ 18.812197] sp : ffff80000b4732c0
> [ 18.815522] x29: ffff80000b4732c0 x28: 0000000000000000 x27: ffffccab38ae57f8
> [ 18.822689] x26: ffff6eeb03065a10 x25: ffff80000b473a30 x24: ffff80000b4735b8
> [ 18.829855] x23: 0000000000000000 x22: 00000000000001e0 x21: ffff6eeb07b6ab68
> [ 18.837021] x20: ffff6eeb07b6ab30 x19: ffff6eeb07b6a9c0 x18: 0000000000000014
> [ 18.844187] x17: 00000000f6232bfe x16: ffffccab899b1dc0 x15: 000000006a30f9fa
> [ 18.851353] x14: 000000003b77bd50 x13: 000006dc896f0e8e x12: 001bbbfccfd0d3a2
> [ 18.858519] x11: 0000000000001528 x10: 0000000000001548 x9 : ffffccab38ad0fb0
> [ 18.865685] x8 : ffff80000b473330 x7 : 0000000000000000 x6 : 0000000000000000
> [ 18.872851] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000b4732f8
> [ 18.880017] x2 : 000000000000001a x1 : 0000000000000002 x0 : ffff6eeb07b6ab68
> [ 18.887183] Call trace:
> [ 18.889637] mvpp2_start_dev+0x2b0/0x300 [mvpp2]
> [ 18.894279] mvpp2_open+0x134/0x2b4 [mvpp2]
> [ 18.898483] __dev_open+0x128/0x1e4
> [ 18.901988] __dev_change_flags+0x17c/0x1d0
> [ 18.906187] dev_change_flags+0x30/0x70
> [ 18.910038] do_setlink+0x278/0xa7c
> [ 18.913540] __rtnl_newlink+0x44c/0x7d0
> [ 18.917391] rtnl_newlink+0x5c/0x8c
> [ 18.920892] rtnetlink_rcv_msg+0x254/0x314
> [ 18.925006] netlink_rcv_skb+0x48/0x10c
> [ 18.928858] rtnetlink_rcv+0x24/0x30
> [ 18.932449] netlink_unicast+0x290/0x2f4
> [ 18.936386] netlink_sendmsg+0x1d0/0x41c
> [ 18.940323] sock_sendmsg+0x60/0x70
> [ 18.943825] ____sys_sendmsg+0x248/0x260
> [ 18.947762] ___sys_sendmsg+0x74/0xa0
> [ 18.951438] __sys_sendmsg+0x64/0xcc
> [ 18.955027] __arm64_sys_sendmsg+0x30/0x40
> [ 18.959140] invoke_syscall+0x50/0x120
> [ 18.962906] el0_svc_common.constprop.0+0x4c/0xf4
> [ 18.967629] do_el0_svc+0x30/0x9c
> [ 18.970958] el0_svc+0x28/0xb0
> [ 18.974025] el0t_64_sync_handler+0x10c/0x140
> [ 18.978400] el0t_64_sync+0x1a4/0x1a8
> [ 18.982078] Code: 52800004 b9416262 aa1503e0 52800041 (f94008a5)
> [ 18.988196] ---[ end trace 0000000000000000 ]---
>
> Fixes: cff056322372 ("net: mvpp2: use .mac_select_pcs() interface")
> Suggested-by: Russel King (Oracle) <rmk+kernel@armlinux.org.uk>
Please spell my name correctly, especially in attributations. I really
don't want this committed with this mistake.
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
> drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> index 7cdbf8b8bbf6..1a835b48791b 100644
> --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> @@ -6870,6 +6870,9 @@ static int mvpp2_port_probe(struct platform_device *pdev,
> dev->max_mtu = MVPP2_BM_JUMBO_PKT_SIZE;
> dev->dev.of_node = port_node;
>
> + port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
> + port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
> +
> if (!mvpp2_use_acpi_compat_mode(port_fwnode)) {
> port->phylink_config.dev = &dev->dev;
> port->phylink_config.type = PHYLINK_NETDEV;
> @@ -6940,9 +6943,6 @@ static int mvpp2_port_probe(struct platform_device *pdev,
> port->phylink_config.supported_interfaces);
> }
>
> - port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
> - port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
> -
> phylink = phylink_create(&port->phylink_config, port_fwnode,
> phy_mode, &mvpp2_phylink_ops);
> if (IS_ERR(phylink)) {
> --
> 2.34.1
>
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
next prev parent reply other threads:[~2022-02-12 10:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-12 0:34 [BUG/PATCH v2] net: mvpp2: always set port pcs ops Jeremy Linton
2022-02-12 10:00 ` Russell King (Oracle) [this message]
2022-02-14 23:41 ` Jeremy Linton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YgeFKsRjlxNiJbSa@shell.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=davem@davemloft.net \
--cc=jeremy.linton@arm.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mw@semihalf.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).