Re: [PATCH net-next 6/6] net: phy: added ethtool master-slave configuration support

[Andrew Lunn <andrew@lunn.ch>]

> +static int lan87xx_read_master_slave(struct phy_device *phydev)
> +{
> +	int rc = 0;
> +
> +	phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
> +	phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
> +
> +	rc = phy_read(phydev, MII_CTRL1000);
> +	if (rc < 0)
> +		return rc;
> +
> +	if (rc & CTL1000_AS_MASTER)
> +		phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE;
> +	else
> +		phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE;
> +
> +	rc = phy_read(phydev, MII_STAT1000);
> +	if (rc < 0)
> +		return rc;
> +
> +	if (rc & LPA_1000MSRES)
> +		phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
> +	else
> +		phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
> +
> +	return rc;
> +}

It looks like you can just call genphy_read_master_slave()? Or am i
missing some subtle difference?

> +static int lan87xx_config_aneg(struct phy_device *phydev)
> +{
> +	u16 ctl = 0;
> +	int rc;
> +
> +	switch (phydev->master_slave_set) {
> +	case MASTER_SLAVE_CFG_MASTER_FORCE:
> +		ctl |= CTL1000_AS_MASTER;
> +		break;
> +	case MASTER_SLAVE_CFG_SLAVE_FORCE:
> +		break;
> +	case MASTER_SLAVE_CFG_UNKNOWN:
> +	case MASTER_SLAVE_CFG_UNSUPPORTED:
> +		return 0;
> +	default:
> +		phydev_warn(phydev, "Unsupported Master/Slave mode\n");
> +		return -EOPNOTSUPP;
> +	}
> +
> +	rc = phy_modify_changed(phydev, MII_CTRL1000, CTL1000_AS_MASTER, ctl);
> +	if (rc == 1)
> +		rc = genphy_soft_reset(phydev);
> +
> +	return rc;
> +}

Please use genphy_setup_master_slave()

       Andrew