netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
To: "Toke Høiland-Jørgensen" <toke@redhat.com>
Cc: Lorenzo Bianconi <lorenzo@kernel.org>,
	bpf@vger.kernel.org, netdev@vger.kernel.org, davem@davemloft.net,
	kuba@kernel.org, ast@kernel.org, daniel@iogearbox.net,
	brouer@redhat.com, pabeni@redhat.com, echaudro@redhat.com,
	toshiaki.makita1@gmail.com, andrii@kernel.org
Subject: Re: [PATCH v4 bpf-next 3/3] veth: allow jumbo frames in xdp mode
Date: Thu, 10 Mar 2022 16:06:01 +0100	[thread overview]
Message-ID: <YioT2TGc8M42V2K2@lore-desk> (raw)
In-Reply-To: <87bkyeujrv.fsf@toke.dk>

[-- Attachment #1: Type: text/plain, Size: 4467 bytes --]

> Lorenzo Bianconi <lorenzo@kernel.org> writes:
> 
> > Allow increasing the MTU over page boundaries on veth devices
> > if the attached xdp program declares to support xdp fragments.
> > Enable NETIF_F_ALL_TSO when the device is running in xdp mode.
> >
> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> > ---
> >  drivers/net/veth.c | 28 +++++++++++++++++-----------
> >  1 file changed, 17 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/net/veth.c b/drivers/net/veth.c
> > index 47b21b1d2fd9..c5a2dc2b2e4b 100644
> > --- a/drivers/net/veth.c
> > +++ b/drivers/net/veth.c
> > @@ -293,8 +293,7 @@ static int veth_forward_skb(struct net_device *dev, struct sk_buff *skb,
> >  /* return true if the specified skb has chances of GRO aggregation
> >   * Don't strive for accuracy, but try to avoid GRO overhead in the most
> >   * common scenarios.
> > - * When XDP is enabled, all traffic is considered eligible, as the xmit
> > - * device has TSO off.
> > + * When XDP is enabled, all traffic is considered eligible.
> >   * When TSO is enabled on the xmit device, we are likely interested only
> >   * in UDP aggregation, explicitly check for that if the skb is suspected
> >   * - the sock_wfree destructor is used by UDP, ICMP and XDP sockets -
> > @@ -302,11 +301,13 @@ static int veth_forward_skb(struct net_device *dev, struct sk_buff *skb,
> >   */
> >  static bool veth_skb_is_eligible_for_gro(const struct net_device *dev,
> >  					 const struct net_device *rcv,
> > +					 const struct veth_rq *rq,
> >  					 const struct sk_buff *skb)
> >  {
> > -	return !(dev->features & NETIF_F_ALL_TSO) ||
> > -		(skb->destructor == sock_wfree &&
> > -		 rcv->features & (NETIF_F_GRO_FRAGLIST | NETIF_F_GRO_UDP_FWD));
> > +	return rcu_access_pointer(rq->xdp_prog) ||
> > +	       !(dev->features & NETIF_F_ALL_TSO) ||
> > +	       (skb->destructor == sock_wfree &&
> > +		rcv->features & (NETIF_F_GRO_FRAGLIST | NETIF_F_GRO_UDP_FWD));
> >  }
> >  
> >  static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev)
> > @@ -335,7 +336,7 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev)
> >  		 * Don't bother with napi/GRO if the skb can't be aggregated
> >  		 */
> >  		use_napi = rcu_access_pointer(rq->napi) &&
> > -			   veth_skb_is_eligible_for_gro(dev, rcv, skb);
> > +			   veth_skb_is_eligible_for_gro(dev, rcv, rq, skb);
> >  	}
> >  
> >  	skb_tx_timestamp(skb);
> > @@ -1525,9 +1526,14 @@ static int veth_xdp_set(struct net_device *dev, struct bpf_prog *prog,
> >  			goto err;
> >  		}
> >  
> > -		max_mtu = PAGE_SIZE - VETH_XDP_HEADROOM -
> > -			  peer->hard_header_len -
> > -			  SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
> > +		max_mtu = SKB_WITH_OVERHEAD(PAGE_SIZE - VETH_XDP_HEADROOM) -
> > +			  peer->hard_header_len;
> 
> Why are we no longer accounting the size of the skb_shared_info if the
> program doesn't support frags?

doing so we do not allow packets over page boundaries (so non-linear xdp_buff)
if the attached program does not delclare to support them, right?

> 
> > +		/* Allow increasing the max_mtu if the program supports
> > +		 * XDP fragments.
> > +		 */
> > +		if (prog->aux->xdp_has_frags)
> > +			max_mtu += PAGE_SIZE * MAX_SKB_FRAGS;
> > +
> >  		if (peer->mtu > max_mtu) {
> >  			NL_SET_ERR_MSG_MOD(extack, "Peer MTU is too large to set XDP");
> >  			err = -ERANGE;
> > @@ -1549,7 +1555,7 @@ static int veth_xdp_set(struct net_device *dev, struct bpf_prog *prog,
> >  		}
> >  
> >  		if (!old_prog) {
> > -			peer->hw_features &= ~NETIF_F_GSO_SOFTWARE;
> > +			peer->hw_features &= ~NETIF_F_GSO_FRAGLIST;
> 
> The patch description says we're enabling TSO, but this change enables a
> couple of other flags as well. Also, it's not quite obvious to me why
> your change makes this possible? Is it because we can now execute XDP on
> a full TSO packet at once? Because then this should be coupled to the
> xdp_has_frags flag of the XDP program? Or will the TSO packet be
> segmented before it hits the XDP program? But then this change has
> nothing to do with the rest of your series?

actually tso support is not mandatory for this feature (even if it is probably
meaningful). I will drop it from v5 and we can take care of it in a susequent
patch.

Regards,
Lorenzo

> 
> Please also add this explanation to the commit message :)
> 
> -Toke
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2022-03-10 15:11 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-08 16:05 [PATCH v4 bpf-next 0/3] introduce xdp frags support to veth driver Lorenzo Bianconi
2022-03-08 16:05 ` [PATCH v4 bpf-next 1/3] net: veth: account total xdp_frame len running ndo_xdp_xmit Lorenzo Bianconi
2022-03-10 11:10   ` Toke Høiland-Jørgensen
2022-03-15  5:32   ` John Fastabend
2022-03-08 16:05 ` [PATCH v4 bpf-next 2/3] veth: rework veth_xdp_rcv_skb in order to accept non-linear skb Lorenzo Bianconi
2022-03-10 11:21   ` Toke Høiland-Jørgensen
2022-03-10 11:43     ` Lorenzo Bianconi
2022-03-10 19:06       ` Toke Høiland-Jørgensen
2022-03-10 19:26         ` Lorenzo Bianconi
2022-03-10 23:46           ` Lorenzo Bianconi
2022-03-12 21:18         ` Jakub Kicinski
2022-03-08 16:06 ` [PATCH v4 bpf-next 3/3] veth: allow jumbo frames in xdp mode Lorenzo Bianconi
2022-03-10 11:30   ` Toke Høiland-Jørgensen
2022-03-10 15:06     ` Lorenzo Bianconi [this message]
2022-03-10 18:53       ` Toke Høiland-Jørgensen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YioT2TGc8M42V2K2@lore-desk \
    --to=lorenzo.bianconi@redhat.com \
    --cc=andrii@kernel.org \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=brouer@redhat.com \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=echaudro@redhat.com \
    --cc=kuba@kernel.org \
    --cc=lorenzo@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=toke@redhat.com \
    --cc=toshiaki.makita1@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).