Re: [PATCH V3 net-next 4/4] selftests: forwarding: add test of MAC-Auth Bypass to locked port tests

[Ido Schimmel <idosch@idosch.org>]

On Tue, May 24, 2022 at 05:21:44PM +0200, Hans Schultz wrote:
> Verify that the MAC-Auth mechanism works by adding a FDB entry with the
> locked flag set. denying access until the FDB entry is replaced with a
> FDB entry without the locked flag set.
> 
> Signed-off-by: Hans Schultz <schultz.hans+netdev@gmail.com>
> ---
>  .../net/forwarding/bridge_locked_port.sh      | 42 ++++++++++++++++---
>  1 file changed, 36 insertions(+), 6 deletions(-)
> 
> diff --git a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
> index 5b02b6b60ce7..50b9048d044a 100755
> --- a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
> +++ b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
> @@ -1,7 +1,7 @@
>  #!/bin/bash
>  # SPDX-License-Identifier: GPL-2.0
>  
> -ALL_TESTS="locked_port_ipv4 locked_port_ipv6 locked_port_vlan"
> +ALL_TESTS="locked_port_ipv4 locked_port_ipv6 locked_port_vlan locked_port_mab"
>  NUM_NETIFS=4
>  CHECK_TC="no"
>  source lib.sh
> @@ -94,13 +94,13 @@ locked_port_ipv4()
>  	ping_do $h1 192.0.2.2
>  	check_fail $? "Ping worked after locking port, but before adding FDB entry"
>  
> -	bridge fdb add `mac_get $h1` dev $swp1 master static
> +	bridge fdb replace `mac_get $h1` dev $swp1 master static
>  
>  	ping_do $h1 192.0.2.2
>  	check_err $? "Ping did not work after locking port and adding FDB entry"
>  
>  	bridge link set dev $swp1 locked off
> -	bridge fdb del `mac_get $h1` dev $swp1 master static
> +	bridge fdb del `mac_get $h1` dev $swp1 master
>  
>  	ping_do $h1 192.0.2.2
>  	check_err $? "Ping did not work after unlocking port and removing FDB entry."
> @@ -124,13 +124,13 @@ locked_port_vlan()
>  	ping_do $h1.100 198.51.100.2
>  	check_fail $? "Ping through vlan worked after locking port, but before adding FDB entry"
>  
> -	bridge fdb add `mac_get $h1` dev $swp1 vlan 100 master static
> +	bridge fdb replace `mac_get $h1` dev $swp1 master static
>  
>  	ping_do $h1.100 198.51.100.2
>  	check_err $? "Ping through vlan did not work after locking port and adding FDB entry"
>  
>  	bridge link set dev $swp1 locked off
> -	bridge fdb del `mac_get $h1` dev $swp1 vlan 100 master static
> +	bridge fdb del `mac_get $h1` dev $swp1 vlan 100 master
>  
>  	ping_do $h1.100 198.51.100.2
>  	check_err $? "Ping through vlan did not work after unlocking port and removing FDB entry"
> @@ -153,7 +153,8 @@ locked_port_ipv6()
>  	ping6_do $h1 2001:db8:1::2
>  	check_fail $? "Ping6 worked after locking port, but before adding FDB entry"
>  
> -	bridge fdb add `mac_get $h1` dev $swp1 master static
> +	bridge fdb replace `mac_get $h1` dev $swp1 master static
> +
>  	ping6_do $h1 2001:db8:1::2
>  	check_err $? "Ping6 did not work after locking port and adding FDB entry"
>  
> @@ -166,6 +167,35 @@ locked_port_ipv6()
>  	log_test "Locked port ipv6"
>  }

Why did you change s/add/replace/? Also, from the subject and commit
message I understand the patch is about adding a new test, not changing
existing ones.

>  
> +locked_port_mab()
> +{
> +	RET=0
> +	check_locked_port_support || return 0
> +
> +	ping_do $h1 192.0.2.2
> +	check_err $? "MAB: Ping did not work before locking port"
> +
> +	bridge link set dev $swp1 locked on
> +	bridge link set dev $swp1 learning on
> +
> +	bridge fdb del `mac_get $h1` dev $swp1 master

Why the delete is needed? Aren't you getting errors on trying to delete
a non-existing entry? In previous test cases learning is disabled and it
seems the FDB entry is cleaned up.

> +
> +	ping_do $h1 192.0.2.2
> +	check_fail $? "MAB: Ping worked on locked port without FDB entry"
> +
> +	bridge fdb show | grep `mac_get $h1` | grep -q "locked"
> +	check_err $? "MAB: No locked fdb entry after ping on locked port"
> +
> +	bridge fdb replace `mac_get $h1` dev $swp1 master static
> +
> +	ping_do $h1 192.0.2.2
> +	check_err $? "MAB: Ping did not work with fdb entry without locked flag"
> +
> +	bridge fdb del `mac_get $h1` dev $swp1 master

bridge link set dev $swp1 learning off

> +	bridge link set dev $swp1 locked off
> +
> +	log_test "Locked port MAB"
> +}
>  trap cleanup EXIT
>  
>  setup_prepare
> -- 
> 2.30.2
>