From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
To: John Fastabend <john.fastabend@gmail.com>
Cc: bpf@vger.kernel.org, ast@kernel.org, daniel@iogearbox.net,
netdev@vger.kernel.org, magnus.karlsson@intel.com,
bjorn@kernel.org, kuba@kernel.org
Subject: Re: [PATCH v4 bpf-next 03/10] ice: check DD bit on Rx descriptor rather than (EOP | RS)
Date: Mon, 20 Jun 2022 12:53:57 +0200 [thread overview]
Message-ID: <YrBRxeIXhmxBDOgr@boxer> (raw)
In-Reply-To: <62ad31611159b_24b3420829@john.notmuch>
On Fri, Jun 17, 2022 at 06:58:57PM -0700, John Fastabend wrote:
> Maciej Fijalkowski wrote:
> > Tx side sets EOP and RS bits on descriptors to indicate that a
> > particular descriptor is the last one and needs to generate an irq when
> > it was sent. These bits should not be checked on completion path
> > regardless whether it's the Tx or the Rx. DD bit serves this purpose and
> > it indicates that a particular descriptor is either for Rx or was
> > successfully Txed.
> >
> > Look at DD bit being set in ice_lbtest_receive_frames() instead of EOP
> > and RS pair.
> >
> > Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
>
> Is this a bugfix? If so it should go to bpf tree.
Previous logic worked without this patch by an accident, so I don't change
the behaviour of the loopback self test itself, therefore I was not sure
if this could be classified as a bugfix.
Rx descriptor's status_error0 field has ICE_RX_FLEX_DESC_STATUS0_DD_S and
ICE_RX_FLEX_DESC_STATUS0_EOF_S set, which have the following values:
enum ice_rx_flex_desc_status_error_0_bits {
/* Note: These are predefined bit offsets */
ICE_RX_FLEX_DESC_STATUS0_DD_S = 0,
ICE_RX_FLEX_DESC_STATUS0_EOF_S,
(...)
};
Old code was only ORing two following enums:
enum ice_tx_desc_cmd_bits {
ICE_TX_DESC_CMD_EOP = 0x0001,
ICE_TX_DESC_CMD_RS = 0x0002,
(...)
};
If BIT() was used around ICE_TX_DESC_CMD_EOP and ICE_TX_DESC_CMD_RS and if
they were checked separately then on RS bit we would fail.
(let me also check for EOF bit in next revision)
>
> > ---
> > drivers/net/ethernet/intel/ice/ice_ethtool.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
> > index 1e71b70f0e52..b6275a29fa0d 100644
> > --- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
> > +++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
> > @@ -658,7 +658,7 @@ static int ice_lbtest_receive_frames(struct ice_rx_ring *rx_ring)
> > rx_desc = ICE_RX_DESC(rx_ring, i);
> >
> > if (!(rx_desc->wb.status_error0 &
> > - cpu_to_le16(ICE_TX_DESC_CMD_EOP | ICE_TX_DESC_CMD_RS)))
> > + cpu_to_le16(BIT(ICE_RX_FLEX_DESC_STATUS0_DD_S))))
> > continue;
> >
> > rx_buf = &rx_ring->rx_buf[i];
> > --
> > 2.27.0
> >
>
>
next prev parent reply other threads:[~2022-06-20 10:54 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-16 18:05 [PATCH v4 bpf-next 00/10] AF_XDP ZC selftests Maciej Fijalkowski
2022-06-16 18:06 ` [PATCH v4 bpf-next 01/10] ice: compress branches in ice_set_features() Maciej Fijalkowski
2022-06-18 1:46 ` John Fastabend
2022-06-20 9:48 ` Maciej Fijalkowski
2022-06-16 18:06 ` [PATCH v4 bpf-next 02/10] ice: allow toggling loopback mode via ndo_set_features callback Maciej Fijalkowski
2022-06-16 18:21 ` Jakub Kicinski
2022-06-18 1:57 ` John Fastabend
2022-06-20 9:52 ` Maciej Fijalkowski
2022-06-16 18:06 ` [PATCH v4 bpf-next 03/10] ice: check DD bit on Rx descriptor rather than (EOP | RS) Maciej Fijalkowski
2022-06-18 1:58 ` John Fastabend
2022-06-20 10:53 ` Maciej Fijalkowski [this message]
2022-06-16 18:06 ` [PATCH v4 bpf-next 04/10] ice: do not setup vlan for loopback VSI Maciej Fijalkowski
2022-06-18 2:01 ` John Fastabend
2022-06-16 18:06 ` [PATCH v4 bpf-next 05/10] selftests: xsk: query for native XDP support Maciej Fijalkowski
2022-06-18 2:12 ` John Fastabend
2022-06-20 10:55 ` Maciej Fijalkowski
2022-06-16 18:06 ` [PATCH v4 bpf-next 06/10] selftests: xsk: add missing close() on netns fd Maciej Fijalkowski
2022-06-18 2:14 ` John Fastabend
2022-06-16 18:06 ` [PATCH v4 bpf-next 07/10] selftests: xsk: introduce default Rx pkt stream Maciej Fijalkowski
2022-06-18 2:41 ` John Fastabend
2022-06-20 8:41 ` Magnus Karlsson
2022-06-16 18:06 ` [PATCH v4 bpf-next 08/10] selftests: xsk: add support for executing tests on physical device Maciej Fijalkowski
2022-06-16 18:06 ` [PATCH v4 bpf-next 09/10] selftests: xsk: rely on pkts_in_flight in wait_for_tx_completion() Maciej Fijalkowski
2022-06-18 2:56 ` John Fastabend
2022-06-20 12:02 ` Maciej Fijalkowski
2022-06-20 16:36 ` John Fastabend
2022-06-16 18:06 ` [PATCH v4 bpf-next 10/10] selftests: xsk: add support for zero copy testing Maciej Fijalkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YrBRxeIXhmxBDOgr@boxer \
--to=maciej.fijalkowski@intel.com \
--cc=ast@kernel.org \
--cc=bjorn@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=john.fastabend@gmail.com \
--cc=kuba@kernel.org \
--cc=magnus.karlsson@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).